IC-GVINS

A Robust, Real-time, INS-Centric GNSS-Visual-Inertial Navigation System

Visual navigation systems are susceptible to complex environments, while inertial navigation systems (INS) are not affected by external factors. Hence, we present IC-GVINS, a robust, real-time, INS-centric global navigation satellite system (GNSS)-visual-inertial navigation system to fully utilize the INS advantages. The Earth rotation has been compensated in the INS to improve the accuracy of high-grade inertial measurement units (IMUs). To promote the system robustness in high-dynamic conditions, the precise INS information is employed to assist the feature tracking and landmark triangulation. With a GNSS-aided initialization, the IMU, visual, and GNSS measurements are tightly fused in a unified world frame within the factor graph optimization framework.

Authors: Hailiang Tang, Xiaoji Niu, and Tisheng Zhang from the Integrated and Intelligent Navigation (i2Nav) Group, Wuhan University.

Related Paper:

• Xiaoji Niu, Hailiang Tang, Tisheng Zhang, Jing Fan, and Jingnan Liu, “IC-GVINS: A Robust, Real-time, INS-Centric GNSS-Visual-Inertial Navigation System,” IEEE Robotics and Automation Letters, 2022.
• Hailiang Tang, Tisheng Zhang, Xiaoji Niu, Jing Fan, and Jingnan Liu, “Impact of the Earth Rotation Compensation on MEMS-IMU Preintegration of Factor Graph Optimization,” IEEE Sensors Journal, 2022.

Related Video:

Click the following image to open our video on Bilibili.

Contacts:

• For any technique problem, you can send an email to Dr. Hailiang Tang ([email protected]).
• For Chinese users, we also provide a QQ group (481173293) for discussion. You are required to provide your organization and name.

1 Prerequisites

1.1 System and compiler

We recommend you use Ubuntu 18.04 or Ubuntu 20.04 with the newest compiler (gcc>=8.0 or clang>=6.0).

# gcc-8
sudo apt install gcc-8 g++-8

# Clang
# sudo apt install clang

1.2 Robot Operating System (ROS)

Follow ROS Melodic installation instructions for Ubuntu 18.04 and ROS Noetic installation instructions for Ubuntu 20.04.

1.3 Ceres Solver with its Dependencies

We use Ceres Solver to solve the non-linear least squares problem in IC-GVINS. The supported version is Ceres Solver 2.0.0 or 2.1.0. Please follow Ceres installation instructions.

The dependencies Eigen (>=3.3.7), TBB, glog (>=0.4.0) are also used in IC-GVINS. You can install them as follows:

sudo apt install libeigen3-dev libgoogle-glog-dev libtbb-dev

If the version cannot be satisfied in your system repository, you should build them from the source code.

1.4 OpenCV

The supported version is OpenCV (>=3.2.0). You can install OpenCV from your system repository or build from the source code. OpenCV 4 is also supported in IC-GVINS.

sudo apt install libopencv-dev

1.5 yaml-cpp

sudo apt install libyaml-cpp-dev

2 Build and run IC-GVINS

2.1 Build the source code

# Make workspace directory
mkdir ~/gvins_ws && cd ~/gvins_ws
mkdir src && cd src

# Clone the repository into src directory
git clone https://github.com/i2Nav-WHU/IC-GVINS.git

# To gvins_ws directory
cd ..

# Build the source code using catkin_make
# For gcc
catkin_make -j8 -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc-8 -DCMAKE_CXX_COMPILER=g++-8
# For clang
# catkin_make -j8 -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++

2.2 Run demo dataset

If you have already downloaded the open-sourced dataset, run the following commands.

# Open a terminal and source the workspace environments
# For bash
source ~/gvins_ws/devel/setup.bash
# For zsh
# source ~/gvins_ws/devel/setup.zsh

# Run IC-GVINS node
# You should change the path in both the configuration file and command line
roslaunch ic_gvins ic_gvins.launch configfile:=path/urban38/IC-GVINS/gvins.yaml

# Open another terminal to play the ROS bag
rosbag play path/urban38/urban38.bag

3 Datasets

3.1 Format

We use standard ROS bag for IC-GVINS. The employed messages are as follows:

Sensor	Message	Default Topic	KAIST Dataset (Hz)	IC-GVINS Dataset (Hz)
Camera	sensor_msgs/Image	/cam0	10	20
IMU	sensor_msgs/Imu	/imu0	100	200
GNSS-RTK	sensor_msgs/NavSatFix	/gnss0	1	1

The IMU should be in front-right-down format in the IC-GVINS.

3.2 KAIST Complex Urban Dataset

The tested sequences are urban38 and urban39.

Sequence	Time length (seconds)	Trajectory Length (m)	Baidu Cloud Link
urban38 (top)	2154	11191	urban38.bag (gyvr)
urban39 (bottom)	1856	10678	urban39.bag (mnrn)

3.3 IC-GVINS Robot Dataset

We also open source our self-collected robot dataset.

Sequence	Time length (seconds)	Trajectory Length (m)	Baidu Cloud Link
campus (top)	950	1337	campus.bag (igks)
building (bottom)	1820	2560	building.bag (2drg)

3.4 Your own dataset

You can run IC-GVINS with your self-collected dataset. Keep in mind the following notes:

1. You should prepare well-synchronized GNSS, Camera, and IMU data in a ROS bag;
2. The IMU data should be in front-right-down format;
3. Modify the topic names in the ic_gvins.launch file;
4. Modify the parameters in the configuration file.

3.5 Evaluation

We use evo to evaluate the TUM trajectory files. We also provide some useful scripts (evaluate_odometry) for evaluation.

4 Acknowledgements

We thanks the following projects for the helps in developing and evaluating the IC-GVINS:

• OB_GINS: An Optimization-Based GNSS/INS Integrated Navigation System
• VINS-Fusion: An optimization-based multi-sensor state estimator
• Complex Urban Dataset: Complex Urban Dataset with Multi-level Sensors from Highly Diverse Urban Environments
• evo: Python package for the evaluation of odometry and SLAM

5 License

The source code is released under GPLv3 license.

We are still working on improving the code. For any technical issues, please contact Dr. Hailiang Tang ([email protected]) or open an issue at this repository.

For commercial usage, please contact Prof. Xiaoji Niu ([email protected]).