Rename c2s_state_timeout option to state_timeout

doc/listeners/listen-c2s.md

@@ -30,10 +30,10 @@ The value of the access rule needs to be either the shaper name or the string `"
 
 Maximum number of open connections. This is a *soft limit* according to the [Ranch](https://ninenines.eu/docs/en/ranch/2.1/manual/ranch) documentation.
 
-### `listen.c2s.c2s_state_timeout`
+### `listen.c2s.state_timeout`
 * **Syntax:** non-negative integer or the string `"infinity"`
 * **Default:** `5000`
-* **Example:** `c2s_state_timeout = 10_000`
+* **Example:** `state_timeout = 10_000`
 
 Timeout value (in milliseconds) used by the C2S state machine when waiting for the connecting client to respond during stream negotiation and SASL authentication. After the timeout the server responds with the `connection-timeout` stream error and closes the connection.
 

doc/listeners/listen-http.md

@@ -83,11 +83,11 @@ Maximum allowed incoming stanza size in bytes.
 
 ### `listen.http.handlers.mod_websockets.c2s_state_timeout`
 
-Same as the [C2S option](listen-c2s.md#listenc2sc2s_state_timeout)
+Same as the [C2S option](listen-c2s.md#listenc2sstate_timeout).
 
 ### `listen.http.handlers.mod_websockets.backwards_compatible_session`
 
-Same as the [C2S option](listen-c2s.md#listenc2sbackwards_compatible_session)
+Same as the [C2S option](listen-c2s.md#listenc2sbackwards_compatible_session).
 
 ## Handler types: GraphQL API - `mongoose_graphql_handler`
 

doc/migrations/6.0.0_6.1.0.md

@@ -6,7 +6,7 @@ With the new implementation of the client-to-server (C2S) state machine, `mongoo
 * Support for [`listen.http.handlers.mod_websockets.service`] has been removed, the component connection over WebSockets did not correspond to any XEP/RFC, and neither it was properly described anywhere in the MIM documentation. It was present in the default configuration file, and **you need to delete it** from your listener configuration unless you have already done so.
 * The `max_fsm_queue` option is no longer supported for C2S listeners. It is incompatible with the new `gen_statem` state machine, and if you need to limit incoming traffic, you should use [traffic shapers](../../configuration/shaper) instead. You need to remove this option from your C2S configuration if you are using it.
 * The default value of the [`backlog`](../configuration/listen.md#listenbacklog) option for all XMPP listeners has been increased from 100 to 1024 for performance reasons.
-* You might be interested in the new C2S listener options: [`max_connections`](../listeners/listen-c2s.md#listenc2smax_connections), [`c2s_state_timeout`](../listeners/listen-c2s.md#listenc2sc2s_state_timeout), [`reuse_port`](../listeners/listen-c2s.md#listenc2sreuse_port) and [`backwards_compatible_session`](../listeners/listen-c2s.md#listenc2sbackwards_compatible_session). The first two options can be set for [websockets](../listeners/listen-http.md#handler-types-websockets-mod_websockets) as well.
+* You might be interested in the new C2S listener options: [`max_connections`](../listeners/listen-c2s.md#listenc2smax_connections), [`c2s_state_timeout`](../listeners/listen-c2s.md#listenc2sstate_timeout), [`reuse_port`](../listeners/listen-c2s.md#listenc2sreuse_port) and [`backwards_compatible_session`](../listeners/listen-c2s.md#listenc2sbackwards_compatible_session). The first two options can be set for [websockets](../listeners/listen-http.md#handler-types-websockets-mod_websockets) as well.
 
 ## Module configuration
 

doc/migrations/6.2.1_x.x.x.md

@@ -2,3 +2,7 @@
 
 Hook names have been unified by removing the `_hook` prefix from the few hooks which used it,
 e.g. `offline_message_hook` is now called `offline_message`. This change affects the hook metric names as well.
+
+## Listener configuration
+
+`listen.c2s.c2s_state_timeout` option has been renamed to [listen.c2s.state_timeout](../listeners/listen-c2s.md#listenc2sstate_timeout).

src/c2s/mongoose_c2s.erl

@@ -62,7 +62,7 @@
 -type listener_opts() :: #{shaper := atom(),
                            max_stanza_size := non_neg_integer(),
                            backwards_compatible_session := boolean(),
-                           c2s_state_timeout := non_neg_integer(),
+                           state_timeout := non_neg_integer(),
                            port := inet:port_number(),
                            ip_tuple := inet:ip_address(),
                            proto := tcp,
@@ -1027,7 +1027,7 @@ send_xml(#c2s_data{socket = Socket}, XmlElements) when is_list(XmlElements) ->
 
 state_timeout(#c2s_data{listener_opts = LOpts}) ->
     state_timeout(LOpts);
-state_timeout(#{c2s_state_timeout := Timeout}) ->
+state_timeout(#{state_timeout := Timeout}) ->
     {state_timeout, Timeout, state_timeout_termination}.
 
 -spec replace_resource(data(), binary()) -> data().

src/config/mongoose_config_spec.erl

@@ -301,7 +301,7 @@ xmpp_listener_extra(<<"c2s">>) ->
                                                validate = non_empty},
                        <<"max_connections">> => #option{type = int_or_infinity,
                                                         validate = positive},
-                       <<"c2s_state_timeout">> => #option{type = int_or_infinity,
+                       <<"state_timeout">> => #option{type = int_or_infinity,
                                                           validate = non_negative},
                        <<"reuse_port">> => #option{type = boolean},
                        <<"backwards_compatible_session">> => #option{type = boolean},
@@ -313,7 +313,7 @@ xmpp_listener_extra(<<"c2s">>) ->
              defaults = #{<<"access">> => all,
                           <<"shaper">> => none,
                           <<"max_connections">> => infinity,
-                          <<"c2s_state_timeout">> => 5000,
+                          <<"state_timeout">> => 5000,
                           <<"reuse_port">> => false,
                           <<"backwards_compatible_session">> => true}
             };

src/mod_bosh_socket.erl

@@ -202,7 +202,7 @@ init([{HostType, Sid, Peer, PeerCert, ListenerOpts}]) ->
                             xml_socket => true,
                             max_stanza_size => 0,
                             hibernate_after => 0,
-                            c2s_state_timeout => 5000,
+                            state_timeout => 5000,
                             backwards_compatible_session => true,
                             proto => tcp},
     {ok, C2SPid} = mongoose_c2s:start({?MODULE, BoshSocket, C2SOpts}, []),

src/mod_websockets.erl

@@ -211,7 +211,7 @@ maybe_start_fsm([#xmlel{ name = <<"open">> }],
         max_stanza_size => 0,
         xml_socket => true,
         hibernate_after => 0,
-        c2s_state_timeout => StateTimeout,
+        state_timeout => StateTimeout,
         backwards_compatible_session => BackwardsCompatible,
         port => Port, ip_tuple => IPTuple, proto => tcp},
     do_start_fsm(Opts, State);

test/common/config_parser_helper.erl

@@ -1128,7 +1128,7 @@ default_config([listen, http, tls]) ->
 default_config([listen, c2s]) ->
     (common_xmpp_listener_config())#{module => mongoose_c2s_listener,
                                      max_connections => infinity,
-                                     c2s_state_timeout => 5000,
+                                     state_timeout => 5000,
                                      reuse_port => false,
                                      backwards_compatible_session => true,
                                      access => all,