- GitHub.com account and git on your dev machine (Mac in my case...)
- GitHub.com registered public SSH key
- Supported target device, in my case a Raspberry Pi 2
- Empty Micro-SD card (for the resin.io device image)
- Sign up for resin.io
- Create a logical application and declare target device, in my case
helloworld1and Raspberry Pi 2 - Note that resin.io provides a git repo target that you use later to push your app
- Download the device image (in Raspberry Pi 2 case this is about 1.5 GB download)
- Note that you select wired or wi-fi (enabled) device image. For wi-fi there are options for SSID and network password (exact details specific to the device).
- Write the image to your empty Micro-SD (In my case I grabbed Pi-Filler for this, but can use Mac/Linux commands...)
- Insert card in your device, and power up.
- After a few minutes, your device should be connected to resin.io and show in the resin.io web console for your application.
Write your device app (in my case I just pull the Python/Flask sample)
/Users/tbeets/projects/learnResinio [tbeets@tbeets-mac] [16:50]
> git clone [email protected]:resin-projects/simple-server-python.git
Cloning into 'simple-server-python'...
Warning: Permanently added the RSA host key for IP address '192.30.252.128' to the list of known hosts.
remote: Counting objects: 52, done.
remote: Total 52 (delta 0), reused 0 (delta 0), pack-reused 52
Receiving objects: 100% (52/52), 704.78 KiB | 1.03 MiB/s, done.
Resolving deltas: 100% (20/20), done.
Checking connectivity... done.
/Users/tbeets/projects/learnResinio/simple-server-python [git::master] [tbeets@tbeets-mac] [18:31]
> ls
Dockerfile.template README.md img/ requirements.txt src/
/Users/tbeets/projects/learnResinio/simple-server-python [git::master] [tbeets@tbeets-mac] [19:08]
> cat Dockerfile.template
FROM resin/%%RESIN_MACHINE_NAME%%-python
MAINTAINER Shaun Mulligan <[email protected]>
#switch on systemd init system in container
ENV INITSYSTEM on
# pip install python deps from requirements.txt
# For caching until requirements.txt changes
COPY ./requirements.txt /requirements.txt
RUN pip install -r /requirements.txt
COPY . /usr/src/app
WORKDIR /usr/src/app
#run main.py when the container starts
CMD ["python","src/main.py"]
/Users/tbeets/projects/learnResinio/simple-server-python [git::master] [tbeets@tbeets-mac] [18:31]
> git remote add resin [email protected]:todd/helloworld1.git
/Users/tbeets/projects/learnResinio/simple-server-python [git::master] [tbeets@tbeets-mac] [18:36]
> git push resin master
The authenticity of host 'git.resin.io (54.165.162.194)' can't be established.
RSA key fingerprint is 14:bd:c0:8a:d5:c3:74:43:cd:2f:9e:f8:f5:e2:e2:a0.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'git.resin.io,54.165.162.194' (RSA) to the list of known hosts.
Counting objects: 52, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (27/27), done.
Writing objects: 100% (52/52), 704.78 KiB | 0 bytes/s, done.
Total 52 (delta 20), reused 52 (delta 20)
Starting build for todd/helloworld1, user todd
Building on 'local'
-----> Dockerfile template application detected
Step 0 : FROM resin/raspberrypi2-python
---> ae5f214d5c50
Step 1 : MAINTAINER Shaun Mulligan <[email protected]>
---> Running in c5203cbcca50
---> ca3e3835a2ec
Removing intermediate container c5203cbcca50
Step 2 : ENV INITSYSTEM on
---> Running in 04f0a3218c2b
---> 2e23440147cf
Removing intermediate container 04f0a3218c2b
Step 3 : COPY ./requirements.txt /requirements.txt
---> 17fdb7e70fb1
Removing intermediate container 2ac61755a2a3
Step 4 : RUN pip install -r /requirements.txt
---> Running in 0a32bc2f2228
Collecting Flask==0.10.1 (from -r /requirements.txt (line 1))
Downloading Flask-0.10.1.tar.gz (544kB)
Collecting Werkzeug>=0.7 (from Flask==0.10.1->-r /requirements.txt (line 1))
Downloading Werkzeug-0.11.3-py2.py3-none-any.whl (305kB)
Collecting Jinja2>=2.4 (from Flask==0.10.1->-r /requirements.txt (line 1))
Downloading Jinja2-2.8-py2.py3-none-any.whl (263kB)
Collecting itsdangerous>=0.21 (from Flask==0.10.1->-r /requirements.txt (line 1))
Downloading itsdangerous-0.24.tar.gz (46kB)
Collecting MarkupSafe (from Jinja2>=2.4->Flask==0.10.1->-r /requirements.txt (line 1))
Downloading MarkupSafe-0.23.tar.gz
Installing collected packages: Werkzeug, MarkupSafe, Jinja2, itsdangerous, Flask
Running setup.py install for MarkupSafe
Running setup.py install for itsdangerous
Running setup.py install for Flask
Successfully installed Flask-0.10.1 Jinja2-2.8 MarkupSafe-0.23 Werkzeug-0.11.3 itsdangerous-0.24
You are using pip version 7.1.2, however version 8.0.2 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
---> 309bfc983402
Removing intermediate container 0a32bc2f2228
Step 5 : COPY . /usr/src/app
---> 81046d6d976b
Removing intermediate container c1cafcbcd1bb
Step 6 : WORKDIR /usr/src/app
---> Running in 0b8640d17b57
---> 9996a097a8c0
Removing intermediate container 0b8640d17b57
Step 7 : CMD python src/main.py
---> Running in 40f57c722382
---> 70d5e92278f1
Removing intermediate container 40f57c722382
Successfully built 70d5e92278f1
-----> Image created successfully!
-----> Uploading image to registry...
Image 38d98048753e already pushed, skipping - 0% total
Image 6c38dfcb6ace already pushed, skipping - 0% total
Image 4533c733949a already pushed, skipping - 14% total
Image dc7d8102da8f already pushed, skipping - 14% total
Image e4c80cc4e667 already pushed, skipping - 14% total
Image d9e095f0fe59 already pushed, skipping - 14% total
Image 6906b07fe485 already pushed, skipping - 14% total
Image 18b9f417a970 already pushed, skipping - 14% total
Image 342c1e58ff47 already pushed, skipping - 14% total
Image 63e5ca9f7c4a already pushed, skipping - 14% total
Image 1cd73a394d44 already pushed, skipping - 14% total
Image 42338f999bb6 already pushed, skipping - 14% total
Image e786133579ce already pushed, skipping - 14% total
Image c0079ac125bd already pushed, skipping - 14% total
Image d3b5b28936bd already pushed, skipping - 14% total
Image 8be03e0c5f40 already pushed, skipping - 14% total
Image e208e9c97e5d already pushed, skipping - 14% total
Image e094cf9d9d33 already pushed, skipping - 21% total
Image 9a7c6239ea6d already pushed, skipping - 35% total
Image 294a8807f8b5 already pushed, skipping - 70% total
Image 995242e87f81 already pushed, skipping - 79% total
Image 4af867a0d4b0 already pushed, skipping - 79% total
Image 46111a6df515 already pushed, skipping - 79% total
Image a8d304998d4d already pushed, skipping - 79% total
Image c71c9eb9d144 already pushed, skipping - 79% total
Image 8ab1884c07af already pushed, skipping - 85% total
Image 2a01928e7c01 already pushed, skipping - 85% total
Image 0ebfd4c5a1f1 already pushed, skipping - 85% total
Image 57c09d308162 already pushed, skipping - 85% total
Image eb93d765627b already pushed, skipping - 87% total
Image cfd9eb53c85c already pushed, skipping - 98% total
Image 355456e7b249 already pushed, skipping - 98% total
Image 814e52faecfe already pushed, skipping - 98% total
Image d642607cc37c already pushed, skipping - 98% total
Image 871dd9ed46c0 already pushed, skipping - 98% total
Image 9c3900a93463 already pushed, skipping - 98% total
Image ae5f214d5c50 already pushed, skipping - 98% total
[==================================================>] 1.024 kB/1.024 kB - 98%
[==================================================>] 1.024 kB/1.024 kB - 98%
[==================================================>] 2.048 kB/2.048 kB - 98%
[=================================================> ] 5.947 MB/5.994 MB - 99%
[=================================================> ] 425.5 kB/429.6 kB - 100%
[==================================================>] 1.024 kB/1.024 kB - 100%
[==================================================>] 1.024 kB/1.024 kB - 100%
Image uploaded successfully!
Check your dashboard for device download progress: https://dashboard.resin.io/apps/42108/devices
Build took 54 seconds
\
\
\\
\\
>\/7
_.-(6' \
(=___._/` \
) \ |
/ / |
/ > /
j < _\
_.-' : ``.
\ r=._\ `.
<`\\_ \ .`-.
\ r-7 `-. ._ ' . `\
\`, `-.`7 7) )
\/ \| \' / `-._
|| .'
\\ (
>\ >
,.-' >.'
<.'_.''
<'
To [email protected]:todd/helloworld1.git
* [new branch] master -> master
After web console shows download complete, we test on our local LAN (note that bernie-wired is a local /etc/hosts alias for my wired Pi):
/Users/tbeets/projects/learnResinio/simple-server-python [git::master] [tbeets@tbeets-mac] [18:54]
> http http://bernie-wired
HTTP/1.0 200 OK
Content-Length: 12
Content-Type: text/html; charset=utf-8
Date: Thu, 04 Feb 2016 02:55:22 GMT
Server: Werkzeug/0.11.3 Python/2.7.11
Hello World!