plugwise-rust

This crate implements a part of the Plugwise Circle and Plugwise Circle+ protocol (tested against 2010 firmware). It still requires the official tooling to configure and to link the plugs. This library supports the following operations:

• switch a Circle on or off;
• retrieve the relay status of a Circle;
• actual power usage of a Circle (in Watts);
• power usage over time (retrieved per hour in kWh);
• set clock of a Circle;
• get actual clock of a Circle.

This library is inspired on a Python implemention which was based on the analysis of the protocol by Maarten Damen.

This crate is tested against Linux, but since this crate is based on serial-rs crate, it is expected this crate also works on Windows and Mac OS X.

extern crate plugwise;

fn main() {
    // Connect to a plugwise device
    let serial = plugwise::plugwise(plugwise::Device::Serial("/dev/ttyUSB0")).unwrap();
    // create a Circle (replace MAC address)
    let circle = serial.create_circle(0x01234567890ABCDEF).unwrap();
    // switch the Circle on
    circle.switch_on().unwrap();
}