Update README.md

README.md

@@ -146,7 +146,7 @@ If this is not what you need, you have to switch to Manual Configuration.
    | [DFRobot FireBeetle ESP32 IoT Microcontroller](https://www.dfrobot.com/product-1590.html) with [FireBeetle Cover LoRa Radio 868MHz](https://www.dfrobot.com/product-1831.html) | "FireBeetle-ESP32" | n.a.                       | ARDUINO_ESP32_DEV & FIREBEETLE_ESP32_COVER_LORA | SX1276 (LoRa1276) | Wiring on the cover: <br>D2 to RESET<br>D3 to DIO0<br>D4 to CS<br>D5 to DIO1 |
    | [Adafruit Feather ESP32S2 with Adafruit LoRa Radio FeatherWing](https://github.com/matthias-bs/BresserWeatherSensorReceiver#adafruit-feather-esp32s2-with-adafruit-lora-radio-featherwing)                                | "Adafruit Feather ESP32-S2" | n.a.               | ARDUINO_<br>ADAFRUIT_FEATHER_ESP32S2   | SX1276 (RFM95W) | **No Bluetooth available!**<br>Wiring on the Featherwing:<br>E to IRQ<br>D to CS<br>C to RST<br>A to DI01 |
 | [Thingpulse ePulse Feather](https://thingpulse.com/product/epulse-feather-low-power-esp32-development-board/) with [Adafruit LoRa Radio FeatherWing](https://www.adafruit.com/product/3231)     | "Adafruit ESP32 Feather" | n.a.               | ARDUINO_FEATHER_ESP32   | SX1276 (RFM95W) | Wiring on the Featherwing:<br>E to IRQ<br>D to CS<br>C to RST<br>A to DI01<br><br>**see** [**#55**](https://github.com/matthias-bs/BresserWeatherSensorTTN/issues/55) |
-| [Adafruit Feather RP2040](https://www.adafruit.com/product/4884) with [Adafruit LoRa Radio FeatherWing](https://www.adafruit.com/product/3231)     | "Adafruit Feather RP2040" | n.a.               | ARDUINO_ADAFRUIT_FEATHER_RP2040   | SX1276 (RFM95W) | **No Bluetooth available!**<br>Wiring on the Featherwing:<br>E to IRQ<br>D to CS<br>C to RST<br>A to DI01<br><br>**see** [**#72**](https://github.com/matthias-bs/BresserWeatherSensorTTN/issues/72) |
+| [Adafruit Feather RP2040](https://www.adafruit.com/product/4884) with [Adafruit LoRa Radio FeatherWing](https://www.adafruit.com/product/3231)     | "Adafruit Feather RP2040" | n.a.               | ARDUINO_ADAFRUIT_FEATHER_RP2040   | SX1276 (RFM95W) | **No Bluetooth available!**<br>**Distance sensor not integrated yet!**<br>Wiring on the Featherwing:<br>E to IRQ<br>D to CS<br>C to RST<br>A to DI01<br><br>**see** [**#72**](https://github.com/matthias-bs/BresserWeatherSensorTTN/issues/72) |
 
 If enabled in the Arduino IDE Preferences ("Verbose Output"), the preprosessor will provide some output regarding the selected configuration, e.g.