♻️ Migrate FYSETC_MINI_12864_2_1

Co-Authored-By: ellensp <[email protected]>

Marlin/src/pins/esp32/pins_MKS_TINYBEE.h

@@ -171,32 +171,31 @@
   // MKS MINI12864 / LCD12864B. For MKS LCD12864A remove the RPK2 resistor!
 
   // Migrated to pins/lcd
-  #define LCD_RESET_PIN                     -1
+  #define LCD_RESET_PIN                       -1
+
+#elif ENABLED(FYSETC_MINI_12864_2_1)
+
+  // Migrated to pins/lcd
+
+  #if SD_CONNECTION_IS(ONBOARD)
+    #define FORCE_SOFT_SPI
+  #endif
+  #if ALL(MKS_MINI_12864_V3, HAS_MEDIA)
+    #define PAUSE_LCD_FOR_BUSY_SD
+  #endif
 
 #elif HAS_WIRED_LCD
+
   #define BEEPER_PIN                 EXP1_01_PIN
   #define LCD_PINS_EN                EXP1_03_PIN
   #define LCD_PINS_RS                EXP1_04_PIN
   #define BTN_ENC                    EXP1_02_PIN
   #define BTN_EN1                    EXP2_03_PIN
   #define BTN_EN2                    EXP2_05_PIN
 
-  #if ENABLED(FYSETC_MINI_12864_2_1)
-    // MKS_MINI_12864_V3, BTT_MINI_12864, FYSETC_MINI_12864_2_1, BEEZ_MINI_12864
-    #define DOGLCD_CS                EXP1_03_PIN
-    #define DOGLCD_A0                EXP1_04_PIN
-    #define LCD_RESET_PIN            EXP1_05_PIN
-    #define NEOPIXEL_PIN             EXP1_06_PIN
-    #if SD_CONNECTION_IS(ONBOARD)
-      #define FORCE_SOFT_SPI
-    #endif
-    #if ALL(MKS_MINI_12864_V3, HAS_MEDIA)
-      #define PAUSE_LCD_FOR_BUSY_SD
-    #endif
-  #else
-    #define LCD_PINS_D4              EXP1_05_PIN
-    #define BOARD_ST7920_DELAY_1              96
-    #define BOARD_ST7920_DELAY_2              48
-    #define BOARD_ST7920_DELAY_3             600
-  #endif
+  #define LCD_PINS_D4                EXP1_05_PIN
+  #define BOARD_ST7920_DELAY_1              96
+  #define BOARD_ST7920_DELAY_2              48
+  #define BOARD_ST7920_DELAY_3             600
+
 #endif // HAS_WIRED_LCD

Marlin/src/pins/lcd/FYSETC_MINI_12864.h

@@ -0,0 +1,120 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * pins/lcd/FYSETC_MINI_12864.h
+ * See https://wiki.fysetc.com/Mini12864_Panel
+ */
+
+/**
+ * NOTES:
+ *
+ * All these are the same with different backlight options.
+ *
+ * FYSETC_MINI_12864_X_X    // Type C/D/E/F. No tunable RGB Backlight by default
+ * FYSETC_MINI_12864_1_2    // Type C/D/E/F. Simple RGB Backlight (always on)
+ * FYSETC_MINI_12864_2_0    // Type A/B. Discreet RGB Backlight
+ * FYSETC_MINI_12864_2_1    // Type A/B. NeoPixel RGB Backlight
+ * FYSETC_GENERIC_12864_1_1 // Larger display with basic ON/OFF backlight
+ *
+ * NOTE: MKS_MINI_12864_V3 and BTT_MINI_12864_V1 are the same as FYSETC_MINI_12864_2_1 with plugs rotated 180 degrees
+ *
+ * Custom adapters are required for these boards:
+ *   pins_BTT_SKR_E3_DIP.h               ADAPTER_CUSTOM_E3_DIP_TFT
+ *   pins_BTT_SKR_MINI_E3_common.h       ADAPTER_CUSTOM_MINI_E3_TFT
+ *   pins_CREALITY_V4.h                  ADAPTER_CUSTOM_CREALITY_V4_DEBUG_HEADER
+ *   pins_BTT_SKR_MINI_E3_V3_0.h         ADAPTER_CUSTOM_E3_V3_NEO
+ *                                       ADAPTER_SKR_MINI_SCREEN
+ */
+
+// U8GLIB_MINI12864_2X_HAL : u8g_dev_uc1701_mini12864_HAL_sw_spi, u8g_dev_uc1701_mini12864_HAL_hw_spi
+
+// FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1, FYSETC_GENERIC_12864_1_1
+//  FYSETC_MINI_12864
+//  DOGLCD
+//   HAS_MARLINUI_U8GLIB
+//  IS_ULTIPANEL
+//   HAS_WIRED_LCD
+//    HAS_DISPLAY
+//     HAS_STATUS_MESSAGE
+//   IS_NEWPANEL
+//   HAS_MARLINUI_MENU
+//    HAS_MANUAL_MOVE_MENU
+//  LED_COLORS_REDUCE_GREEN
+
+/**
+ *   FYSETC Mini 12864 https://wiki.fysetc.com/Mini12864_Panel/
+ *
+ *   EXP1                                    EXP2
+ *
+ *   GND    GLED   LRST   LCS    BEEP        GND    CD     EN2    EN1    MISO
+ *    9      7      5      3      1           9      7      5      3      1
+ *   10      8     (6)     4      2          10      8     (6)     4      2
+ *   VCC    BLED   RLED   LRS    ENC         SCK    RST    MOSI   SDSS   SCK
+ *                 (DIN)
+ *
+ */
+
+#define BEEPER_PIN        LCD1_01_PIN
+
+#define BTN_ENC           LCD1_02_PIN
+#define BTN_EN1           LCD2_03_PIN
+#define BTN_EN2           LCD2_05_PIN
+
+#define DOGLCD_CS         LCD1_03_PIN
+#define DOGLCD_A0         LCD1_04_PIN
+
+#define DOGLCD_MISO       LCD2_01_PIN
+#define DOGLCD_SCK        LCD2_02_PIN
+#define DOGLCD_MOSI       LCD2_06_PIN
+
+#define LCD_RESET_PIN     LCD1_05_PIN
+#define KILL_PIN          LCD2_08_PIN
+
+#if ENABLED(FYSETC_MINI_12864_2_1)
+  #define LCD_NEOPIXEL_PIN LCD1_06_PIN
+#elif ANY(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+  #ifndef RGB_LED_R_PIN
+    #define RGB_LED_R_PIN LCD1_06_PIN
+  #endif
+  #ifndef RGB_LED_G_PIN
+    #define RGB_LED_G_PIN LCD1_07_PIN
+  #endif
+  #ifndef RGB_LED_B_PIN
+    #define RGB_LED_B_PIN LCD1_08_PIN
+  #endif
+#elif ENABLED(FYSETC_GENERIC_12864_1_1)
+  #define LCD_BACKLIGHT_PIN LCD1_07_PIN
+#endif
+
+#if HAS_MEDIA
+  #ifndef SDSS
+    #define SDSS          LCD2_04_PIN
+  #endif
+  #ifndef SD_DETECT_PIN
+    #define SD_DETECT_PIN LCD2_07_PIN
+  #endif
+#endif
+
+// Default LCD appearance
+#define LCD_CONTRAST_INIT 255