Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
* Update FW: report exposure + iso too in ImgFrame for RGB, (note: lens position may be reported one frame in advance), fix black image when initial manual exposure was set with other controls, fix switching from auto to manual exposure causing the lens to jump to zero (note: the lens is directly set now with manual focus, bypassing 3A) * CameraControl setExternalTrigger: add numFramesDiscard param * CameraControl: add `setManualWhiteBalance(colorTemperatureK)` * Update FW: reduce ColorCamera still pool: 4 -> 1 frame * Update FW: support for up to 3x IMX378/IMX477 or 3x OV9782 color cameras. Note: configs for Left and Right sockets must be identical for now * Fix FW, support for multiple IMX378/477 * Update FW (IMX214 multiple resolutions), add more camera sockets * Update FW: CAM-D (4th socket) tested, AR0234 support. Note: if AR0234 sensors are used, cannot be combined with other types at the moment (due to tuning blobs in use) * Update FW: changes for IMX214/OV7251, other fixes * Update FW: fix ColorCamera `preview`/`video`/`still` when multiple cameras use these outputs * Update FW: change SIPP mem alloc to allow 4x ColorCamera to operate at the same time * Update FW: StereoDepth: fix RGB alignment when running at calib resolution (OAK-D with 800_P or OAK-D-Lite) * Update FW: fix for IMX378 still output at 12MP * Update FW: OV9282/9782 img orientation per camera, fix sync mode * Update FW: - support for camera modules with IMX380 sensor id, reusing IMX378 driver (some Arducam IMX577(?)) - soft-reset the sensor before config, to fix streaming with some Arducam modules * Update FW: IMX577 proper support (0577 sensor ID) * CameraControl: add setAutoFocusLensRange * Add `CameraControl::setFrameSyncMode`, controlling the FSIN pin I/O and camera sync behavior. Implemented for OV9282/OV9782 for now. Note: if one camera sets it to OUTPUT, and other(s) to INPUT, the hardware sync will work, but currently there's one frame de-sync in the sequence numbers (first frame is lost from the 'slave' cameras). This will be fixed * changed spdlog visibility * Add Device::getConnectedCameraProperties * Add new predefined resolutions for ColorCamera: THE_1200_P, THE_13_MP * Update FW: configurable FPS and fix enumeration issues with AR0234 * Added some getters to CameraControl and modified to use chrono where possible * Update FW: populate `CameraProperties::hasAutofocus` * OV5645 and 5MP resolution support * Update FW: fixes for multiple IMX378/477 * Update FW: fixes for OV9282/9782 on CAM-D, fix stereo rectified frame type for color * Update FW: allow `StereoDepth` to work with `ColorCamera`s, without having to call `StereoDepth::setInputResolution` * Add dot-projector/flood-illuminator brightness control for OAK-D-Pro-W, fix OV9782 slow AE due to missing AF * Allow using AR0234/OV5645 (but at degraded image quality) with other sensors enabled at the same time * Update FW with multiple fixes: - properly handle manual/auto focus with multiple cameras - fix potential init failure with same sensors (IMX378/477/214 / AR0234 / OV5645) on Left and Right sockets - fix sensor name reporting for AR0234 / IMX378/380/477/577 * Fix CI build (not matching bootloader-shared commits) * Script: add optional name parameter to `setScriptPath`, might come handy if the path is long, to have a shorter identifier * ColorCamera/MonoCamera: add `frameEvent` output, to be used for IR control, etc. * Update FW: FSYNC for IMX378 * Update FW, add initial support for IMX582/IMX586 * Updates for IMX582 - full 48MP res, temporarily center cropped (5312x6000 out of 8000x6000) * CameraControl: add STROBE MX-GPIO control, applicable for ext trig mode. AR0234 ext trig: - `cam[c].initialControl.setExternalTrigger(1, 0)` for snapshot mode (exposure+readout following immediately after trigger) - `cam[c].initialControl.setFrameSyncMode(dai.CameraControl.FrameSyncMode.INPUT)` for multiple devices sync (frame time is aligned, exposure could be different per device) Note: sensor trigger pin reacts on rising edge signal, and keeping the line high will cause repeated triggering. * Pipeline: add `setImageManipCmxSizeAdjust` * FW: fixes for 48MP camera, FW build for previous commits * Fix ColorCamera::getSensorCrop calculation for AUTO, was returning zero * WIP - flashUserBootloader * Updated Bootloader and added example * Added monitor thread for DeviceBootloader * Added explicit isUserBootloader call * Updated Bootloader for better User Bootloader support * MonoCamera: add frame pool size config API * Removed device_information and multi_roi from tests * Updated FW with ImageManip dynamic memory allocation * Disabled LATEX generation for docs * Added Warp node * Applied style * Set Yolo default iou threshold to 0.5 * Exposed Bootloader version available when booting a device in bootloader state * [Warp] Exposed HW engines used and interpolation * ImgFrame: add `getColorTemperature`. FW: fix exp/iso report for MonoCamera * CameraControl: update API docs, specify some defaults * Rename CameraProperties -> CameraFeatures * Added a sign cast to max user bootloader size check * Revert "Pipeline: add `setImageManipCmxSizeAdjust`" This reverts commit 591a98b. * Fix typo and add calibration_factory_reset example * Don't use the example as a part of the testing suite Co-authored-by: TheMarpe <[email protected]> * DEPTHAI_DEBUG=1 env var to enable `logDevicePrints`, ColorCamera: THE_12P0_MP, THE_5312X6000 * Update FW, shared: clangformat * `make clangformat`: calibration_factory_reset.cpp, depthai-shared, FW: increase an internal queue size for frameEvent * Exposed Timesync configurability * Docs fixes * Add support for yolov6r2 parsing * Expand spatial image detections with original config * Update CPP examples * Add getTimestamp and getTimestampDevice getter to IMU packets * Update IMU examples * Add THE_1200_P for AR0234 MonoCamera * Several FW updates: - !!! For all sockets/cameras to be scanned, the EEPROM calib data boardName/productName should contain "FFC" or an FFC-related board name: 1090/2090/2088. Otherwise the behavior is to scan only for standard OAK devices sockets/cameras - Some more checks for the LCM48 (on MAX) supported resolutions - Fixes for RGB-mono SW-sync for standard OAK-D / OAK-D-Lite camera configs - AR0234 monochrome support, however needs an OV9282 enabled at the same time for now * Color/MonoCamera: handle some more cases for newly added resolutions/sockets * Update shared/FW after merge, fix error log printed for MonoCamera AUTO socket * Closes: #355 * Bump version to 2.18.0 * Updated FW with some Color/MonoCamera fixes * stability test * Update FW: - fix for high system load crash, especially on PoE devices - for for OV9282 as MonoCamera on RGB/CAM_A socket * FW: OV9282 720p/800p max FPS: 60 -> 120 * stability test * Added a convinience setTimesync function * Added isUserBootloaderSupported to DeviceBootloader * Updated XLink with Windows improvements when scanning for already booted USB devices * Updated FW with device time reset on boot * Bump to v2.19.0 * Improved wording on unavailable devices * Fix yolo v5 decoding when there is a single class * FW: fixes for certain OV9782 and OV9282 permutations/configs, fix for OV9782/OV9282 alone failing on RGB/CAM_A socket * Update CI to Node16 compatible actions * Update FW: fix image size when decimation filter is enabled * Stability test - limit FPS (#633) * Print CPU usage * Limit the FPS so POE devices aren't maxed out * Increase FPS * Reverse changes to the system logger example Co-authored-by: TheMarpe <[email protected]> Co-authored-by: Matevz Morato <[email protected]> * Added getProductName * Added ids to IO for trace events * Modified pipeline schema dump to happen on trace log level as well * Renamed to getDeviceName and added some legacy handling * Updated FW with productName as protected field and ImageManip behavior revert * Updated style * Added IR driver support for new OAK-FFC 4P * FW: bugfix for device bootup with default static IP * OAK-FFC 4P R5M1E5 IR/Dot support * Bump to v2.19.1 * Added EepromError exception class and improved exception handling in calibration related methods * Increased limit on DeviceBootloader monitor timeout * Fixed check for user-provided toolchain file when given relative path (#645) * Fixed check for user-provided toolchain file when given relative path * WIP: camera/socket board configuration and capability to specify name/alias for a camera instead of socket * Updated Bootloader to v0.0.22 * Added camera naming capabilites, setting and retrieving. WIP: rest of devices * FW/CameraControl: fix still-capture for sockets other than RGB/center * [FW] Fixed ImageManip + Subpixel issues and added FFC camera naming * get/set camera FrameEvent filter * Update depthai-shared submodule * Disable depthai-shared commit hash check * Change github workflows ubuntu version * Update submodule * Rename event filter * fix #650 missing XLinkProtocolToStr() (#657) - add local xlinkproto -> string from luxonis/XLink/tree/5c61615066af6539e50a4a17b5df3466e4350b21 * Updated grammar * Update firmware * WIP: Camera node * Added capability to set XLink logging level via XLINK_LEVEL env var * Replace "_CMAKE_" variables with "_DEPTHAI_" (#662) "_CMAKE_" variables are reserved for internal use and should not be used. This change also makes it harder for other CMake scripts to accidentall overwrite this variable. Co-authored-by: Cameron Blomquist <[email protected]> * Add comments * Update FW: Add missing python bindings for boundingBoxMapping * Updated NETWORK Bootloader with dual protocol capabilities * [FW] Fixed a bug in board downselection. OAK-D S2/Pro camera enumeration fix. * [FW] Added support for Mono video/preview in Camera node * CI - Fixed style & tidy jobs * Updated dual BL to v0.0.23 temporary build * Added OAK-D-LR support. WIP: Orientation capability * [FW/XLink] Explicitly limited to single connection * ImageManip added colormap capability. TODO min/max range selection * Add option to override baseline and/or focal length for disparity to depth conversion * [FW] OAK-D-LR - Fixed default image orientation * Updated brief description that affects docs of the DetectionParser node. * Modified API of Camera a bit * Updated FW with Camera changes and warp capabilities * Updated FW with Camera warp capabilities * Added dai::span * Added undistort/warp API to Camera node * FW - Modifed watchdog to do a graceful reset instead * Added additional API to retrieve timestamps at various exposure points * Fixed documentation on ObjectTracker::setMaxObjectsToTrack * WIP: mockIsp capabilities * [FW] Fix for CAM_C not being detected * Device - Added non exclusive boot option * Slight Colormap API improvements * [FW] Added OpenVINO version 'universal' * Added DeviceBase convinience constructors taking name or deviceid as string * Disabled some of the functionality for now * Tweaked getTimestamp & exposure offset API * FW: IMX296 support, added THE_1440x1080 resolution * FW: IMX296 Camera node, IMX378 1080p limited to 60fps * Bump version to 2.20.0 * Applied formatting * Temporary revert to macos-11 for CI due to Catch2 issues * Modified OpenVINO::VERSION_UNIVERSAL * Updated Bootloader to 0.0.24 * Bump version and FW to 2.20.1 (Status LEDs improvement) * calibration_flash example fix * removed old functions * updated changelogs * updated package.xml --------- Co-authored-by: alex-luxonis <[email protected]> Co-authored-by: TheMarpe <[email protected]> Co-authored-by: SzabolcsGergely <[email protected]> Co-authored-by: szabi-luxonis <[email protected]> Co-authored-by: Matevz Morato <[email protected]> Co-authored-by: moratom <[email protected]> Co-authored-by: TheMarpe <[email protected]> Co-authored-by: alex-luxonis <[email protected]> Co-authored-by: camblomquist <[email protected]> Co-authored-by: Tommy <[email protected]> Co-authored-by: Dale Phurrough <[email protected]> Co-authored-by: Erol444 <[email protected]> Co-authored-by: Cameron Blomquist <[email protected]>
- Loading branch information
14 people
authored
Jan 29, 2023
1 parent
46de84b
commit c8bf70b