SparkFun FM Tuner Basic Breakout - Si4703 (BOB-11083)
This breakout for the Silicon Laboratories Si4703 FM tuner chip is a little more stripped down than our FM Tuner Evaluation Board. If your project already has an amp and just needs a full-featured FM tuner, this is the board for you.
Note: If you are using a different microcontroller that is 5V, you will need to connect to the respective I2C pins, and match the logic levels. Make sure to add the 4-channel bi-directional logic level converter between SDIO, SCLK, RST, and GPIO2.
- /Firmware - Example code
- /Hardware - Eagle design files (.brd, .sch)
- /Libraries - Libraries for use with the
- /Production - Production panel files (.brd)
- Library - Arduino library for the Si4703.
- SparkFun Fritzing repo - Fritzing diagrams for SparkFun products.
- SparkFun 3D Model repo - 3D models of SparkFun products.
This product is open source!
The hardware is released under Creative Commons ShareAlike 4.0 International.
The code is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round!
Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.
Distributed as-is; no warranty is given.
- Your friends at SparkFun.