The latest release version may be downloaded here.
More recent builds may be downloaded from the CI under the "Build and package ROM" link (you must be logged into github to download the build artifacts). Please note, that those are development builds and may not be properly tested and thus contain imcomplete features or bugs, use them on your own risk.
This project is a homebrew enhancing the capabilities of the Game Boy Camera by allowing access to all the possible parameters of the sensor and improving the printing speed and the camera ergonomics in general. This project is compatible with all known models of Game Boy printer and Game Boy printer emulator. The project features Game Boy And Game Boy Color versions.
A special version compiled for the Mega Duck, also known as Cougar Boy is also available. It requires a special adapter that you can build from informations available here (soon).
This project requires a reflashable Game Boy Camera cart. PCB's and building instructions may be found in this project or in this more detailed fork. Camera modding requires advanced skill in soldering and is not recommended for beginners. GBxCart flasher from InsideGadget is the only known device compatible with camera flashcarts. A generic flashable cartridge is also necessary if you plan to remote control the camera via serial cable.
The save format used here is retro-compatible with any version of the Game Boy Camera rom. This means that you can switch between roms while keeping the same save without loosing your precious images and data. Technically all camera parameters are stored in various empty area of the camera working ram. They do not interfere with a regular camera rom as all checksums are systematically verified.
Photo! is also compatible with mGBA, BGB, SameBoy and PizzaBoy among other non yet tested emulators.
(Credit: Raphaël BOICHOT)
Example of use: Photo! working on a GB Boy Colour and remotely controlled from a Game Boy Color with a serial cable.
The repo contains two sets of roms. One set is compiled for DMG Game boy and Game Boy Pocket and basically features same slow transfer rate and a default "color" palette, as the original camera. The set compiled for Game Boy Color is able to feature Double Speed Mode, very high baudrate transfer mode and features several palettes. The two sets come with a remote control rom allowing to use another Game Boy as controller via the serial cable. You can flash the remote control rom on any flashable cart, it will be compatible.
The main hub brings you to the 5 main menus by pressing START after boot. You can skip it and going directly to Camera Mode by pressing A/B/SELECT.
- The Camera mode is where you take photos. It features 3 different mode for image capturing (see next section).
- The Gallery is your main image viewer/printer/eraser, dealing with images stored into ram. It features the same options as the Gallery of the Game Boy Camera. It is natively limited to 30 images.
- The Flash storage is a local mass storage system for images. Photo! is a 128kB rom and the MAC-GBD allows dealing with 1MB roms. All space after the 128kB of rom are writable by Photo! to store camera rolls. It allows storing 7 rolls of 30 images into flash memory, increasing the total number of images stored in Photo! to 240 (30 in ram, 210 in flash memory).
- The Settings menu features general parameters like palettes, Double Speed Mode, SGB borders, etc.
- The Credits features... the credits to the Photo! authors, artists, coders, debuggers.
The camera mode was created to propose many more features than a regular camera like infinite time-lapse, ultra-fast transmission, full manual mode, support of third party devices, etc. It was polished by people passionate by the Game Boy Camera.
- The Auto Mode is a mode that mimics the behavior of the stock Game Boy Camera, it modifies automatically the Exposure time, and sets the Gain, Sensor Voltage Out and Edge enhancement mode according to rules assessed by datalogging the MAC-GBD/sensor protocol and adapting them for this particular rom. All other camera registers used are fixed.
- The Assisted Mode uses the same strategy than Auto Mode with a manual setting of the exposure time. Press START to briefly activate the Auto Mode and lock exposure in the closest best position.
- The Manual Mode allows modifying all the parameters of the camera sensor that can be sent to the MAC-GBD. Glitches in perspective !
- A Button is the most simple action: press A once to get an Action.
- Timer launch a remote timer between 1 and 99 seconds and trigger an Action.
- Repeat allows triggering an Action repetitively, it is cumulative with Timer.
- AEB mode (for Automatic Exposure Bracketing) is an automatic burst mode were each image has a different exposure. You can choose the number of Steps (for example 14 steps means 14 images gradually under-exposed + 14 images gradually over-exposed + a central image, so 29 images taken in total) and the maximal possible Range possible in EV (indicated here for 29 images). The more you take images, the farther it goes in EV. Images can be processed together to make and HDR image (High Definition Range) by using the pico-gb-printer, the Game Boy Camera Gallery or the GB Camera Android Manager.
Timer, Repeat and AEB mode can be cancelled by pressing B button.
- Save just saves image in one of the 30 memory slots of the Camera save ram. If memory is full, it will play an error sound but continues to loop.
- Print sends the image with the chosen border directly to the printer without saving.
- Save & Print cumulates the two features but continues to print if the memory slots are all occupied.
- Transfer allows fast transmission of one image to the pico-gb-printer.
The Transfer protocol is very similar to standard printing. Only two packets are used, and the Game Boy does not expect receiving anything in response, we just send the raw image data as quick as possible. First, the Game Boy sends the standard printer INIT packet, and then sends the new 0x10 packet that is the same as DATA, but the data length is always 3584 bytes (16x14 tiles) and CRC bytes are always 0. On CGB the transfer rate is 32KB/s, on the DMG the transfer rate is 1KB/s.
- Transfer REC allows continuous transmission to the pico-gb-printer.
- Save & Transfer allows fast transmission of one image to the pico-gb-printer and saving to a memory slot.
- Save to SD is a planned feature, not yet implemented.
- Pic'n'rec allows recording one picture on the InsideGadget's Pic'n'Rec device. This action is not compatible with the Double Speed Mode.
- Pic'n'rec REC allows continuous transmission to InsideGadget's Pic'n'Rec device. This action is not compatible with the Double Speed Mode.
- Allows varying the area of image where exposure is calculated in Auto Mode. Can be centred, left, right, top or bottom.
- Allows to come back to factory settings, in particular if situation is becoming messy in Manual Mode.
- Gives access to custom dithering patterns cooked by some Game Boy Camera artists.
- Gives access the owner informations entered in the save via the regular camera.
The Gallery acts as the regular camera gallery but proposes batch image erase/unerase, displaying the image parameters and many printing options compatible with basically all the printer emulators available on the market. It of course can print on the original one !
- Info displays a thumbnail and the camera registers used. It allows printing these informations too.
- Print prints the current displayed image with the chosen border at a clock frequency of 8 kHz (1kB/s) or 256 kHz (32 kB/s) in Fast Printing mode (GBC only).
- Print All prints all the images in memory with the chosen border at a clock frequency of 8 kHz (1kB/s) or 256 kHz (32 kB/s) in Fast Printing mode (GBC only).
- Transfer prints the current displayed image without border at a clock frequency of 256 kHz (32kB/s) by default. This mode is supported by the pico-gb-printer. Compatible with Game Boy Color only !
- Transfer All prints all the images in memory without border and with a clock frequency of 256 kHz (32kB/s). This mode is supported by the pico-gb-printer. Compatible with Game Boy Color only !
- Delete declares the memory slot of the displayed image as free (without erasing data).
- Delete All declares all the memory slots as free (without erasing data).
- Undelete All declares all the memory slots as containing an image (whatever the slots content).
You can access a thumbnail viewer by pressing A when viewing an image. It allows batch selecting, erasing, printing and transfering images.
The flash storage of images is a unique feature from Photo! It allows dumping the whole ram (a "roll") to dedicated areas (the "slots") in the flash memory after the 128 kB of rom. It is intended to be used as film storage in case you do not have a printer with you. 7 storage slots of 30 images capacity are available in total. In the main menu, just choosing a full slot by pushing A allows browsing, printing, restoring to ram and transfering its images. The Game Boy Camera Gallery and the GB Camera Android Manager are able to directly get the images from a rom dump without moving them into ram. The pico-gb-printer is also able to get a roll directly without moving it to ram.
- Save roll to slot is the action of dumping the whole ram (roll) to a flash memory slot. It does not erase the pictures from ram.
- Move roll to slot do the same as Save roll to slot but it wipes all images from ram.
- Load from slot moves all the images contained in one slected slot to the sram. Beware, it wipes all the preceding images on ram !
- Erase slot well, erases a selected slot. Image are still recoverable with a dedicated tool in case of mistake.
- Print slot sends the whole roll in slot to any GB printer compatible device.
- Transfer slot sends the whole roll in slot to the pico-gb-printer at high baudrate. Compatible with Game Boy Color only !
- Clear camera roll erases the current roll (the ram). So Save roll to slot + Clear roll = Move roll to slot.
From a particular image in a roll, you can restore it, Print it or Transfer it without restoring the whole roll.
Some fancy general parameters like palette, Super Game Boy borders, regular and wild borders, GBA SP mode, overclocking, etc.
- Frame allows selecting no frame, normal frame or wild frames. Made by passionate pixel artists. Try'm all !
- Show screen grid displays crosses following the rule of thirds.
- Save confirmation adds or removes the double A input to save an image. Without save confirmation, camera acts like a burst mode. With save confirmation, like a real Game Boy Camera.
- Quick Boot shunts any boot screen and drive you immediately to the Camera mode. Ideal for sneak attack !
- Flip live image reverses the screen so that image appears in correct orientation when using a GBA SP, without the need for any additionnal device.
- Display exposure indicates the exposure time of the sensor in Auto mode.
- Cart type lets you select wether you are using an IG Pic'nred IAO or just any other generic flashcart (non IAO). If you don't know, just use generic.
- Palette proposes a choice of fancy palettes for the Game Boy Color and Game Boy Advance.
- Fast printing allows switching all print mode from 8 kHz (1 kB/s) to 256 kHz (32 kB/s) by default. Compatible witn Game Boy Color only !. This mode is currently supported by the pico-gb-printer and the BitBoy.
- IR remote enables using the IR port to trigger image capture. Any IR emitting device (TV remote control, other Game Boy Color, IR LED) does the job !
- Double speed enables the Game Boy Color Double Speed Mode where everything goes twice faster (internal clock, printing, screen refreshing, inputs, etc.). This mode draws more current, avoid this when using a modded Game Boy Pocket. This mode also drives the sensor twice faster, so exposure times are all divided by 2. Important note: the Double Speed Mode is not reliably supported by the Pic'n'rec REC at the moment.
- Enable DMA improves live view and refresh rate in Game Boy Color only.
- Alt. SGB borders allows switching between two Super Game Boy borders. Compatible with PAL and NTSC Super NES !
The Mitsubishi M64282FP artificial retina is one of the first mass produced CMOS light sensor. This kind of sensor is known for its good behavior in low light conditions and very low power consumption. Basically each pixel of the sensor translates the quantity of photons received during a given exposure time into a voltage. The sensor is able to perform some basic arithmetics on the voltage values before transfering them to an analog output (inversion, offsetting, 2D operations, multiplication, etc.). This sensor contains 128x128 pixels but only 123 lines return image information as the first 5 lines (at the bottom of an image) are always stuck at the saturation voltage, even in total darkness. The sensor documentation is notorious for being rushed and some additional informations can be deduced from the less rushed datasheet of the Mitsubishi M64283FP sensor which is a pin compatible close relative of the Game Boy Camera sensor.
The M64282FP working parameters are set by 8 bytes (plus their 3-bits addresses) containing various registers. The MAC-GBD itself, mapper of the Game Boy Camera, can only receive 5 bytes of data to tune the sensor so 3 equivalent-bytes of data are not modifiable on the Game Boy Camera (more precisely P, M and X, 3x8 bits, registers also called Filtering Kernels are never modified). The mapping between sensor registers and MAC-GBD registers is given as comment in the project code. Here is a detailed description of the registers that can be modified:
- The Exposure Time (registers C, 16 bits) is the time that each pixel of the sensor will receive photons and convert the integral photon quantity to voltage. The longer the exposure time, the higher the output voltage, the higher the signal to noise ratio, but the higher the motion blur. Sensor can saturate for too long exposure time/too high flux of photons. This sensor allows exposure time from 16 µseconds to 1048 mseconds. Exposure times below 256 µseconds lead to strong vertical artifacts. Using varying exposure time creates vertical (low exposure times) and horizontal (high exposure times) artifacts which are intrinsic to the sensor. The total voltage range between dark and saturated sensor is about 1.5 volts.
- The Sensor Gain (register G, 5 bits) is a multiplier applied between the quantity of photons received and the output voltage. To make an analogy with film camera, gain is similar to the ISOs of the film. However calculating the real corresponding ISOs for each gain value is out of reach with the current documentation of the sensor. Like film cameras, high gains (ISOs) and low exposure times gives noisy images, low gains (ISOs) and high exposure times gives smooth images. The gains used in the Game Boy camera and Photo! Automatic Mode vary very little compared to what the sensor is able to in Manual Mode.
- The Sensor Voltage Out (register O, 6 bits) is a fine voltage bias added to register V (see next). It allows increasing the sensor dynamic. Basically this bias is adjusted so that the image brightness during transition between sets of registers is seamless to the eye. The exact strategy used by the Game Boy Camera to fine tune this register during calibration is currently unknown. Photo! uses its own set of O register tuned to provide the most pleasant user experience.
- The Sensor Voltage Reference (register V, 3 bits) is a crude voltage bias applied to the output. It is never modified by the Game Boy Camera (and set by default to 1.5 volts). It typically allows to have a match between the min/max output voltage and the min/max input voltage allowed by the external ADC converter of the MAC-GBD. The M64282FP is able to force the voltage reading of sensor in the dark to be close to (but never equal to) the Sensor Voltage Reference by using register Z.
- The Inverse Output (register I, 1 bit) performs an hardware negative image by flipping the voltage scale.
- The Edge enhancement is performed by playing on the Sensor Edge Operation (register VH, 2 bits), the Sensor Edge Ratio (register E, 4 bits) and the Sensor Edge Exclusive (register N, 1 bit). It drastically improves the sharpness of the sensor image which is natively very soft without this feature. The Contrast is not only controlled by the sensor itself (the gain modifies the contrast) but also actively by the MAC-GBD by sending dithering matrices derived from Bayer matrices.
The packet format is very simple and consist of one byte.
0bS0IPXXXX
S - stop, I - identifier, P - parity, XXXX - 4 Button or D-Pad bits
Stop bit is always 1.
Identifier is 1 for upper (buttons) and 0 for lower (D-Pad)
Parity bit is 1 when the count of 1's in XXXX bits is odd, 0 when even.
Sender is a master device for the game boy.
Download GBDK-2020 from here under the GBDK Build and Package link and unzip it into the desired directory, for example C:/GBDK
Download Cygwin built for Windows from here. Install it with the additional make package from Devel category. If you encounter strange errors when compiling or make command is not recognized, get make.exe from the source site and copy paste it in /bin folder of Cygwin.
Download and install Python 3 built for Windows from here. Use the advanced installation options to add pip and environment variables (both are mandatory).
Then install Pillow and wave libraries:
python -m pip install --upgrade Pillow
python -m pip install --upgrade wave
Download and install Git built for Windows from here.
Now from the Cygwin terminal, clone this git repository to its desired destination (default is /home/USER), but may be any:
git clone https://github.com/untoxa/gb-photo
Set the GBDK_HOME environment variable which targets your GBDK-2020 folder. Best is to stay with the default GBDK_HOME = "C:/GBDK/"
Run make from the Cygwin terminal in the project folder containing the Makefile:
make
Your roms will be in ./build folders, enjoy !
(Credit: Raphaël BOICHOT)
- Mitsubishi M64282FP Sensor Datasheet
- Mitsubishi M64283FP Sensor Datasheet
- Game Boy Pan Docs
- AntonioND for the outstanding Documentation regarding the camera's sensor / PDF
- Andreas Hahn - original idea.
- Toxa lead developer.
- @rembrandx as well as NeoRame and 2bitpit for the logo/splashcreen/artworks. THX Hatch for your frames and the permission to use and change your graphics (Zebra and PCB)
- Raphaël Boichot for the in-depth analysis of the Game Boy Camera's RAM structure and tuning the auto-exposure algorithm.
- Tronimal for the original SFX effects.
- Cristofer Cruz for debugging and feature ideas.
- bbbbbr for support in programming.
- Christian Reinbacher for the print function and general help with some C concepts.
- Alex (insidegadgets) for figuring out the flickering issue and more.
- All the folks from Game Boy Gamera Club Discord for their support and ideas.