Updated Thingpulse ePulse Feather

README.md

@@ -37,7 +37,7 @@ Auxiliary sensor data can be integrated via Bluetooth Low Energy (BLE), OneWire,
 
 * *Presumably* [Adafruit Feather ESP32](https://www.adafruit.com/product/3405) with [Adafruit LoRa Radio FeatherWing](https://www.adafruit.com/product/3231) (confirmation wanted!!!)
 
-* [Thingpulse ePulse Feather](https://thingpulse.com/product/epulse-feather-low-power-esp32-development-board/) with [Adafruit LoRa Radio FeatherWing](https://www.adafruit.com/product/3231) (**see** [**#56**](https://github.com/matthias-bs/BresserWeatherSensorTTN/issues/56))
+* [Thingpulse ePulse Feather](https://thingpulse.com/product/epulse-feather-low-power-esp32-development-board/) with [Adafruit LoRa Radio FeatherWing](https://www.adafruit.com/product/3231)
 
 * [DFRobot FireBeetle ESP32 IoT Microcontroller](https://www.dfrobot.com/product-1590.html) with [FireBeetle Cover LoRa Radio 868MHz](https://www.dfrobot.com/product-1831.html)
 
@@ -161,7 +161,7 @@ If this is not what you need, you have to switch to Manual Configuration.
    | [LoRaWAN_Node](https://github.com/matthias-bs/LoRaWAN_Node)      | "FireBeetle-ESP32" | n.a.                       | ARDUINO_ESP32_DEV -> LORAWAN_NODE     | SX1276 (RFM95W) | -      |
    | [DFRobot FireBeetle ESP32 IoT Microcontroller](https://www.dfrobot.com/product-1590.html) with [FireBeetle Cover LoRa Radio 868MHz](https://www.dfrobot.com/product-1831.html) | "FireBeetle-ESP32" | n.a.                       | ARDUINO_ESP32_DEV & FIREBEETLE_ESP32_COVER_LORA | SX1276 (LoRa1276) | Wiring on the cover: <br>D2 to RESET<br>D3 to DIO0<br>D4 to CS<br>D5 to DIO1 |
    | [Adafruit Feather ESP32S2 with Adafruit LoRa Radio FeatherWing](https://github.com/matthias-bs/BresserWeatherSensorReceiver#adafruit-feather-esp32s2-with-adafruit-lora-radio-featherwing)                                | "Adafruit Feather ESP32-S2" | n.a.               | ARDUINO_<br>ADAFRUIT_FEATHER_ESP32S2   | SX1276 (RFM95W) | **No Bluetooth available!**<br>Wiring on the Featherwing:<br>E to IRQ<br>D to CS<br>C to RST<br>A to DI01 |
-| [Thingpulse ePulse Feather](https://thingpulse.com/product/epulse-feather-low-power-esp32-development-board/) with [Adafruit LoRa Radio FeatherWing](https://www.adafruit.com/product/3231)     | "Adafruit ESP32 Feather" | n.a.               | ARDUINO_FEATHER_ESP32   | SX1276 (RFM95W) | Wiring on the Featherwing:<br>E to IRQ<br>D to CS<br>C to RST<br>A to DI01<br><br>**see** [**#55**](https://github.com/matthias-bs/BresserWeatherSensorTTN/issues/55) |
+| [Thingpulse ePulse Feather](https://thingpulse.com/product/epulse-feather-low-power-esp32-development-board/) with [Adafruit LoRa Radio FeatherWing](https://www.adafruit.com/product/3231)     | "Adafruit ESP32 Feather" | n.a.               | ARDUINO_FEATHER_ESP32   | SX1276 (RFM95W) | Wiring on the Featherwing:<br>E to IRQ<br>D to CS<br>C to RST<br>A to DI01 |
 | [M5Stack Core2](https://docs.m5stack.com/en/core/core2) with [M5Stack Module LoRa868](https://docs.m5stack.com/en/module/lora868)   | "M5Core2" | n.a.               | ARDUINO_M5STACK_CORE2   | SX1276 (RA-01H) | Wiring on the LoRa868 Module: <br>DIO1 to GPIO35<br><br>"M5Unified" must be installed <br>`M5.begin()`is called to control power management |
 | [Adafruit Feather RP2040](https://www.adafruit.com/product/4884) with [Adafruit LoRa Radio FeatherWing](https://www.adafruit.com/product/3231)     | "Adafruit Feather RP2040" | n.a.               | ARDUINO_ADAFRUIT_FEATHER_RP2040   | SX1276 (RFM95W) | **No Bluetooth available!**<br>**Configuration: Choose an entry with "FS" in section __Flash Size__!**<br>Wiring on the Featherwing:<br>E to IRQ<br>D to CS<br>C to RST<br>A to DI01 |