[Board]: Support for M5Stack CoreS3

[lboue]

Add support for M5Stack CoreS3 variant:

• M5Stack CoreS3

• LoRa868_V1.1 Module with RA01H (SX1276)

• Radio LoRa part

• LCD display

[CLAassistant]

All committers have signed the CLA.

[CLAassistant]

Thank you for your submission! We really appreciate it. Like many open source projects, we ask that you sign our Contributor License Agreement before we can accept your contribution.
_{You have signed the CLA already but the status is still pending? Let us recheck it.}

[fifieldt]

Thanks for your first patch! Welcome to the community :)

[lboue]

Done: Add support for M5Stack CoreS3 variant #585

Changed now

[prusnak]

• LoRa868_V1.1 Module with RA01H (SX1276)

Are you going to work on adding support for LoRa868_V1.1? So far this PR only adds CoreS3 support

edit: nevermind, the LoRa868_V1.1 support is in #4471

[lboue]

I manged to send a LoRa message to a Heltec V3 node from my CoreS3.

[08:14:40]  DEBUG | ??:??:?? 6  RF95Interface(cs=6, irq=14, rst=5, busy=-1)
[08:14:40]  INFO  | ??:??:?? 6  Starting meshradio init...
[08:14:40]  DEBUG | ??:??:?? 6  (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=0, time 231 ms
[08:14:40]  DEBUG | ??:??:?? 6  (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=253, time 2115 ms
[08:14:40]  INFO  | ??:??:?? 6  Radio freq=869.525, config.lora.frequency_offset=0.000
[08:14:40]  INFO  | ??:??:?? 6  Set radio: region=EU_868, name=LongFast, config=0, ch=0, power=27
[08:14:40]  INFO  | ??:??:?? 6  Radio myRegion->freqStart -> myRegion->freqEnd: 869.400024 -> 869.650024 (0.250000 MHz)
[08:14:40]  INFO  | ??:??:?? 6  Radio myRegion->numChannels: 1 x 250.000kHz
[08:14:40]  INFO  | ??:??:?? 6  Radio channel_num: 1
[08:14:40]  INFO  | ??:??:?? 6  Radio frequency: 869.525024
[08:14:40]  INFO  | ??:??:?? 6  Slot time: 77 msec
[08:14:40]  INFO  | ??:??:?? 6  Set radio: final power level=20
[08:14:40]  DEBUG | ??:??:?? 6  Current limit set to 100.000000
[08:14:40]  DEBUG | ??:??:?? 6  Current limit set result 0
[08:14:40]  INFO  | ??:??:?? 6  RF95 init result 0
[08:14:40]  INFO  | ??:??:?? 6  Frequency set to 869.525024
[08:14:40]  INFO  | ??:??:?? 6  Bandwidth set to 250.000000
[08:14:40]  INFO  | ??:??:?? 6  Power output set to 20
[08:14:40] E (6615) gpio: gpio_isr_handler_remove(482): GPIO isr service is not installed, call gpio_install_isr_service() first
[08:14:40] INFO  | ??:??:?? 6  RF95 Radio init succeeded, using RF95 radio
[08:14:40]  INFO  | ??:??:?? 6  Not using WIFI
[08:14:40]  DEBUG | ??:??:?? 6  (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=237, time 2000 ms
[08:14:40]  DEBUG | ??:??:?? 6  LoRA bitrate = 118.500000 bytes / sec
[08:14:40]  INFO  | ??:??:?? 6  PowerFSM init, USB power=1
[08:14:40]  DEBUG | ??:??:?? 6  Enter state: BOOT
[08:14:40] [  6963][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 6 = 80 Mhz, APB: 80000000 Hz
[08:14:40] DEBUG | ??:??:?? 6 [Power]  Battery: usbPower=1, isCharging=1, batMv=3987, batPct=70
[08:14:40]  INFO  | ??:??:?? 6 [RangeTestModule]  Range Test Module - Disabled
[08:14:41]  INFO  | ??:??:?? 9 [PowerFSM]  Initialise the NimBLE bluetooth module
[08:14:42]  INFO  | ??:?:?? 11  Starting PI client config

[lboue]

Closing this in favor of #5049