GitHub - hubyhuby/qt: Qt binding for Go (Golang) with support for Windows / macOS / Linux / Android / iOS / Sailfish OS / Raspberry Pi / AsteroidOS

Introduction

Qt is a cross-platform application framework that is used for developing application software that can be run on various software and hardware platforms with little or no change in the underlying codebase, while still being a native application with native capabilities and speed.

Go (often referred to as golang) is a free and open source programming language created at Google.

This binding is a thin layer on top of Qt's C++ API (with a one-to-one mapping) and allows you to write Qt applications entirely in Go, it comes along with some tools to make working with it more convenient.

Beside the main effort to ease the development of application software by making Qt's API accessible from Go, the second biggest effort went into simplifying the development and deployment processes.

Screenshots

Status

WIP

Most of Qt's API is accessible from Go.

It should already contain everything you need to build fully featured applications.

If you still miss something, please open an issue.

Also there have been no release so far, so please pin the repo to a specific commit that is known to work for you.

Targets

The following targets are currently supported:

Target	Arch	Linkage	Docker Deployment	Host OS
Windows	(32 / 64)	(dynamic / static / system libs)	Yes	Any
Android (+Wear)	arm	dynamic	Yes	Any
Android-Emulator (+Wear)	32	dynamic	No	Windows/macOS/Linux
Linux	64	(dynamic / system libs)	Yes	Any
Raspberry Pi (1/2/3)	arm	(dynamic / system libs)	Yes	Any
macOS	64	(dynamic / system libs)	No	macOS
iOS	(arm + arm64)	static	No	macOS
iOS-Simulator	(32 + 64)	static	No	macOS
SailfishOS	arm	system libs	No	Windows/macOS/Linux
SailfishOS-Emulator	32	system libs	No	Windows/macOS/Linux
AsteroidOS	arm	system libs	No	Linux

FAQ

What are the system requirements?
- 2.5gb free ram (only needed during the setup) and at least 5gb free disk space.
How long does it take to get started?
- It takes 15-30 min to download and install everything.
Why is the setup so slow?
- The setup spends most of it's time installing the packages to speed up the compilation of your applications later.
Can I make the setup faster or lower the system requirements?
- Yes, you can export QT_STUB=true prior running the setup, and thereby also lower the system requirements.
Why is qtdeploy so slow?
- qtdeploy is slow, because it is intended to be used for deploying and therefore takes some extra actions that may not be needed during development.
Can I make qtdeploy faster?
- Yes, you can use the -fast flag to skip most of the actions taken otherwise and so drastically reduce the time it takes to compile your application.

Docker

The easiest way to get started is to use the pre-built docker images.

Tag	Compressed Size
linux	1 GB
android	3 GB
windows_32_shared	1 GB
windows_32_static	2 GB
windows_64_shared	1 GB
windows_64_static	2 GB
rpi1	2 GB
rpi2	2 GB
rpi3	2 GB

(If you want to switch between the 32/64-bit and the dynamic/static linkage for the windows target, you can use the QT_MXE_ARCH and QT_MXE_STATIC environmental variables like you would do if install MXE directly on your machine)

You can download an image by running: docker pull therecipe/qt:TAG

These images contain Go, Qt and all dependencies that may be necessary to deploy to your target.

You can look into the Dockerfiles that are used to create these images here.

The images can be used for the following:

The minimal setup to make it easier to get started.
The docker deployment to various targets during development or for CI or CD with qtdeploy -docker build ...
To provide pre-built (disposable) environments for CI or CD.
To provide template images to build upon for CI or CD.

Installation

If you want to build applications for macOS or iOS, then you need to take the regular setup on macOS.

Minimal Setup

Install Go: https://golang.org/dl
Install Docker: https://store.docker.com/search?type=edition&offering=community
Pull the linux image: docker pull therecipe/qt:linux
Share your GOPATH with docker if needed (for example on macOS)
Clone the repo: go get -v github.com/therecipe/qt/cmd/...
Run the docker setup: $GOPATH/bin/qtsetup -docker
Pull additional images if you want to deploy to another target then linux
Read the usage instructions and build the example

Regular Setup

Please make the environmental variables persistent if you override them.

You can do this by either editing you $HOME/.bash_profile or $HOME/.profile on macOS or Linux.

On Windows you can simply use the advanced system settings.

These are some general environmental variables, you can find the target specific environmental variables here.

Variable	Default	Type	Note
QT_VERSION	5.8.0	string	can also be set by using the `-qt_version` flag
QT_DIR	$HOME/Qt5.8.0 or C:\Qt\Qt5.8.0	string	can also be set by using the `-qt_dir` flag
QT_STUB	false	bool	is set to `true` during the minimal setup
QT_DEBUG	false	bool	set to `true` if you want to print function names at runtime
QT_QMAKE_DIR		string	can be used to make use of custom versions of Qt

Desktop

Windows

Official (with Android support)

Install Go: https://golang.org/doc/install?download=go1.8.1.windows-amd64.msi
Clone the repo: go get -u -v github.com/therecipe/qt/cmd/...
Install Qt; you can also define a custom location with QT_DIR
- without Android support: https://download.qt.io/official_releases/qt/5.8/5.8.0/qt-opensource-windows-x86-mingw530-5.8.0.exe
- with Android support: https://download.qt.io/official_releases/qt/5.8/5.8.0/qt-opensource-windows-x86-android-5.8.0.exe
Add the directory that contains gcc to your PATH: C:\Qt\Qt5.8.0\Tools\mingw530_32\bin (or similar)
Run the setup: %GOPATH%\bin\qtsetup
Read the usage instructions and build the example

MSYS2

Install Go: https://golang.org/doc/install?download=go1.8.1.windows-amd64.msi
Clone the repo: go get -u -v github.com/therecipe/qt/cmd/...
Install MSYS2 and export QT_MSYS2=true
Open a MinGW shell (the 64 bit version, if you want to deploy 64 bit applications)
pacman -Syyu
Install Qt
- to deploy dynamically linked 32-bit applications: pacman -S mingw-w64-i686-qt-creator mingw-w64-i686-qt5
- to deploy dynamically linked 64-bit applications: pacman -S mingw-w64-x86_64-qt-creator mingw-w64-x86_64-qt5
- to deploy statically linked 32-bit applications: pacman -S mingw-w64-i686-qt-creator mingw-w64-i686-qt5-static
- to deploy statically linked 64-bit applications: pacman -S mingw-w64-x86_64-qt-creator mingw-w64-x86_64-qt5-static
pacman -Scc
Use the MinGW shell for the setup and deployments (the 64 bit version, if you want to deploy 64 bit applications)
Export QT_MSYS2_STATIC=true if you want to deploy statically linked applications.
Run the setup: %GOPATH%\bin\qtsetup
Read the usage instructions and build the example

macOS

Official (with iOS/Android support)

Install Go: https://golang.org/doc/install?download=go1.8.1.darwin-amd64.pkg
Install Xcode
Clone the repo: go get -u -v github.com/therecipe/qt/cmd/...
Install Qt; you can also define a custom location with QT_DIR
- without Android or iOS support: https://download.qt.io/official_releases/qt/5.8/5.8.0/qt-opensource-mac-x64-clang-5.8.0.dmg
- with Android support: https://download.qt.io/official_releases/qt/5.8/5.8.0/qt-opensource-mac-x64-android-5.8.0.dmg
- with Android and iOS support: https://download.qt.io/official_releases/qt/5.8/5.8.0/qt-opensource-mac-x64-android-ios-5.8.0.dmg
Run the setup: $GOPATH/bin/qtsetup
Read the usage instructions and build the example

HomeBrew (no deployments possible)

Install Go: https://golang.org/doc/install?download=go1.8.1.darwin-amd64.pkg
Install Xcode
Clone the repo: go get -u -v github.com/therecipe/qt/cmd/...
Install HomeBrew and export QT_HOMEBREW=true
Install Qt: brew install qt5
Run the setup: $GOPATH/bin/qtsetup
Read the usage instructions and build the example

Linux

Official (with Android support)

Install Go: https://golang.org/doc/install?download=go1.8.1.linux-amd64.tar.gz
Clone the repo: go get -u -v github.com/therecipe/qt/cmd/...
Install Qt; you can also define a custom location with QT_DIR
- without Android support: https://download.qt.io/official_releases/qt/5.8/5.8.0/qt-opensource-linux-x64-5.8.0.run
- with Android support: https://download.qt.io/official_releases/qt/5.8/5.8.0/qt-opensource-linux-x64-android-5.8.0.run
Install g++ >= 5 and OpenGL dependencies
- Debian/Ubuntu (apt-get)
  - sudo apt-get -y install build-essential libgl1-mesa-dev libpulse-dev
- Fedora/RHEL/CentOS (yum)
  - sudo yum -y groupinstall "C Development Tools and Libraries"
  - sudo yum -y install mesa-libGL-devel
- openSUSE (zypper)
  - sudo zypper -n install -t pattern devel_basis
Run the setup: $GOPATH/bin/qtsetup
Read the usage instructions and build the example (use the *.sh script to start your application)

Pkg-Config (no deployments possible)

Install Go: https://golang.org/doc/install?download=go1.8.1.linux-amd64.tar.gz
Clone the repo: go get -u -v github.com/therecipe/qt/cmd/...
Install the Qt-dev package with the help of your systems package manager
Export QT_PKG_CONFIG=true
Install g++ >= 5 and OpenGL dependencies
- Debian/Ubuntu (apt-get)
  - sudo apt-get -y install build-essential libgl1-mesa-dev libpulse-dev
- Fedora/RHEL/CentOS (yum)
  - sudo yum -y groupinstall "C Development Tools and Libraries"
  - sudo yum -y install mesa-libGL-devel
- openSUSE (zypper)
  - sudo zypper -n install -t pattern devel_basis
Run the setup: $GOPATH/bin/qtsetup
Read the usage instructions and build the example (use the *.sh script to start your application)

Cross compile to Windows on Debian/Ubuntu

Install Wine: sudo apt-get -y install wine
Install MXE
- echo "deb https://pkg.mxe.cc/repos/apt/debian jessie main" | sudo tee --append /etc/apt/sources.list.d/mxeapt.list > /dev/null
- sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys D43A795B73B16ABE9643FE1AFD8FFF16DB45C6AB
- sudo apt-get update
Install Qt
- to deploy dynamically linked 32-bit applications sudo apt-get -y -qq install mxe-i686-w64-mingw32.shared-qt3d mxe-i686-w64-mingw32.shared-qtactiveqt mxe-i686-w64-mingw32.shared-qtbase mxe-i686-w64-mingw32.shared-qtcanvas3d mxe-i686-w64-mingw32.shared-qtcharts mxe-i686-w64-mingw32.shared-qtconnectivity mxe-i686-w64-mingw32.shared-qtdatavis3d mxe-i686-w64-mingw32.shared-qtdeclarative mxe-i686-w64-mingw32.shared-qtgamepad mxe-i686-w64-mingw32.shared-qtgraphicaleffects mxe-i686-w64-mingw32.shared-qtimageformats mxe-i686-w64-mingw32.shared-qtlocation mxe-i686-w64-mingw32.shared-qtmultimedia mxe-i686-w64-mingw32.shared-qtofficeopenxml mxe-i686-w64-mingw32.shared-qtpurchasing mxe-i686-w64-mingw32.shared-qtquickcontrols mxe-i686-w64-mingw32.shared-qtquickcontrols2 mxe-i686-w64-mingw32.shared-qtscript mxe-i686-w64-mingw32.shared-qtscxml mxe-i686-w64-mingw32.shared-qtsensors mxe-i686-w64-mingw32.shared-qtserialbus mxe-i686-w64-mingw32.shared-qtserialport mxe-i686-w64-mingw32.shared-qtservice mxe-i686-w64-mingw32.shared-qtsvg mxe-i686-w64-mingw32.shared-qtsystems mxe-i686-w64-mingw32.shared-qttools mxe-i686-w64-mingw32.shared-qttranslations mxe-i686-w64-mingw32.shared-qtvirtualkeyboard mxe-i686-w64-mingw32.shared-qtwebchannel mxe-i686-w64-mingw32.shared-qtwebkit mxe-i686-w64-mingw32.shared-qtwebsockets mxe-i686-w64-mingw32.shared-qtwinextras mxe-i686-w64-mingw32.shared-qtxlsxwriter mxe-i686-w64-mingw32.shared-qtxmlpatterns
- to deploy dynamically linked 64-bit applications sudo apt-get -y -qq install mxe-x86-64-w64-mingw32.shared-qt3d mxe-x86-64-w64-mingw32.shared-qtactiveqt mxe-x86-64-w64-mingw32.shared-qtbase mxe-x86-64-w64-mingw32.shared-qtcanvas3d mxe-x86-64-w64-mingw32.shared-qtcharts mxe-x86-64-w64-mingw32.shared-qtconnectivity mxe-x86-64-w64-mingw32.shared-qtdatavis3d mxe-x86-64-w64-mingw32.shared-qtdeclarative mxe-x86-64-w64-mingw32.shared-qtgamepad mxe-x86-64-w64-mingw32.shared-qtgraphicaleffects mxe-x86-64-w64-mingw32.shared-qtimageformats mxe-x86-64-w64-mingw32.shared-qtlocation mxe-x86-64-w64-mingw32.shared-qtmultimedia mxe-x86-64-w64-mingw32.shared-qtofficeopenxml mxe-x86-64-w64-mingw32.shared-qtpurchasing mxe-x86-64-w64-mingw32.shared-qtquickcontrols mxe-x86-64-w64-mingw32.shared-qtquickcontrols2 mxe-x86-64-w64-mingw32.shared-qtscript mxe-x86-64-w64-mingw32.shared-qtscxml mxe-x86-64-w64-mingw32.shared-qtsensors mxe-x86-64-w64-mingw32.shared-qtserialbus mxe-x86-64-w64-mingw32.shared-qtserialport mxe-x86-64-w64-mingw32.shared-qtservice mxe-x86-64-w64-mingw32.shared-qtsvg mxe-x86-64-w64-mingw32.shared-qtsystems mxe-x86-64-w64-mingw32.shared-qttools mxe-x86-64-w64-mingw32.shared-qttranslations mxe-x86-64-w64-mingw32.shared-qtvirtualkeyboard mxe-x86-64-w64-mingw32.shared-qtwebchannel mxe-x86-64-w64-mingw32.shared-qtwebkit mxe-x86-64-w64-mingw32.shared-qtwebsockets mxe-x86-64-w64-mingw32.shared-qtwinextras mxe-x86-64-w64-mingw32.shared-qtxlsxwriter mxe-x86-64-w64-mingw32.shared-qtxmlpatterns
- to deploy statically linked 32-bit applications sudo apt-get -y -qq install mxe-i686-w64-mingw32.static-qt3d mxe-i686-w64-mingw32.static-qtactiveqt mxe-i686-w64-mingw32.static-qtbase mxe-i686-w64-mingw32.static-qtcanvas3d mxe-i686-w64-mingw32.static-qtcharts mxe-i686-w64-mingw32.static-qtconnectivity mxe-i686-w64-mingw32.static-qtdatavis3d mxe-i686-w64-mingw32.static-qtdeclarative mxe-i686-w64-mingw32.static-qtgamepad mxe-i686-w64-mingw32.static-qtgraphicaleffects mxe-i686-w64-mingw32.static-qtimageformats mxe-i686-w64-mingw32.static-qtlocation mxe-i686-w64-mingw32.static-qtmultimedia mxe-i686-w64-mingw32.static-qtofficeopenxml mxe-i686-w64-mingw32.static-qtpurchasing mxe-i686-w64-mingw32.static-qtquickcontrols mxe-i686-w64-mingw32.static-qtquickcontrols2 mxe-i686-w64-mingw32.static-qtscript mxe-i686-w64-mingw32.static-qtscxml mxe-i686-w64-mingw32.static-qtsensors mxe-i686-w64-mingw32.static-qtserialbus mxe-i686-w64-mingw32.static-qtserialport mxe-i686-w64-mingw32.static-qtservice mxe-i686-w64-mingw32.static-qtsvg mxe-i686-w64-mingw32.static-qtsystems mxe-i686-w64-mingw32.static-qttools mxe-i686-w64-mingw32.static-qttranslations mxe-i686-w64-mingw32.static-qtvirtualkeyboard mxe-i686-w64-mingw32.static-qtwebchannel mxe-i686-w64-mingw32.static-qtwebsockets mxe-i686-w64-mingw32.static-qtwinextras mxe-i686-w64-mingw32.static-qtxlsxwriter mxe-i686-w64-mingw32.static-qtxmlpatterns
- to deploy statically linked 64-bit applications sudo apt-get -y -qq install mxe-x86-64-w64-mingw32.static-qt3d mxe-x86-64-w64-mingw32.static-qtactiveqt mxe-x86-64-w64-mingw32.static-qtbase mxe-x86-64-w64-mingw32.static-qtcanvas3d mxe-x86-64-w64-mingw32.static-qtcharts mxe-x86-64-w64-mingw32.static-qtconnectivity mxe-x86-64-w64-mingw32.static-qtdatavis3d mxe-x86-64-w64-mingw32.static-qtdeclarative mxe-x86-64-w64-mingw32.static-qtgamepad mxe-x86-64-w64-mingw32.static-qtgraphicaleffects mxe-x86-64-w64-mingw32.static-qtimageformats mxe-x86-64-w64-mingw32.static-qtlocation mxe-x86-64-w64-mingw32.static-qtmultimedia mxe-x86-64-w64-mingw32.static-qtofficeopenxml mxe-x86-64-w64-mingw32.static-qtpurchasing mxe-x86-64-w64-mingw32.static-qtquickcontrols mxe-x86-64-w64-mingw32.static-qtquickcontrols2 mxe-x86-64-w64-mingw32.static-qtscript mxe-x86-64-w64-mingw32.static-qtscxml mxe-x86-64-w64-mingw32.static-qtsensors mxe-x86-64-w64-mingw32.static-qtserialbus mxe-x86-64-w64-mingw32.static-qtserialport mxe-x86-64-w64-mingw32.static-qtservice mxe-x86-64-w64-mingw32.static-qtsvg mxe-x86-64-w64-mingw32.static-qtsystems mxe-x86-64-w64-mingw32.static-qttools mxe-x86-64-w64-mingw32.static-qttranslations mxe-x86-64-w64-mingw32.static-qtvirtualkeyboard mxe-x86-64-w64-mingw32.static-qtwebchannel mxe-x86-64-w64-mingw32.static-qtwebsockets mxe-x86-64-w64-mingw32.static-qtwinextras mxe-x86-64-w64-mingw32.static-qtxlsxwriter mxe-x86-64-w64-mingw32.static-qtxmlpatterns
Export QT_MXE_ARCH=386 to deploy 32-bit applications or QT_MXE_ARCH=amd64 to deploy 64-bit applications.
Export QT_MXE_STATIC=true to deploy statically linked applications.
Run the setup: $GOPATH/bin/qtsetup
Read the usage instructions and build the example (use the *.sh script to start your application)

Mobile

Android / Android-Emulator

Install the desktop version for Windows, macOS or Linux
Unzip the Android SDK in C:\android-sdk-windows\ or $HOME/android-sdk-macosx/ or $HOME/android-sdk-linux/; you can also define a custom location with ANDROID_SDK_DIR
Install the SDK dependencies with C:\android-sdk-windows\tools\android.bat or $HOME/android-sdk-{macosx|linux }/tools/android
- Tools
  - Android SDK Build-tools (25.0.3)
- Android 7.1.1 (API 25)
  - SDK Platform
- Extras (Windows only)
  - Google USB Driver
Unzip the Android NDK in C:\ or $HOME; you can also define a custom location with ANDROID_NDK_DIR
Install the JDK >= 8 (Linux: install in $HOME/jdk/); you can also define a custom location with JDK_DIR
- https://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html
Run the setup: %GOPATH%\bin\qtsetup full android or $GOPATH/bin/qtsetup full android
Read the usage instructions and build the example

iOS

Install the desktop version for macOS
Run the setup: $GOPATH/bin/qtsetup full ios && $GOPATH/bin/qtsetup full ios-simulator
Read the usage instructions and build the example

SailfishOS

Install the desktop version for Windows, macOS or Linux (Qt <= 5.7.x required)
Install VirtualBox; you can also define a custom location with VIRTUALBOX_DIR
Install the SailfishOS SDK; you can also define a custom location with SAILFISH_DIR
Run the setup:
- %GOPATH%\bin\qtsetup full sailfish && %GOPATH%\bin\qtsetup full sailfish-emulator
- $GOPATH/bin/qtsetup full sailfish && $GOPATH/bin/qtsetup full sailfish-emulator
Read the usage instructions and build the example

AsteroidOS

TBA

Embedded

Raspberry Pi

Raspbian + pre-built Qt 5.7

Install the desktop version for Linux
Install Raspbian on your rpi: https://downloads.raspberrypi.org/raspbian/images/raspbian-2017-03-03/2017-03-02-raspbian-jessie.zip
Follow the instructions: https://www.qtrpi.com/faq#howtoinstall
export QT_QMAKE_DIR=/opt/qtrpi/raspi/qt5/bin
export RPI_TOOLS_DIR=/opt/qtrpi/raspi/tools
export RPI_COMPILER=gcc-linaro-arm-linux-gnueabihf-raspbian-x64
Run the setup: $GOPATH/bin/qtsetup full rpiX (replace X with: 1, 2 or 3)
Read the usage instructions and build the example (use the *.sh script to start your application)

Arch Linux + self-compiled Qt 5.8

Install the desktop version for Linux
mkdir $HOME/raspi
Download and unpack the Qt source
- cd $HOME/raspi && wget https://download.qt.io/official_releases/qt/5.8/5.8.0/single/qt-everywhere-opensource-src-5.8.0.tar.gz
- tar -xzf qt-everywhere-opensource-src-5.8.0.tar.gz qt-everywhere-opensource-src-5.8.0
Download the cross compiler; you can also define a custom location with RPI_TOOLS_DIR (but then you might need to manually change commands from here on during the setup)
- cd $HOME/raspi && git clone --depth 1 https://github.com/raspberrypi/tools.git
Get dependencies and install Arch Linux on your SD card
- sudo apt-get -y install bsdtar libwayland-dev flex bison gperf python
- Raspberry Pi 1: https://archlinuxarm.org/platforms/armv6/raspberry-pi
- Raspberry Pi 2: https://archlinuxarm.org/platforms/armv7/broadcom/raspberry-pi-2
- Raspberry Pi 3: https://archlinuxarm.org/platforms/armv8/broadcom/raspberry-pi-3
Start your Raspberry Pi
Enable root login over ssh
- export RASPI_IP=192.168.XXX.XXX (replace XXX.XXX with the valid ip ending)
- ssh alarm@$RASPI_IP (password: alarm)
- su (password: root)
- sed -i 's/#PermitRootLogin/PermitRootLogin/' /etc/ssh/sshd_config && sed -i 's/prohibit-password/yes/' /etc/ssh/sshd_config && systemctl restart sshd.service
Update and install dependencies (5 min)
- pacman -Syyu
- pacman -S fontconfig icu libinput libjpeg-turbo libproxy libsm libxi libxkbcommon-x11 libxrender tslib xcb-util-image xcb-util-keysyms xcb-util-wm freetds gtk3 libfbclient libmariadbclient mtdev postgresql-libs unixodbc assimp bluez-libs sdl2 jasper libmng libwebp gst-plugins-base-libs libpulse openal gst-plugins-bad hunspell libxcomposite wayland gst-plugins-base libxslt gst-plugins-good ffmpeg jsoncpp libevent libsrtp libvpx libxcursor libxrandr libxss libxtst nss opus protobuf snappy xcb-util xcb-util-cursor xcb-util-renderutil xcb-util-xrm libxfixes libxshmfence libxext libx11 libxcb libice weston ttf-freefont lxde gamin xorg-server xorg-xinit xorg-server-utils mesa xf86-video-fbdev xf86-video-vesa xorg-server-xwayland xf86-input-libinput gst-plugins-ugly sqlite2 cups xorg-server-devel rsync
- pacman -Scc
- Raspberry Pi 1
  - sed -i 's/gpu_mem=64/gpu_mem=128/' /boot/config.txt
  - echo "exec startlxde" >> $HOME/.xinitrc && mkdir $HOME/.config/ && echo -e "[core]\nbackend=fbdev-backend.so\nmodules=xwayland.so" >> $HOME/.config/weston.ini
  experimental: enable OpenGL under X; will break most applications
  - echo "dtoverlay=vc4-kms-v3d,cma-128" >> /boot/config.txt && sed -i 's/fbdev-backend/drm-backend/' $HOME/.config/weston.ini
- Raspberry Pi 2 or 3
  - sed -i 's/gpu_mem=64/gpu_mem=256/' /boot/config.txt
  - echo "exec startlxde" >> $HOME/.xinitrc && mkdir $HOME/.config/ && echo -e "[core]\nbackend=fbdev-backend.so\nmodules=xwayland.so" >> $HOME/.config/weston.ini
  experimental: enable OpenGL under X; will break most applications
  - echo "dtoverlay=vc4-kms-v3d,cma-256" >> /boot/config.txt && sed -i 's/fbdev-backend/drm-backend/' $HOME/.config/weston.ini
- reboot
Get sysroot for cross compiling (password: root) (5 min)
- cd $HOME/raspi && mkdir sysroot sysroot/usr sysroot/opt
- rsync -avz root@$RASPI_IP:/lib sysroot --delete
- rsync -avz root@$RASPI_IP:/usr/include sysroot/usr --delete
- rsync -avz root@$RASPI_IP:/usr/lib sysroot/usr --delete
- rsync -avz root@$RASPI_IP:/opt/vc sysroot/opt --delete
Prepare sysroot; you can also define a custom location with RPI1_SYSROOT_DIR, RPI2_SYSROOT_DIR or RPI3_SYSROOT_DIR (but then you might need to manually change commands from here on during the setup)
- cd $HOME/raspi && wget https://raw.githubusercontent.com/riscv/riscv-poky/master/scripts/sysroot-relativelinks.py
- chmod +x sysroot-relativelinks.py && ./sysroot-relativelinks.py sysroot
Build Qt (2 hours)
- cd $HOME/raspi/qt-everywhere-opensource-src-5.8.0
- make sure QT_DIR points to your desktop installation of Qt; you may also want to tweak the configure command below, if you put the tools or the sysroot in an alternative location
- Raspberry Pi 1
  - ./configure -opengl es2 -device linux-rasp-pi-g++ -device-option CROSS_COMPILE=$HOME/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf- -sysroot $HOME/raspi/sysroot -opensource -confirm-license -make libs -skip webengine -nomake tools -nomake examples -extprefix $QT_DIR/5.8/rpi1 -I $HOME/raspi/sysroot/opt/vc/include -I $HOME/raspi/sysroot/opt/vc/include/interface/vcos -I $HOME/raspi/sysroot/opt/vc/include/interface/vcos/pthreads -I $HOME/raspi/sysroot/opt/vc/include/interface/vmcs_host/linux -silent
- Raspberry Pi 2
  - ./configure -opengl es2 -device linux-rasp-pi2-g++ -device-option CROSS_COMPILE=$HOME/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf- -sysroot $HOME/raspi/sysroot -opensource -confirm-license -make libs -skip webengine -nomake tools -nomake examples -extprefix $QT_DIR/5.8/rpi2 -I $HOME/raspi/sysroot/opt/vc/include -I $HOME/raspi/sysroot/opt/vc/include/interface/vcos -I $HOME/raspi/sysroot/opt/vc/include/interface/vcos/pthreads -I $HOME/raspi/sysroot/opt/vc/include/interface/vmcs_host/linux -silent
- Raspberry Pi 3
  - ./configure -opengl es2 -device linux-rpi3-g++ -device-option CROSS_COMPILE=$HOME/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf- -sysroot $HOME/raspi/sysroot -opensource -confirm-license -make libs -skip webengine -nomake tools -nomake examples -extprefix $QT_DIR/5.8/rpi3 -I $HOME/raspi/sysroot/opt/vc/include -I $HOME/raspi/sysroot/opt/vc/include/interface/vcos -I $HOME/raspi/sysroot/opt/vc/include/interface/vcos/pthreads -I $HOME/raspi/sysroot/opt/vc/include/interface/vmcs_host/linux -silent
- make -k -i && sudo make -k -i install
Prepare the Qt directory: sudo chown -R $USER $QT_DIR
Run the setup: $GOPATH/bin/qtsetup full rpiX (replace X with: 1, 2 or 3)
Read the usage instructions and build the example (use the *.sh script to start your application)
Notes:
- run startx & before starting an application with -platform xcb
- run weston & or weston --tty=1 & (via ssh) or create your own compositor before starting an application with -platform wayland-egl
- you can increase the available gpu memory by editing /boot/config.txt

Additional Modules

WebKit

Download the WebKit module:
Extract it inside QT_DIR/5.8/{mingw53_32|clang_64|gcc_64}
Export QT_WEBKIT=true
Run the setup

Target Specific Infos And Settings

Desktop

Windows

General

You may need to export CGO_ENABLED=1 and GOARCH=386 if you want to use go build on windows.

Depending on your editor or IDE you may also need to export GOARCH=386 to make the code completion work.

It's recommended to use qtdeploy -fast build path/to/your/project instead of the direct usage of go build.

Environmental Variables

Windows Host

Variable	Default	Type	Note
QT_MSYS2	false	bool	set to `true` if you want to use the msys2 version of Qt
QT_MSYS2_DIR	C:\msys32 or C:\msys64	string	`qtsetup check` will display this with the prefix detected by QT_MSYS2_ARCH
QT_MSYS2_ARCH	386	string	set to `amd64` if you want to deploy 64 bit applications
QT_MSYS2_STATIC	false	bool	set to `true` if you want to deploy statically linked applications

QT_MSYS2 and QT_MSYS2_ARCH may be removed as they are now automatically detected if you use the mingw shells
QT_MSYS2_DIR may be refined to display only the current value (without the arch dir)

Linux or macOS Host

Variable	Default	Type	Note
QT_MXE_DIR	/usr/lib/mxe	string	can be set to use mxe from an alternative location
QT_MXE_ARCH	386	string	set to `amd64` if you want to deploy 64 bit applications
QT_MXE_STATIC	false	bool	set to `true` if you want to deploy statically linked applications

Branding

You can use the windows folder at the root of your project to let qtdeploy automatically bundle your assets.

If you want to use a custom icon for your binary, you may need to use windres.

To do so, create a file called icon.rc with the following content in your root project folder.

IDI_ICON1 ICON DISCARDABLE "icon.ico"

Rename your icon to icon.ico and place it alongside the icon.rc

Run windres like this: path/to/windres path/to/project/icon.rc -o path/to/project/icon_windows.syso

windres can be usually found inside the same folder as rcc on a windows system (for example: Qt5.8.0/5.8/mingw53_32/bin/windres.exe)

Use qtdeploy or go build as usuall, the *.syso file should be automatically detected and be added to your binary.

You can find more infos here: https://doc.qt.io/qt-5/appicon.html

macOS

Environmental Variables

Variable	Default	Type	Note
QT_HOMEBREW	false	bool	set to `true` if you want to use the homebrew version of Qt
XCODE_DIR	/Applications/Xcode.app	string	can be set to use Xcode from an alternative location

Branding

You can use the darwin folder at the root of your project to let qtdeploy automatically bundle your assets.

project_name
├── darwin
│   └── Contents
│       ├── Info.plist
│       └── Resources
│           └── project_name.icns
├── project.go
└── qml
    └── project.qml

Furthermore you can use the Info.plist found inside deploy/darwin/project_name.app as a template to build upon.

Linux

Environmental Variables

Variable	Default	Type	Note
QT_DISTRO	arch/fedora/suse/ubuntu/gentoo	string	set this to another distro if you want to change the values for DOC and MISC dir
QT_PKG_CONFIG	false	bool	set this to `true` if you want to use the Qt version of your systems package manger
QT_DOC_DIR	"depends on the distro"	string	set this to the documentation (*.index) folder location
QT_MISC_DIR	"depends on the distro"	string

Branding

You can use the linux folder at the root of your project to let qtdeploy automatically bundle your assets.

Mobile

Android / Android-Emulator

Environmental Variables

Variable	Default	Type	Note
JDK_DIR	JAVA_HOME	string	can be also set by setting JAVA_HOME
ANDROID_SDK_DIR	$HOME/android-sdk-linux or $HOME/android-sdk-macosx or C:\android-sdk-windows	string	can be also set by setting ANDROID_SDK_ROOT
ANDROID_NDK_DIR	$HOME/android-ndk-r14b or C:\android-ndk-r14b	string	can be also set by setting ANDROID_NDK_ROOT

Branding

You can use the android or android-emulator folder at the root of your project to let qtdeploy automatically bundle your assets.

project_name
├── android
│   ├── AndroidManifest.xml
│   ├── alias.txt
│   ├── build.gradle
│   ├── gradle
│   │   └── wrapper
│   │       └── gradle-wrapper.properties
│   ├── icon.png
│   ├── password.txt
│   ├── project_name.keystore
│   └── res
│       ├── drawable-hdpi
│       │   └── icon.png
│       ├── drawable-ldpi
│       │   └── icon.png
│       └── drawable-mdpi
│           └── icon.png
├── deploy
│   └── android
│       └── build
├── project.go
└── qml
    └── project.qml

The content of the android or android-emulator folder will be copied prior gradle is used to create an *.apk.

Furthermore you can use the AndroidManifest.xml found inside deploy/android/build as a template to build upon.

This can be useful if you want to change the package identifier, the icon or add more permissions.

You could for example add an android:icon="@drawable/icon" attribute to application in AndroidManifest.xml to set replace the default icon with your own.

If you want to have your *.apk signed automatically, then you need to create an alias.txt, password.txt and an project_name.keystore inside the android folder.

Or you could sign it manually as well.

Java Native Interface (JNI)

You can call Java functions directly from Go with the help of the androidextras package.

Callbacks into Go code from Java are also possible (with some manual labor).

Take a look at the examples to see how it works.

Android Wear

To get your app working on Android Wear, you just need to add android:theme="@android:style/Theme.DeviceDefault" to the application node of your custom AndroidManifest.xml before running qtdeploy.

You can find a working example here.

iOS

Branding

You can use the ios or ios-simulator folder at the root of your project to let qtdeploy automatically bundle your assets.

Furthermore you can sign your app with the help of Xcode.

SailfishOS

Environmental Variables

Variable	Default	Type	Note
VIRTUALBOX_DIR	"depends on the host os"	string	set this to override the default path to the `vboxmanage` binary
SAILFISH_DIR	$HOME/SailfishOS or C:\SailfishOS	string	set this to override the default path to the root dir of your sailfish installation

Branding

You can use the sailfish or sailfish-emulator folder at the root of your project to let qtdeploy automatically bundle your assets.

project_name
├── project.go
├── qml
│   └── project.qml
└── sailfish
    ├── harbour-project_name.png
    ├── project_name.desktop
    └── project_name.spec

Furthermore you can use the *.desktop and *.spec files found inside deploy/sailfish as a template to build upon.

AsteroidOS

TBA

Embedded

Raspberry Pi

Environmental Variables

Variable	Default	Type	Note
RPI_TOOLS_DIR	$HOME/raspi/tools	string	set this to override the default path to the raspi tools repo
RPI_COMPILER	arm-rpi-4.9.3-linux-gnueabihf	string	`gcc-linaro-arm-linux-gnueabihf-raspbian-x64` is used for the docker images

Branding

You can use the rpiX folders at the root of your project to let qtdeploy automatically bundle your assets.

Tools

The tools can be found either in $GOPATH/bin or $GOBIN and are symlinked into your PATH during the setup.

If you ran the minimal setup and/or depend on the docker images for the specific target, then you need to use the -docker flag when you use them.

qtsetup

The use of qtsetup is rarely necessary after you are done with the inital setup.

But you can use it to dump some environmental infos by running: qtsetup check [TARGET]

And it can be used to update the tools by running: qtsetup update

Or be used to upgrade the whole repo by running: qtsetup upgrade (you will need to re-run the setup after this)

Run qtsetup -help for more infos.

qtdeploy

qtdeploy is used to deploy your applications.

You can compile and deploy to your desktop target by running: qtdeploy build desktop [path/to/your/project]

(it's possible to obtain the path, if you are currently inside the project folder)

The other valid targets are:

Target
windows
darwin
linux
android
android-emulator
ios
ios-simulator
sailfish
sailfish-emulator
rpi1
rpi2
rpi3
asteroid

So for example running:

qtdeploy build android [path/to/your/project]

will deploy your project for the android target.

and running:

qtdeploy -docker build android [path/to/your/project]

will use the docker image for it.

You can speedup the compilation by using the -fast flag. (only for the desktop target)

qtdeploy will also call qtrcc, qtmoc and qtminimal for you.

There will be various files created during the compilation, it's recommended to not manually edit or remove them.

Run qtdeploy -help for more infos.

qtrcc

qtrcc is a wrapper around Qt's rcc and can be used to bundle resources with your code.

You can use it to bundle resources for the desktop target like this: qtrcc desktop path/to/your/project

(it's possible to obtain the path, if you are currently inside the project folder)

qtrcc will then automatically bundle all resources from the qml sub-folder (path/to/your/project/qml).

If you want to re-use your current .qrc file(s) instead, or simply want to have more control about your resouces, then you can place your .qrc file(s) inside the root folder.

Or if you need even more control, then you can just use rcc directly as well, but make sure to obtain one of these rcc_cgo_*.go files to place them alongside with your rcc generated .cpp file.

Invoking qtrcc will generate at least 3 different files, it's recommended to not manually edit or remove them.

Futhermore qtquickcontrols2.conf files are automatically detected inside the root folder and bundled as well.

You can edit the *.qrc files by hand, or with the help of the Qt Creator.

Run qtrcc -help for more infos.

qtmoc

qtmoc is a wrapper around Qt's moc and can be used to create sub-classes of Qt classes and to extend them with your own constructors, signals, slots and properties.

It's recommended that you get yourself familiar with Qt's signal and slot mechanism first: https://doc.qt.io/qt-5/signalsandslots.html

You can use qtmoc like this: qtmoc desktop path/to/your/project or qtmoc desktop path/to/your/sub-package

(it's possible to obtain the path, if you are currently inside the project or sub-package folder)

For this to work you need to create a moc struct first:

package main

import "github.com/therecipe/qt/core"

//this struct will let qtmoc generate the necessary Go and C++ code.
//such as the NewExampleStruct and DestroyExampleStruct functions
type exampleStruct struct {

	//let qtmoc know what class you want to sub-class
	//this can be any class that is derived from QObject
	//and could also be one of your own moc classes
	//it's important that you anonymously embed the type as a value here
	//qtmoc will ignore this struct otherwise
	core.QObject

	//this will let qtmoc know that you want to have the "init" function called
	//when you call NewExampleStruct
	_ func() `constructor:"init"`

	//this will let qtmoc know that you want a signal called "firstSignal"
	//so that the related Connect* Disconnect* functions can be created
	_ func() `signal:"firstSignal"`

	//the signal can also have parameters, but no return parameter
	//return parameters are only possible if you create a slot
	_ func(bool, int, string, []string, map[string]string) `signal:"secondSignal"`

	//you can also let the signal accept a single *core.QObject an array or a map
	_ func(*core.QObject, []*core.QObject, map[string]*core.QObject) `signal:"thirdSignal"`

	//as a special addition to the supported Go primitives, you can also use Go errors in signals/slots/properties
	_ func(error) `signals:"fourthSignal"`

	//this will let qtmoc know that you want a slot called "firstSlot"
	_ func() `slot:"firstSlot"`

	//a slot can be created in the same way as a signal, but it can additionally return a single argument
	_ func(string) string               `slot:"secondSlot"`
	_ func(*core.QObject) *core.QObject `slot:"thirdSlot"`
	_ func() error                      `slot:"fourthSlot"`

	//this will let qtmoc know that you want a property called "firstProperty"
	//there will be helper getter + setter functions and a changed signal created called:
	//FirstProperty (IsFirstProperty for bools), SetFirstProperty, FirstProperyChanged
	_ string `property:"firstProperty"`
}

//this function will be automatically called, when you use the `NewExampleStruct` function
func (s *exampleStruct) init() {
	//here you can do some initializing
	s.SetFirstProperty("defaultString")
	s.ConnectFirstSignal(func() { println("do something here") })
	s.ConnectSecondSignal(s.secondSignal)
}

func (s *exampleStruct) secondSignal(v0 bool, v1 int, v2 string, v3 []string, v4 map[string]string) {
	println("do something here")
}

There are some additions planned, such as:

custom constructors (with additional input and return parameters)
the option to automatically connect signals/slots
the option to make signals/slots/properties private
connect functions for properties

Run qtmoc -help for more infos.

qtminimal

qtminimal is not needed to be ran manually, as it is just used to reduce the overall compiled binary size, by analysing your code and re-generating a sub-set of the binding.

You can use it to generate the sub-set for the desktop target like this: qtminimal desktop path/to/your/project

(it's possible to obtain the path, if you are currently inside the project folder)

Then you could use go build -tags=minimal ... to compile against the slimmed down version of the binding.

Note that qtminimal should be always ran after the optional use of qtrcc or qtmoc.

Run qtminimal -help for more infos.

Speed up your development cycle

It's recommended to use qtdeploy -fast build ... if you want to have your project compiled as fast as possible.

This will skip most of the actions qtdeploy would take otherwise, such as running qtmoc, qtminimal and deploying your project.

Note that this option is only available for the desktop target, and it's mandatory to run the normal deployment at least once before using the -fast flag.

Beside the option to use the -fast flag, you could also just use qtrcc, qtmoc and qtminimal manually with go build.

Hello World

Run the setup
Choose one of the following examples and manually setup the $GOPATH/src/qtexample folder

Basic

widgets

$GOPATH/src/qtexample/main.go

package main

import (
	"os"

	"github.com/therecipe/qt/widgets"
)

func main() {

	widgets.NewQApplication(len(os.Args), os.Args)

	//create a window
	window := widgets.NewQMainWindow(nil, 0)
	window.SetWindowTitle("Hello World Example")
	window.SetMinimumSize2(200, 200)

	//create a layout
	layout := widgets.NewQVBoxLayout()

	//create a widget and set the layout
	widget := widgets.NewQWidget(nil, 0)
	widget.SetLayout(layout)

	//create a lineedit and add it to the layout
	input := widgets.NewQLineEdit(nil)
	input.SetPlaceholderText("1. write something")
	layout.AddWidget(input, 0, 0)

	//create a button and add it to the layout
	button := widgets.NewQPushButton2("2. click me", nil)
	button.ConnectClicked(func(checked bool) {
		widgets.QMessageBox_Information(nil, "OK", input.Text(), widgets.QMessageBox__Ok, widgets.QMessageBox__Ok)
	})
	layout.AddWidget(button, 0, 0)

	//add the widget as the central widget to the window
	window.SetCentralWidget(widget)

	//show the window
	window.Show()

	//enter the main event loop
	widgets.QApplication_Exec()
}

qml/quick

$GOPATH/src/qtexample/main.go

package main

import (
	"os"

	"github.com/therecipe/qt/core"
	"github.com/therecipe/qt/gui"
	"github.com/therecipe/qt/qml"
	"github.com/therecipe/qt/quickcontrols2"
)

func main() {

	//enable high dpi scaling
	core.QCoreApplication_SetAttribute(core.Qt__AA_EnableHighDpiScaling, true)

	gui.NewQGuiApplication(len(os.Args), os.Args)

	//use the material style for qml controls
	//"universal" is also available
	quickcontrols2.QQuickStyle_SetStyle("material")

	//create a qml application
	view := qml.NewQQmlApplicationEngine(nil)

	//load the main qml file
	view.Load(core.NewQUrl3("qrc:/qml/main.qml", 0))

	//enter the main event loop
	gui.QGuiApplication_Exec()
}

$GOPATH/src/qtexample/qml/main.qml

import QtQuick 2.7
import QtQuick.Controls 2.1

ApplicationWindow {
  id: window

  visible: true
  title: "Hello World Example"
  minimumWidth: 400
  minimumHeight: 400

  Column {
    anchors.centerIn: parent

    TextField {
      id: input

      anchors.horizontalCenter: parent.horizontalCenter

      placeholderText: "1. write something"
    }

    Button {
      anchors.horizontalCenter: parent.horizontalCenter

      text: "2. click me"
      onClicked: dialog.open()
    }
  }

  Dialog {
    contentWidth: window.width / 2
    contentHeight: window.height / 4

    id: dialog
    standardButtons: Dialog.Ok

    contentItem: Label {
      text: input.text
    }
  }
}

Advanced

widgets

$GOPATH/src/qtexample/main.go

package main

import (
	"fmt"
	"os"
	"time"

	"github.com/therecipe/qt/core"
	"github.com/therecipe/qt/widgets"
)

//go:generate qtmoc
type MocLabel struct {
	widgets.QLabel

	_ func(int) `signal:"updateLabel"`
}

func main() {

	widgets.NewQApplication(len(os.Args), os.Args)

	//create a window
	window := widgets.NewQMainWindow(nil, 0)
	window.SetWindowTitle("Hello World Example")
	window.SetMinimumSize2(200, 200)

	//create a layout
	layout := widgets.NewQVBoxLayout()

	//create a widget and set the layout
	widget := widgets.NewQWidget(nil, 0)
	widget.SetLayout(layout)

	//create a moc label
	label := NewMocLabel(nil, 0)
	label.SetAlignment(core.Qt__AlignCenter)

	//wrap the setText function with a custom signal
	label.ConnectUpdateLabel(func(s int) {

		//we are back in the main thread
		//so it's safe to update the label now
		label.SetText(fmt.Sprintf("%v second(s)", s))
	})

	//setup a ticker to update the label in the background
	t := time.Now()
	ticker := time.NewTicker(1 * time.Second)
	go func() {
		for _ = range ticker.C {
			label.UpdateLabel(int(time.Since(t).Seconds()))
		}
	}()

	//add the label to the layout
	layout.AddWidget(label, 0, 0)

	//create a button and add it to the layout
	button := widgets.NewQPushButton2("reset ticker", nil)
	button.ConnectClicked(func(checked bool) {
		label.UpdateLabel(0)
		t = time.Now()
	})
	layout.AddWidget(button, 0, 0)

	//add the widget as the central widget to the window
	window.SetCentralWidget(widget)

	//show the window
	window.Show()

	//enter the main event loop
	widgets.QApplication_Exec()
}

qml/quick

$GOPATH/src/qtexample/main.go

package main

import (
	"os"
	"time"

	"github.com/therecipe/qt/core"
	"github.com/therecipe/qt/gui"
	"github.com/therecipe/qt/qml"
	"github.com/therecipe/qt/quickcontrols2"
)

//go:generate qtmoc
type MocBridge struct {
	core.QObject

	_ func(secs int) `signal:"updateLabel"`
	_ func()         `signal:"resetTicker"`
}

func main() {

	//enable high dpi scaling
	core.QCoreApplication_SetAttribute(core.Qt__AA_EnableHighDpiScaling, true)

	gui.NewQGuiApplication(len(os.Args), os.Args)

	//use the material style for qml controls
	//"universal" is also available
	quickcontrols2.QQuickStyle_SetStyle("material")

	//create a qml application
	app := qml.NewQQmlApplicationEngine(nil)

	//create a moc bridge
	bridge := NewMocBridge(nil)

	//setup a ticker to update the label in the background
	t := time.Now()
	ticker := time.NewTicker(1 * time.Second)
	go func() {
		for _ = range ticker.C {
			//call the connected "onUpdateLabel" signal on the qml side
			bridge.UpdateLabel(int(time.Since(t).Seconds()))
		}
	}()

	//connect the resetTicker function that is later called by qml
	bridge.ConnectResetTicker(func() {
		t = time.Now()
	})

	//make the bridge object accessible inside qml as "go"
	app.RootContext().SetContextProperty("go", bridge)

	//load the main qml file
	app.Load(core.NewQUrl3("qrc:/qml/main.qml", 0))

	//enter the main event loop
	gui.QGuiApplication_Exec()
}

$GOPATH/src/qtexample/qml/main.qml

import QtQuick 2.7
import QtQuick.Controls 2.1

ApplicationWindow {
  id: window

  visible: true
  title: "Hello World Example"
  minimumWidth: 400
  minimumHeight: 400

  Column {
    anchors.centerIn: parent

    Label {
      id: label

      anchors.horizontalCenter: parent.horizontalCenter

      Connections {
        target: go
        onUpdateLabel: {
          label.text = secs + " second(s)"
        }
      }
    }

    Button {
      anchors.horizontalCenter: parent.horizontalCenter

      text: "reset ticker"
      onClicked: {
        go.updateLabel(0)
        go.resetTicker()
      }
    }
  }
}

Run qtdeploy test desktop $GOPATH/src/qtexample to compile, deploy and start the application.
More examples can be found here

Continuous integration and deployment

There are a few possible ways how you can integrate this dependency into your CI or CD plan.

You could create your own docker image(s) on top of the pre-built docker images.
You could pull the docker images for your target and then automate your work inside the (disposable) container.
You could use the minimal setup, which only depends on Docker + Go and then use qtdeploy -docker build ...
You could look into the CI folder and the *.yml files in the root folder of this repo.

Misc

Qt documentation

#qt-binding Slack channel (invite)

An Video Overview of GUI technologies in Qt

Debugging and Profiling Qml Applications

Export QT_DEBUG_QML=true
Run qtdeploy (-fast or go build/run won't work)
Manually start the created binary with: -qmljsdebugger=port:8080,block
Open the created debug.pro
For debugging: Debug > Start Debugging > Attach to QML Port...
For profiling: Analyze > QML Profiler (External)
- https://doc.qt.io/qtcreator/creator-qml-performance-monitor.html
- https://doc.qt.io/qt-5/qtquick-visualcanvas-scenegraph-renderer.html#visualizing-overdraw

Drag & Drop WYSIWYG Editors

For the desktop widgets: https://doc.qt.io/qtcreator/creator-using-qt-designer.html

Here is an example how to load the created *.ui files.

For the qml/quick widgets: https://doc.qt.io/qtcreator/creator-using-qt-quick-designer.html

The created *.qml files can later be used like hand written qml files.

Code Editor Settings (for code completion)

On windows, depending on your editor or IDE you may also need to export GOARCH=386 to make the code completion work.

IntelliJ Idea / Gogland

Help > Edit Custom Properties

# custom IntelliJ IDEA properties

idea.max.intellisense.filesize=999999

Help > Edit Custom VM Options

# custom IntelliJ IDEA VM options

-Xms128m
-Xmx4000m
-XX:ReservedCodeCacheSize=512m
-XX:+UseCompressedOops

Neovim

Update your neocomplete.vim

let g:neocomplete#skip_auto_completion_time = ""

3rd party examples / demos / applications

License

This binding is available under LGPLv3.

Qt is available under multiple licenses: https://www.qt.io/licensing

Name		Name	Last commit message	Last commit date
Latest commit History 509 Commits
androidextras		androidextras
bluetooth		bluetooth
charts		charts
cmd		cmd
core		core
datavisualization		datavisualization
dbus		dbus
designer		designer
gamepad		gamepad
gui		gui
help		help
internal		internal
location		location
macextras		macextras
multimedia		multimedia
network		network
nfc		nfc
positioning		positioning
printsupport		printsupport
purchasing		purchasing
qml		qml
quick		quick
quickcontrols2		quickcontrols2
sailfish		sailfish
script		script
scripttools		scripttools
scxml		scxml
sensors		sensors
serialbus		serialbus
serialport		serialport
speech		speech
sql		sql
svg		svg
testlib		testlib
uitools		uitools
webchannel		webchannel
webengine		webengine
webkit		webkit
websockets		websockets
webview		webview
widgets		widgets
xml		xml
xmlpatterns		xmlpatterns
.gitignore		.gitignore
.travis.yml		.travis.yml
LICENSE		LICENSE
README.md		README.md
_config.yml		_config.yml
appveyor.yml		appveyor.yml
circle.yml		circle.yml
qt.go		qt.go
qt_android.go		qt_android.go
screenshots.md		screenshots.md

License

hubyhuby/qt

Folders and files

Latest commit

History

Repository files navigation

Introduction

Status

Targets

FAQ

Docker

Installation

Minimal Setup

Regular Setup

Desktop

Windows

macOS

Linux

Mobile

Embedded

Raspberry Pi

Additional Modules

Target Specific Infos And Settings

Desktop

General

Environmental Variables

Windows Host

Linux or macOS Host

Branding

Environmental Variables

Branding

Environmental Variables

Branding

Mobile

Environmental Variables

Branding

Java Native Interface (JNI)

Android Wear

Branding

Environmental Variables

Branding

Embedded

Environmental Variables

Branding

Tools

Speed up your development cycle

Hello World

Basic

Advanced

Continuous integration and deployment

Misc

License

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages