Revert "Decrease max nodes for NRF52 to 80 as workaround to prevent FS blowouts" #10959

Job	Run time
setup (esp32)	3s
setup (esp32s3)	2s
setup (esp32c3)	4s
setup (esp32c6)	9s
setup (nrf52840)	3s
setup (rp2040)	6s
setup (stm32)	6s
setup (check)	4s
package-native / build-native / build-native	2m 7s
package-raspbian-armv7l / build-raspbian_armv7l / build-raspbian-armv7l	1s
package-raspbian / build-raspbian / build-raspbian	1s
check (heltec_capsule_sensor_v3)	4m 36s
check (rak4631)	4m 20s
check (t-deck)	5m 39s
build-esp32-c3 (heltec-hru-3601) / build-esp32-c3	6m 6s
build-esp32 (m5stack-core) / build-esp32	6m 48s
build-esp32-c3 (heltec-ht62-esp32c3-sx1262) / build-esp32-c3	5m 49s
build-esp32 (m5stack-coreink) / build-esp32	6m 16s
build-esp32 (tlora-v2-1-1_6-tcxo) / build-esp32	6m 8s
build-esp32-c6 (tlora-c6) / build-esp32-c6	6m 2s
build-esp32-s3 (m5stack-cores3) / build-esp32-s3	6m 0s
build-esp32-s3 (tbeam-s3-core) / build-esp32-s3	6m 28s
build-nrf52 (t-echo) / build-nrf52	4m 4s
build-esp32-s3 (tlora-t3s3-v1) / build-esp32-s3	7m 38s
build-nrf52 (wio-sdk-wm1110) / build-nrf52	3m 56s
build-nrf52 (tracker-t1000-e) / build-nrf52	4m 23s
build-rpi2040 (feather_rp2040_rfm95) / build-rpi2040	5m 9s
build-rpi2040 (pico) / build-rpi2040	5m 3s
build-rpi2040 (rp2040-lora) / build-rpi2040	4m 58s
build-stm32 (wio-e5) / build-stm32	1s
build-stm32 (rak3172) / build-stm32	3m 40s
package-native / package-native	51s
after-checks	30s
gather-artifacts	0s
package-raspbian / package-raspbian	1s
package-raspbian-armv7l / package-raspbian_armv7l	1s
release-artifacts	1s
release-firmware	1s
	1h 47m 15s

Provide feedback