Arduino is a great development platform, which is easy to use. It has everything a beginner should need. The Arduino IDE simplifies a lot of things for the standard user, but if you are a professional programmer the IDE can feel simplistic and restrictive.
One major drawback of the Arduino IDE is that you cannot do anything without it, which for me is a complete buzz kill. Thats why I created an alternative build system for the Arduino using CMake.
CMake is great cross-platform build system that works on practically any operating system. With it you are not constrained to a single build system. CMake lets you generate the build system that fits your needs, using the tools you like. It can generate any type of build system, from simple Makefiles, to complete projects for Eclipse, Visual Studio, XCode, etc.
The Arduino CMake build system integrates tightly with the Arduino SDK.
Arduino SDK version 0.19 or higher is required.
So if you like to do things from the command line (using make), or to build your firmware where you're in control, or if you would like to use an IDE such as Eclipse, KDevelop, XCode, CodeBlocks or something similar, then Arduino CMake is the system for you.
- Integrates with Arduino SDK
- Supports all Arduino boards.
- Supports Arduino type libraries
- Automatic detection of Arduino libraries.
- Generates firmware images.
- Generates libraries.
- Sketch support.
- Upload support.
- Hardware Platform support.
- Programmer support (with bootloader upload).
- Supports multiple build system types (Makefiles, Eclipse, KDevelop, CodeBlocks, XCode, etc).
- Cross-platform: Windows, Linux, Mac
- Extensible build system, thanks to CMake
Arduino CMake is hosted on GitHub and is available at:
https://github.com/queezythegreat/arduino-cmake
Did you find a bug or would like a specific feature, please report it at:
https://github.com/queezythegreat/arduino-cmake/issues
If you would like to hack on this project, don't hesitate to fork it on GitHub.
I will be glad to integrate your changes if you send me a Pull Request.
- Base requirements:
CMake- http://www.cmake.org/cmake/resources/software.htmlArduino SDK- http://www.arduino.cc/en/Main/Software
- Linux requirements:
gcc-avr- AVR GNU GCC compilerbinutils-avr- AVR binary toolsavr-libc- AVR C libraryavrdude- Firmware uploader
I would like to thank the following people for contributing to Arduino CMake:
- Marc Plano-Lesay (Kernald)
- James Goppert (jgoppert)
- Matt Tyler (matt-tyler)
- Andrew Stromme (astromme)
- johnyb
- arunh
- Sebastian Herp (sebastianherp)
- Michael Daffin (james147)
- Pavel Ilin (PIlin)
- Igor Mikolic-Torreira (igormiktor)
- Claudio Henrique Fortes Felix (chffelix)
- Alexandre Tuleu (atuleu)
- getSurreal
- Sebastian Zaffarano (szaffarano)
- cheshirekow
- Logan Engstrom (meadowstream)
- Francisco Ramírez (franramirez688)
- Brendan Shillingford (bshillingford)
- Mike Purvis (mikepurvis)
- Steffen Hanikel (hanikesn)
This Source Code Form is subject to the terms of the Mozilla Public License, v. 2.0. If a copy of the MPL was not distributed with this file, You can obtain one at http://mozilla.org/MPL/2.0/.
- Test more complex configurations and error handling
- Getting Started
- Using Arduino CMake
- Linux Environment
- Mac OS X Environment
- Windows Environment
- Eclipse Environment
- Troubleshooting
- Resources
The following instructions are for *nix type systems, specifically this is a Linux example.
In short you can get up and running using the following commands:
mkdir build cd build cmake .. make make upload # to upload all firmware images [optional] make blink-serial # to get a serial terminal to wire_serial [optional]
For a more detailed explanation, please read on...
Toolchain file
In order to build firmware for the Arduino you have to specify a toolchain file to enable cross-compilation. There are two ways of specifying the file, either at the command line or from within the CMakeLists.txt configuration files. The bundled example uses the second approach like so:
set(CMAKE_TOOLCHAIN_FILE ${CMAKE_SOURCE_DIR}/cmake/ArduinoToolchain.cmake)Please note that this must be before the
project(...)command.If you would like to specify it from the command line, heres how:
cmake -DCMAKE_TOOLCHAIN_FILE=../path/to/toolchain/file.cmake PATH_TO_SOURCE_DIR
Creating a build directory
The second order of business is creating a build directory. CMake has a great feature called out-of-source builds, what this means is the building is done in a completely separate directory from where the sources are. The benefit of this is you don't have any clutter in you source directory and you won't accidentally commit something that is auto-generated.
So let's create that build directory:
mkdir build cd build
Creating the build system
Now let's create the build system that will create our firmware:
cmake ..
To specify the build system type, use the
-Goption, for example:cmake -G"Eclipse CDT4 - Unix Makefiles" ..
If you rather use a GUI, use:
cmake-gui ..
Building
Next we will build everything:
make
Uploading
Once everything built correctly we can upload. Depending on your Arduino you will have to update the serial port used for uploading the firmware. To change the port please edit the following variable in CMakeLists.txt:
set(${FIRMWARE_NAME}_PORT /path/to/device)Ok lets do a upload of all firmware images:
make upload
If you have an upload sync error then try resetting/ power cycling the board before starting the upload process.
Serial output
If you have some serial output, you can launch a serial terminal from the build system. The command used for executing the serial terminal is user configurable by the following setting:
set(${FIRMWARE_NAME}_SERIAL serial command goes here)In order to get access to the serial port use the following in your command:
@SERIAL_PORT@
That constant will get replaced with the actual serial port used (see uploading). In the case of our example configuration we can get the serial terminal by executing the following:
make blink-serial
In order to use Arduino CMake just include the toolchain file, everything will get set up for building. You can set the toolchain in CMakeList.txt like so:
set(CMAKE_TOOLCHAIN_FILE ${CMAKE_SOURCE_DIR}/cmake/ArduinoToolchain.cmake)
Please note that this must be before the project(...) command.
You can also specify it at build configuration time:
cmake -DCMAKE_TOOLCHAIN_FILE=../path/to/toolchain/file.cmake PATH_TO_SOURCE_DIR
Once you have the Arduino CMake loaded you can start defining firmware images.
To create Arduino firmware in CMake you use the generate_arduino_firmware command. The full syntax of the command is:
generate_arduino_firmware(target_name
[BOARD board_id]
[SKETCH sketch_path | SRCS src1 src2 ... srcN]
[HDRS hdr1 hdr2 ... hdrN]
[LIBS lib1 lib2 ... libN]
[PORT port]
[SERIAL serial_cmd]
[PROGRAMMER programmer_id]
[AFLAGS flags]
[NO_AUTOLIBS])
The options are:
| Name | Description | Required |
| BOARD | Board ID (such as uno, mega2560, ...) | REQUIRED |
| SKETCH | Sketch path (see Arduino Sketches) | SKETCH or SRCS are REQUIRED |
| SRCS | Source files | SKETCH or SRCS are REQUIRED |
| HDRS | Headers files (for project based build systems) | |
| LIBS | Libraries to link (see Creating libraries) | |
| PORT | Serial port, for upload and serial targets (see Upload Firmware) | |
| SERIAL | Serial command for serial target (see Serial Terminal) | |
| PROGRAMMER | Programmer ID, enables programmer burning (see Programmers). | |
| ARDLIBS | Manual list of Arduino type libraries, common use case is when the library header name does not match the librarie's directory name. ADVANCED OPTION! Can be used in conjuction with NO_AUTOLIBS. | |
| AFLAGS | avrdude flags for target | |
| NO_AUTOLIBS | Disable Arduino library detection (default On) | |
| MANUAL | Disable Arduino Core (enables pure AVR development) |
You can specify the options in two ways, either as the command arguments or as variables. When specifying the options as variables they must be named:
${TARGET_NAME}_${OPTION_NAME}
Where ${TARGET_NAME} is the name of you target and ${OPTION_NAME} is the name of the option.
So to create a target (firmware image) called blink, composed of blink.h and blink.cpp source files for the Arduino Uno, you write the following:
set(blink_SRCS blink.cpp) set(blink_HDRS blink.h) set(blink_BOARD uno) generate_arduino_firmware(blink)
The previous example can be rewritten as:
generate_arduino_firmware(blink
SRCS blink.cpp
HDRS blink.h
BOARD uno)
To enable firmware upload functionality, you need to add the PORT option:
set(blink_SRCS blink.cpp) set(blink_HDRS blink.h) set(blink_PORT /dev/ttyUSB0) set(blink_BOARD uno) generate_arduino_firmware(blink)
Or:
generate_arduino_firmware(blink
SRCS blink.cpp
HDRS blink.h
PORT /dev/ttyUSB0
BOARD uno)
Once defined there will be two targets available for uploading, ${TARGET_NAME}-upload and a global upload target (which will depend on all other upload targets defined in the build):
blink-upload- will upload just theblinkfirmwareupload- upload all firmware images registered for uploading
To enable serial terminal, use the SERIAL option (@SERIAL_PORT@ will be replaced with the PORT option):
set(blink_SRCS blink.cpp) set(blink_HDRS blink.h) set(blink_PORT /dev/ttyUSB0) set(blink_SERIAL picocom @SERIAL_PORT@ -b 9600 -l) set(blink_BOARD uno) generate_arduino_firmware(blink)
Alternatively:
generate_arduino_firmware(blink
SRCS blink.cpp
HDRS blink.h
PORT /dev/ttyUSB0
SERIAL picocom @SERIAL_PORT@ -b 9600 -l
BOARD uno)
This will create a target named ${TARGET_NAME}-serial (in this example: blink-serial).
Creating libraries is very similar to defining a firmware image, except we use the generate_arduino_library command. This command creates static libraries, and are not to be confused with Arduino Libraries. The full command syntax:
generate_arduino_library(name
[BOARD board_id]
[SRCS src1 src2 ... srcN]
[HDRS hdr1 hdr2 ... hdrN]
[LIBS lib1 lib2 ... libN]
[NO_AUTOLIBS])
The options are:
| Name | Description | Required |
| BOARD | Board ID (such as uno, mega2560, ...) | REQUIRED |
| SRCS | Source files | REQUIRED |
| HDRS | Headers files (for project based build systems) | |
| LIBS | Libraries to link (sets up dependency tracking) | |
| NO_AUTOLIBS | Disable Arduino library detection (default On) | |
| MANUAL | Disable Arduino Core (enables pure AVR development) |
You can specify the options in two ways, either as the command arguments or as variables. When specifying the options as variables they must be named:
${TARGET_NAME}_${OPTION_NAME}
Where ${TARGET_NAME} is the name of you target and ${OPTION_NAME} is the name of the option.
Let's define a simple library called blink_lib with two sources files for the Arduino Uno:
set(blink_lib_SRCS blink_lib.cpp) set(blink_lib_HDRS blink_lib.h) set(blink_lib_BOARD uno) generate_arduino_library(blink_lib)
The other way of defining the same thing is:
generate_arduino_library(blink_lib
SRCS blink_lib.cpp
HDRS blink_lib.h
BOARD uno)
Once that library is defined we can use it in our other firmware images... Let's add blink_lib to the blink firmware:
set(blink_SRCS blink.cpp) set(blink_HDRS blink.h) set(blink_LIBS blink_lib) set(blink_BOARD uno) generate_arduino_firmware(blink)
CMake has automatic dependency tracking, so when you build the blink target, blink_lib will automatically get built, in the right order.
To build a Arduino sketch use the SKETCH option (see Creating firmware images). For example:
set(blink_SKETCH ${ARDUINO_SDK_PATH}/examples/1.Basics/Blink) # Path to sketch directory
set(blink_BOARD uno)
generate_arduino_firmware(blink)
This will build the blink example from the Arduino SDK.
Note: When specifying the sketch directory path, arduino-cmake is expecting to find a sketch file named after the directory (with a extension of .pde or .ino).
You can also specify the path to the main sketch file, then the parent directory of that sketch will be search for additional sketch files.
Libraries are one of the more powerful features which the Arduino offers to users. Instead of rewriting code, people bundle their code in libraries and share them with others. The structure of these libraries is very simple, which makes them easy to create.
An Arduino library is any directory which contains a header named after the directory, simple. Any source files contained within that directory are part of the library. Here is a example of library a called ExampleLib:
ExampleLib/ |-- ExampleLib.h |-- ExampleLib.cpp `-- OtherLibSource.cpp
Now because the power of Arduino lies within those user-created libraries, support for them is built right into Arduino CMake. The Arduino SDK comes with a large number of default libraries and adding new libraries is simple.
To incorporate a library into your firmware, you can do one of three things:
Place the library next to the default Arduino libraries (located at ${ARDUINO_SDK}/libraries)
Place the library next to the firmware configuration file (same directory as the CMakeLists.txt)
Place the library in a separate folder and tell Arduino CMake the path to that directory.
To tell CMake where to search for libraries use the link_directories command. The command has to be used before defining any firmware or libraries requiring those libraries.
For example:
link_directories(${CMAKE_CURRENT_SOURCE_DIR}/libraries) link_directories(/home/username/arduino_libraries)
If a library contains nested sources, a special option must be defined to enable recursion. For example to enable recursion for the Arduino Wire library use:
set(Wire_RECURSE True)
The option name should be ${LIBRARY_NAME}_RECURSE, where in this case LIBRARY_NAME is equal to Wire.
Arduino Libraries are not to be confused with normal static libraries (for exmaple system libraries or libraries created using generate_arduino_library). The LIBS option only accepts static libraries, so do not list the Arduino Libraries in that option (as you will get an error).
Most Arduino libraries have examples bundled with them. If you would like to generate and upload some of those examples you can use the generate_arduino_example command. The syntax of the command is:
generate_arduino_example(target_name
LIBRARY library_name
EXAMPLE example_name
[BOARD board_id]
[PORT port]
[SERIAL serial command]
[PORGRAMMER programmer_id]
[AFLAGS avrdude_flags])
The options are:
| Name | Description | Required |
| LIBRARY | Library name. | REQUIRED |
| EXAMPLE | Example name. | REQUIRED |
| BOARD | Board ID (such as uno, mega2560, ...) | REQUIRED |
| PORT | Serial port, for upload and serial targets (see Upload Firmware) | |
| SERIAL | Serial command for serial target (see Serial Terminal) | |
| PROGRAMMER | Programmer ID, enables programmer burning (see Programmers). | |
| AFLAGS | avrdude flags for target |
To generate a target for the master_writer example from the Wire library for the Uno:
generate_arduino_example(wire_example
LIBRARY Wire
EXAMPLE master_writer
BOARD uno
PORT /dev/ttyUSB0)
You can also rewrite the previous like so:
set(wire_example_LIBRARY Wire) set(wire_example_EXAMPLE master_writer) set(wire_example_BOARD uno) set(wire_example_PORT /dev/ttyUSB0) generate_arduino_example(wire_example)
The previous example will generate the following two target:
wire_example wire_example-upload
The default compiler and linker flags should be fine for most projects. If you required specific compiler/linker flags, use the following options to change them:
| Name | Description |
| ARDUINO_C_FLAGS | C compiler flags |
| ARDUINO_CXX_FLAGS | C++ compiler flags |
| ARDUINO_LINKER_FLAGS | Linker flags |
Set these option either before the project() like so:
set(ARDUINO_C_FLAGS "-ffunction-sections -fdata-sections")
set(ARDUINO_CXX_FLAGS "${ARDUINO_C_FLAGS} -fno-exceptions")
set(ARDUINO_LINKER_FLAGS "-Wl,--gc-sections")
project(ArduinoExample C CXX)
or when configuring the project:
cmake -D"ARDUINO_C_FLAGS=-ffunction-sections -fdata-sections" ../path/to/sources/
Arduino CMake fully supports programmers for burning firmware and bootloader images directly onto the Arduino. If you have a programmer that is supported by the Arduino SDK, everything should work out of the box. As of version 1.0 of the Arduino SDK, the following programmers are supported:
| Programmer ID | Description |
| avrisp | AVR ISP |
| avrispmkii | AVRISP mkII |
| usbtinyisp | USBtinyISP |
| parallel | Parallel Programmer |
| arduinoisp | Arduino as ISP |
The programmers.txt file located in ${ARDUINO_SDK_PATH}/hardware/arduino/ lists all supported programmers by the Arduino SDK.
In order to enable programmer support, you have to use the PROGRAMMER option (see Creating firmware images):
set(${TARGET_NAME}_PROGRAMMER programmer_id)
where programmer_id is the name of the programmer supported by the Arduino SDK.
Once you have enabled programmer support, two new targets are available in the build system:
- ${TARGET_NAME}-burn - burns the firmware image via the programmer
- ${TARGET_NAME}-burn-bootloader - burns the original Arduino bootloader image via the programmer
If you need to restore the original Arduino bootloader onto your Arduino, so that you can use the traditional way of uploading firmware images via the bootloader, use ${TARGET_NAME}-burn-bootloader to restore it.
For those developers who don't want any Arduino magic, but still want to utilize the hardware platform you are in luck. This section will outline the generate_avr_firmware() and generate_avr_library() commands, which enables you to compile sources for the given Arduino board.
No Arduino Core or Arduino libraries will get generated, this is for manual compilation of sources. These commands are for people that know what they are doing, or have done pure AVR development. People starting out, or just familiar with Arduino should not use these commands.
The generate_avr_firmware() command:
generate_avr_firmware(name
[BOARD board_id]
[SRCS src1 src2 ... srcN]
[HDRS hdr1 hdr2 ... hdrN]
[LIBS lib1 lib2 ... libN]
[PORT port]
[SERIAL serial_cmd]
[PROGRAMMER programmer_id]
[AFLAGS flags])
This will compile the sources for the specified Arduino board type.
The options:
| Name | Description | Required |
| BOARD | Board ID (such as uno, mega2560, ...) | REQUIRED |
| SRCS | Source files | REQUIRED |
| HDRS | Headers files (for project based build systems) | |
| LIBS | Libraries to link (sets up dependency tracking) | |
| BOARD | Board ID (such as uno, mega2560, ...) | REQUIRED |
| PORT | Serial port, for upload and serial targets (see Upload Firmware) | |
| SERIAL | Serial command for serial target (see Serial Terminal) | |
| PROGRAMMER | Programmer ID, enables programmer burning (see Programmers). | |
| AFLAGS | avrdude flags for target |
You can specify the options in two ways, either as the command arguments or as variables. When specifying the options as variables they must be named:
${TARGET_NAME}_${OPTION_NAME}
Where ${TARGET_NAME} is the name of you target and ${OPTION_NAME} is the name of the option.
The generate_avr_library() command:
generate_avr_library(name
[BOARD board_id]
[SRCS src1 src2 ... srcN]
[HDRS hdr1 hdr2 ... hdrN]
[LIBS lib1 lib2 ... libN])
This will compile a static library for the specified Arduino board type.
The options:
| Name | Description | Required |
| BOARD | Board ID (such as uno, mega2560, ...) | REQUIRED |
| SRCS | Source files | REQUIRED |
| HDRS | Headers files (for project based build systems) | |
| LIBS | Libraries to link (sets up dependency tracking) |
You can specify the options in two ways, either as the command arguments or as variables. When specifying the options as variables they must be named:
${TARGET_NAME}_${OPTION_NAME}
Where ${TARGET_NAME} is the name of you target and ${OPTION_NAME} is the name of the option.
The following options control how Arduino CMake is configured:
| Name | Description |
| ARDUINO_SDK_PATH | Full path to the Arduino SDK |
| ARDUINO_AVRDUDE_PROGRAM | Full path to avrdude programmer |
| ARDUINO_AVRDUDE_CONFIG_PATH | Full path to avrdude configuration file |
| ARDUINO_DEFAULT_BOARD | Default Arduino Board ID, when not specified. |
| ARDUINO_DEFAULT_PORT | Default Arduino port, when not specified. |
| ARDUINO_DEFAULT_SERIAL | Default Arduino Serial command, when not specified. |
| ARDUINO_DEFAULT_PROGRAMMER | Default Arduino Programmer ID, when not specified. |
To force a specific version of Arduino SDK, configure the project like so:
cmake -DARDUINO_SDK_PATH=/path/to/arduino_sdk ../path/to/sources
Note: You must create a new build system if you change ARDUINO_SDK_PATH.
When Arduino CMake is configured properly, these options are defined:
| Name | Description |
| ARDUINO_FOUND | Set to True when the Arduino SDK is detected and configured. |
| ARDUINO_SDK_VERSION | Full version of the Arduino SDK (ex: 1.0.0) |
| ARDUINO_SDK_VERSION_MAJOR | Major version of the Arduino SDK (ex: 1) |
| ARDUINO_SDK_VERSION_MINOR | Minor version of the Arduino SDK (ex: 0) |
| ARDUINO_SDK_VERSION_PATCH | Patch version of the Arduino SDK (ex: 0) |
During compilation, you can enable the following environment variables.
| Name | Description |
| VERBOSE | Enables verbose compilation, displays commands being executed. (Non empty value) |
| VERBOSE_SIZE | Enables full/verbose output from avr-size. (Non empty value) |
This section will outlines some of the additional miscellaneous functions available to the user.
print_board_list():
Print list of detected Arduino Boards.
print_programmer_list():
Print list of detected Programmers.
print_programmer_settings(PROGRAMMER):
PROGRAMMER - programmer id
Print the detected Programmer settings.
print_board_settings(BOARD_ID):
BOARD_ID - Board ID
Print the detected Arduino board settings.
register_hardware_platform(HARDWARE_PLATFORM_PATH):
HARDWARE_PLATFORM_PATH - Hardware platform path
Registers a
Hardware Platformpath. See: Arduino Platforms PRE 1.5 and Arduino Platforms 1.5.A Hardware Platform is a directory containing the following:
HARDWARE_PLATFORM_PATH/ |-- bootloaders/ |-- cores/ |-- variants/ |-- boards.txt `-- programmers.txtThis enables you to register new types of hardware platforms such as the Sagnuino, without having to copy the files into your Arduino SDK.
The
board.txtdescribes the target boards and bootloaders. Whileprogrammers.txtthe programmer defintions.A good example of a Hardware Platform is in the Arduino SDK:
${ARDUINO_SDK_PATH}/hardware/arduino/
Using Arduino CMake in your own project is simple, you just need a single directory called cmake. Just copy that entire directory into you project and you are set.
Copying the cmake directory, although simple is not the best solution. If you are using GIT for source code versioning, the best solution is using a submodule. The submodule gives you the power of updating to the latest version of Arduino CMake without any effort. To add a submodule do:
git submodule add git://github.com/queezythegreat/arduino-cmake.git arduino-cmake
Then just set the CMAKE_TOOLCHAIN_FILE variable:
set(CMAKE_TOOLCHAIN_FILE ${CMAKE_SOURCE_DIR}/arduino-cmake/cmake/ArduinoToolchain.cmake)
For more information on GIT submodules please read: GIT Book - Submodules
Running the Arduino SDK on Linux is a little bit more involved, because not everything is bundled with the SDK. The AVR GCC toolchain is not distributed alongside the Arduino SDK, so it has to be installed seperately.
To get Arduino CMake up and running follow these steps:
Install the following packages using your package manager:
gcc-avr- AVR GNU GCC compilerbinutils-avr- AVR binary toolsavr-libc- AVR C libraryavrdude- Firmware uploader
Install the Arduino SDK.
Depending on your distribution, the Arduino SDK may or may not be available.
If it is available please install it using your packages manager otherwise do:
- Download the Arduino SDK
- Extract it into
/usr/share
NOTE: Arduino version 0.19 or newer is required!
Install CMake:
- Using the package manager or
- Using the CMake installer
NOTE: CMake version 2.8 or newer is required!
On Linux the Arduino serial device is named as follows (where X is the device number):
/dev/ttyUSBX /dev/ttyACMX
Where /dev/ttyACMX is for the new Uno and Mega Arduino's, while /dev/ttyUSBX is for the old ones.
CMake configuration example:
set(${FIRMWARE_NAME}_PORT /dev/ttyUSB0)
On Linux a wide range on serial terminal are availabe. Here is a list of a couple:
minicompicocomgtktermscreen
The Arduino SDK, as on Windows, is self contained and has everything needed for building. To get started do the following:
Install the Arduino SDK
- Download Arduino SDK
- Copy
ArduinointoApplications - Install
FTDIUSBSerialDrviver*(for FTDI USB Serial)
Install CMake
Download CMake
Install
cmake-*.pkgNOTE: Make sure to click on `Install Command Line Links`
When specifying the serial port name on Mac OS X, use the following names (where XXX is a unique ID):
/dev/tty.usbmodemXXX /dev/tty.usbserialXXX
Where tty.usbmodemXXX is for new Uno and Mega Arduino's, while tty.usbserialXXX are the older ones.
CMake configuration example:
set(${FIRMWARE_NAME}_PORT /dev/tty.usbmodem1d11)
On Mac the easiest way to get a Serial Terminal is to use the screen terminal emulator. To start a screen serial session:
screen /dev/tty.usbmodemXXX
Where /dev/tty.usbmodemXXX is the terminal device. To exit press C-a C-\.
CMake configuration example:
set(${FIRMWARE_NAME}_SERIAL screen @SERIAL_PORT@)
On Windows the Arduino SDK is self contained and has everything needed for building. To setup the environment do the following:
Place the Arduino SDK either
- into Program Files, or
- onto the System Path
NOTE: Don't change the default Arduino SDK directory name, otherwise auto detection will no work properly!
Add to the System Path:
${ARDUINO_SDK_PATH}/hardware/tools/avr/utils/binInstall CMake 2.8
NOTE: Make sure you check the option to add CMake to the System Path.
Once installed, you can start using CMake the usual way, just make sure to chose either a MSYS Makefiles or Unix Makefiles type generator:
MSYS Makefiles = Generates MSYS makefiles.
Unix Makefiles = Generates standard UNIX makefiles.
CodeBlocks - Unix Makefiles = Generates CodeBlocks project files.
Eclipse CDT4 - Unix Makefiles
= Generates Eclipse CDT 4.0 project files.
If you want to use a MinGW Makefiles type generator, you must generate the build system the following way:
Remove
${ARDUINO_SDK_PATH}/hardware/tools/avr/utils/binfrom the System PathGenerate the build system using CMake with the following option set (either through the GUI or from the command line):
CMAKE_MAKE_PROGRAM=${ARDIUNO_SDK_PATH}/hardware/tools/avr/utils/bin/make.exeThen build the normal way
The reason for doing this is the MinGW generator cannot have the sh.exe binary on the System Path during generation, otherwise you get an error.
When specifying the serial port name on Windows, use the following names:
com1 com2 ... comN
CMake configuration example:
set(${FIRMWARE_NAME}_PORT com3)
Putty is a great multi-protocol terminal, which supports SSH, Telnet, Serial, and many more... The latest development snapshot supports command line options for launching a serial terminal, for example:
putty -serial COM3 -sercfg 9600,8,n,1,X
CMake configuration example (assuming putty is on the System Path):
set(${FIRMWARE_NAME}_SERIAL putty -serial @SERIAL_PORT@)
Putty - http://tartarus.org/~simon/putty-snapshots/x86/putty-installer.exe
Eclipse is a great IDE which has a lot of functionality and is much more powerful than the Arduino IDE. In order to use Eclipse you will need the following:
- Eclipse
- Eclipse CDT extension (for C/C++ development)
On most Linux distribution you can install Eclipse + CDT using your package manager, otherwise you can download the Eclipse IDE for C/C++ Developers bundle.
Once you have Eclipse, here is how to generate a project using CMake:
Create a build directory that is next to your source directory, like this:
build_directory/ source_directory/
Run CMake with the Eclipse CDT4 - Unix Makefiles generator, inside the build directory:
cd build_directory/ cmake -G"Eclipse CDT4 - Unix Makefiles" ../source_directory
Open Eclipse and import the project from the build directory.
- File > Import
- Select Existing Project into Workspace, and click Next
- Select Browse, and select the build directoy.
- Select the project in the Projects: list
- Click Finish
The following section will outline some solutions to common problems that you may encounter.
undefined reference to `__cxa_pure_virtual'
When linking you'r firmware image you may encounter this error on some systems. An easy fix is to add the following to your firmware source code:
extern "C" void __cxa_pure_virtual(void);
void __cxa_pure_virtual(void) { while(1); }
The contents of the __cxa_pure_virtual function can be any error handling code; this function will be called whenever a pure virtual function is called.
If you are working on Linux, and have avr-gcc >= 4.5 you might have a unpatched version gcc which has the C++ constructor bug. This bug affects the Atmega2560 when using classes which causes the Arduino firmware to crash.
If you encounter this problem either downgrade avr-gcc to 4.3 or rebuild gcc with the following patch:
--- gcc-4.5.1.orig/gcc/config/avr/libgcc.S 2009-05-23 17:16:07 +1000
+++ gcc-4.5.1/gcc/config/avr/libgcc.S 2010-08-12 09:38:05 +1000
@@ -802,7 +802,9 @@
mov_h r31, r29
mov_l r30, r28
out __RAMPZ__, r20
+ push r20
XCALL __tablejump_elpm__
+ pop r20
.L__do_global_ctors_start:
cpi r28, lo8(__ctors_start)
cpc r29, r17
@@ -843,7 +845,9 @@
mov_h r31, r29
mov_l r30, r28
out __RAMPZ__, r20
+ push r20
XCALL __tablejump_elpm__
+ pop r20
.L__do_global_dtors_start:
cpi r28, lo8(__dtors_end)
cpc r29, r17
When a Arduino library does not get detected automatically, it usually means CMake cannot find it (obvious).
One common reason why the library is not detected, is because the directory name of the library does not match the header. If I'm including a library header like so:
#include "my_library.h"
Based on this include, Arduino CMake is expecting to find a library that has a directory name my_libray. If the directory name does not match the header, it won't be consider a Arduino Library (see Arduino Libraries).
When a library being used is located in a non-standard location (not in the Arduino SDK or next to the firmware), then that directory must be registered. To register a non-standard directory containing Arduino libraries, use the following:
link_directories(path_to_directory_containing_libraries)
Remember to use this command before defining the firmware, which requires the library from that directory.
If you get the following error:
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.cpp:91:41: error: attempt to use poisoned "SIG_USART0_RECV" /usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.cpp:101:15: error: attempt to use poisoned "SIG_USART0_RECV" /usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.cpp:132:15: error: attempt to use poisoned "SIG_USART1_RECV" /usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.cpp:145:15: error: attempt to use poisoned "SIG_USART2_RECV" /usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.cpp:158:15: error: attempt to use poisoned "SIG_USART3_RECV"
You probably recently upgraded avr-libc to the latest version, which has deperecated the use of these symbols. There is a Arduino Patch which fixes these error, you can read more about this bug here: Arduino Bug ISSUE 955.
Here are some resources you might find useful in getting started.
- Arduino:
- Getting Started - Introduction to Arduino
- Playground - User contributed documentation and help
- Arduino Forums - Official forums
- Arduino Reference - Official reference manual