Default rebroadcast mode for Router and Repeater to ignore problematic portnums #10594

Job	Run time
setup (esp32)	3s
setup (esp32s3)	2s
setup (esp32c3)	4s
setup (esp32c6)	4s
setup (nrf52840)	4s
setup (rp2040)	6s
setup (stm32)	3s
setup (check)	5s
package-raspbian-armv7l / build-raspbian_armv7l / build-raspbian-armv7l	58s
package-raspbian / build-raspbian / build-raspbian	5m 12s
package-native / build-native / build-native	2m 21s
check (rak4631_eth_gw)	31s
check (rak2560)	35s
check (heltec-v3)	41s
build-esp32 (meshtastic-diy-v1) / build-esp32	37s
build-esp32 (rak11200) / build-esp32	48s
build-esp32 (tlora-v2-1-1_8) / build-esp32	39s
build-esp32-s3 (heltec-wireless-tracker) / build-esp32-s3	35s
build-esp32-s3 (heltec-wsl-v3) / build-esp32-s3	40s
build-esp32-s3 (tracksenger-oled) / build-esp32-s3	28s
build-esp32-c3 (heltec-hru-3601) / build-esp32-c3	42s
build-esp32-c3 (heltec-ht62-esp32c3-sx1262) / build-esp32-c3	44s
build-esp32-c6 (tlora-c6) / build-esp32-c6	44s
build-nrf52 (canaryone) / build-nrf52	30s
build-nrf52 (tracker-t1000-e) / build-nrf52	35s
build-nrf52 (wio-tracker-wm1110) / build-nrf52	36s
build-rpi2040 (feather_rp2040_rfm95) / build-rpi2040	32s
build-rpi2040 (picow) / build-rpi2040	37s
build-rpi2040 (rp2040-lora) / build-rpi2040	42s
build-stm32 (rak3172) / build-stm32	55s
build-stm32 (wio-e5) / build-stm32	50s
package-native / package-native	45s
package-raspbian-armv7l / package-raspbian_armv7l	0s
package-raspbian / package-raspbian	45s
after-checks	0s
gather-artifacts	0s
release-artifacts	0s
release-firmware	0s
	23m 33s

Provide feedback