zx.star.is

TNFS browser for the ZX Spectrum.

Usage

• Browse files by using opqa or cursor keys.
• Select files by pressing enter.
• .sna or .tap files are detected automatically and mounted with the appropiate basic commands.
• You can inspect the source code by inspecting the basic listing (shift+spc, then K+enter).
• Boot into 128 or 48 basic by typing 1 or 4.
• Exit to a different TNFS server by typing X.
• Hint: press shift+enter to mount tape and boot into 128 basic. you can either load from there, go 48 or USR0.

Testing on ZX emulator

1. Launch es.pectrum emulator.
2. Enable Spectranet device on settings, if not already enabled.
3. Go to basic, type %fsconfig + ENTER. Hint: % is CTRL+5.
4. A -> 0 + ENTER -> zx.star.is + ENTER -> C -> D.
5. Reboot emulator F12. It should proceed into a custom menu similar to the image pictured above.

Testing on real hardware

• Tutorial: https://www.youtube.com/watch?v=PmLN2xcRgMw
• Hardware: https://www.bytedelight.com/?page_id=3515
• Firmware: https://github.com/spectrumero/spectranet
• Wiki: http://spectrum.alioth.net/doc/index.php/Main_Page
• Note: Spectranet device required.

License

Public domain.