Update protobufs and classes #5431
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![github-actions[bot]](https://avatars.githubusercontent.com/in/15368?s=60&v=4){kind=small}
github-actions
bot
force-pushed
the
create-pull-request/patch
branch
from
d00ad7e to
a9d3aad
Compare
github-actions
bot
changed the title
caveman99
approved these changes
Nov 24, 2024
fifieldt
pushed a commit
to nebman/meshtastic-firmware
that referenced
this pull request
Dec 14, 2024
Co-authored-by: caveman99 <[email protected]>
fifieldt
added a commit
that referenced
this pull request
Dec 22, 2024
…battery sensor (#5271) * INA219 charging detection minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging * Update Power.cpp added comments and 2 extra defines to disable and swap detection direction * Update Power.cpp fix disabled case * move getCurrentMa() to new CurrentSensor class * INA219 charging detection minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging * Update Power.cpp added comments and 2 extra defines to disable and swap detection direction * Update Power.cpp fix disabled case * move getCurrentMa() to new CurrentSensor class * add INA3221 charging detection * RP2040: Update core; add mDNS support (#5355) * Update arduino-pico core * RP2040: Add mDNS support * SimpleMDNS `begin` now returns a bool * Add `-g` option to `debug_build_flags` to link files for gdb * RAK11310 needs old platform as well * Change defines to specific architecture * Core version 4.2.1 is out * Add sudo to apt-get commands for Raspbian Build (#5364) Without sudo, inadequate permissions to runs the commands meant the build was failing. * Typo fix in build_raspbian.yml (#5365) s/sudp/sudo :(:(:( * Rework some things * Trunk * Separate littlefs bundle * version tags * Diag * Add littlefswebui * Bug fixed in ExternalNotificationModule (#5375) While `nagging` setExternalState wasn't written to Buzzer & Vibra so output was never toggled. Possible fix for #5348 * Cleanup static files from bad Web UI bundle on 2.5.13 release (#5376) * Cleanup static files from bad Web UI bundle on 2.5.13 release * Check existence first * Esp32 is the only one we care about * Move some actions to after `startTransmit()` (#5383) To minimize the time between channel scan and actual transmit * [create-pull-request] automated change (#5380) Co-authored-by: thebentern <[email protected]> * Allows all 3 PKI keys to be added to userPrefs.h (#4969) and a tool. (#5368) * more userPrefs.h Added PKI Admin keys to userPrefs.h * Update userPrefs.h Allows all 3 PKI keys to be added to userPrefs.h (#4969) * Update NodeDB.cpp Trunk * Update userPrefs.h Changed wording * Create base64_to_hex.py A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand. * more userPrefs.h Added PKI Admin keys to userPrefs.h * Update userPrefs.h Allows all 3 PKI keys to be added to userPrefs.h (#4969) * Update NodeDB.cpp Trunk * Update userPrefs.h Changed wording * Create base64_to_hex.py A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand. * [create-pull-request] automated change (#5388) Co-authored-by: thebentern <[email protected]> * add smiley emoji (#5391) * add smiley emoji * clang-formatted * Anable trace route function on wismeshtap platform (#5389) * fix 'symbal' typo (#5395) * [create-pull-request] automated change (#5399) Co-authored-by: thebentern <[email protected]> * /api/v1/fromradio: add OPTIONS handler for CORS. (#5386) This avoids hitting the 404 Not Found handler, which breaks connection keep-alive, so this change fixes a big performance regression for Web Client in Chrome: #5385 Tested on Heltec V3. Co-authored-by: Ben Meadors <[email protected]> * Make heart emoji usable (#5403) * Create a specific hw_model for WisMesh Tap (#5400) * Create a specific hw_model for WisMesh Tap * Trunk * HAS_ETHERNET * Remove it altogether * Don't need these either * Fix RTC time injection and consolidate position logic (#5396) * Fix RTC time injection and consolidate position logic * Comment out unused var warning * Backerds * Update arduino-pico core to fix sporadic hangs (#5406) * Update platform-raspberrypi also (#5407) * Update arduino-pico core to fix sporadic hangs * Update platform-raspberrypi also * --web added to device-install(.sh/.bat) (#5405) * Add --web * Update device-install.bat Forgot a "-" a few places. --------- Co-authored-by: Ben Meadors <[email protected]> * add GPS in indicator board (#5411) * Fixed NMEA sentence issue in CalTopo as well as bug with no printing all of the nodes (#5412) * --web littlefswebui-* typo fix (#5416) * Add --web * Update device-install.bat Forgot a "-" a few places. * Typo fix. * Typo fix --------- Co-authored-by: Ben Meadors <[email protected]> Co-authored-by: GUVWAF <[email protected]> * Temporarily disable MDNS when MQTT is enabled (#5418) Leads to a panic * Check for OkToMqtt flag presence before uplinking to MQTT (#5413) * Check for oktomqtt flag presence before uplinking to MQTT * Move to mqtt->onSend * Temetry can respond to want-response for LocalStats variant (#5414) * Seems like the last DIY board that's not "extra" (#5420) * Cherry pick tdeck fixes (#5422) * Try-fix (workaround) T-Deck audio crash * set T-Deck audio to unused 48 (mem mclk) * swap mclk to gpio 21 * dreamcatcher: assign GPIO44 to audio mclk --------- Co-authored-by: mverch67 <[email protected]> * add canned message and keyboard in indicator board (#5410) * add canned message and keyboard in indicator board * Added virtual keyboard macro and enabled for Indicator * Cleanup macros by applying USE_VIRTUAL_KEYBOARD and DISPLAY_CLOCK_FRAME --------- Co-authored-by: Ben Meadors <[email protected]> * Update build-native.sh (#5415) * Update build-native.sh Device-install.sh and device-update.sh are not used on native platform, skip copying to release directory after build and copy native-install.sh and native-run.sh instead. * Update build-native.sh Skip native-run.sh copy * Cleans up visibility in GPS.h (#5426) Signed-off-by: Christopher Hoover <[email protected]> * Fix admin key loading from userPrefs.h (#5417) * Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28 * Merge PR #420 * Fixed double and missing Default class. * Use correct format specifier and fixed typo. * Removed duplicate code. * Fix error: #if with no expression * Fix warning: extra tokens at end of #endif directive. * Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board. * Fix deprecated macros. * Set RP2040 in dormant mode when deep sleep is triggered. * Fix array out of bounds read. * Admin key count needs to be set otherwise the key will be zero loaded after reset. * Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible. * Remove log spam when reading INA voltage sensor. * Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots. * Removed newlines from log. --------- Co-authored-by: Ben Meadors <[email protected]> Co-authored-by: Thomas Göttgens <[email protected]> * try to detect dfrobot station to tell it apart from an ublox gps. (#5393) * Remove BMA-423 and STK8X by default (#5429) * Remove BMA-423 by default * STK * Wrong macro * Helps if you include the file * [create-pull-request] automated change (#5431) Co-authored-by: caveman99 <[email protected]> * Support for the ClimateGuard RadSens Geiger-Muller tube (#5425) * fixes #5434 (#5435) * update libpax * fix interval init * Fix memory leaks by adding missing `free()` calls before early returns in `MQTT::onReceive` (#5439) This fix addresses memory leaks in the `MQTT::onReceive` function by ensuring that dynamically allocated resources (`e.channel_id`, `e.gateway_id` and `e.packet`) are properly freed before each early return. Previously, these resources were only freed at the end of the function, leaving them unhandled in certain exit paths. Adding the missing `free()` calls prevents memory leaks and ensures proper resource cleanup in all scenarios. * Removing 1.0 legacy boards from releases and completely removing Heltec wireless capsule from support (#5436) Co-authored-by: Tom Fifield <[email protected]> * A second round of cleanup on GPS.h. (#5433) * Move yet more stuff out of GPS.h and into file scope. * Protect code macros from eating semicolons. * Remove unused (and unimplemented) getDOPString. * clang-format with project style file on affected files. Signed-off-by: Christopher Hoover <[email protected]> * enable MQTT with TLS on RPi picow (#5442) Co-authored-by: Ben Meadors <[email protected]> * Don't powersave on Wifi (#5443) * Don't go into light sleep with wifi enabled * Move * Trunk * Revert "Seems like the last DIY board that's not "extra" (#5420)" (#5446) This reverts commit e6fb6b1. * Actually gunzip all the files when building a .deb (#5449) * [create-pull-request] automated change (#5457) Co-authored-by: thebentern <[email protected]> * Cleanup i2c scan logs and macro to save some bytes and remain consistent (#5455) * Cleanup i2c scan logs and macro to save some bytes and remain consistent * Functions are better than macros * Exclude i2c scan for STM32 * Useless log * Clean up some inline functions (#5454) * Use isWithinTimespanMs to avoid refererence to NodeDb instance inside of NodeDb (#5453) * fix cors for meshtasticd to allow use of cross origin clients (#5463) * Remove ATECC crypto chip placeholder code (#5461) * GPS.h cleanups round 3. (#5447) * GPS.h cleanups round 3. No effective behavior change. Protected members can be private so make it so. (Supporting subclasses needs a lot more work.) Moves uBloxGnssModelInfo into file scope. Moves uBloxProtocolVersion into uBloxGnssModelInfo. Moves baud rate arrays into file scope. Removes unused/ unimplemented powerStateToString. Signed-off-by: Christopher Hoover <[email protected]> * Trunk Format. --------- Signed-off-by: Christopher Hoover <[email protected]> Co-authored-by: Tom Fifield <[email protected]> * Fix ukrainian fonts (#5468) * FIX: rollback to !4624 * UPDATE: new 16 and 24 UA Fonts and fixes * fix: Solve the lightsleep crash problem via disable lightsleep for indicator. (#5470) * Trunk * Warnings and log cleanup (#5472) * Don't log if keyboard not found * Signed comparison issue * [create-pull-request] automated change (#5475) Co-authored-by: thebentern <[email protected]> * Adds libusb dev package to Raspbian build steps (#5480) * [create-pull-request] automated change (#5478) Co-authored-by: thebentern <[email protected]> * Portduino fixes (#5479) * Set config.yaml defaults even if General is missing * Unsigned values should get %u in logging * Update arduino-pico core and remove MDNS restriction (#5483) * Update xiao_esp32 fully support L67K (#5488) L67K module hardware changed * Convert userprefs to a json file instead of header file which has to be included everywhere (#5471) * WIP * Got string quoting and macro expansion working * Need the placeholder * Cleanup * Missed a user prefs reference * Update jsonc * SimRadio: clean-up and emulate collisions (#5487) * Clean up SimRadio and don't let it use PKC * Add collision emulation for SimRadio * Add stats from SimRadio to LocalStats * Make emulating collisions optional * add nodeId to nodeinfo update log lines and removed redundant nodeinfo update log line (#5493) * Refact the macro definition of GPS initialization of GPSDEFAULTD_NOT_PRESENT and added seeeed Indicator to this sequence (#5494) Co-authored-by: Ben Meadors <[email protected]> * Extend Length of Source and Destination Node IDs Logged (#5492) * show 8 chars for logging source and destination ids * extend legnth of source and destination nodes in log * Added femtofox configs (#5477) * added femtofox configs * Rename bin/config.d/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml to bin/config.d/femtofox/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml * moved femtofox configs to subdir * [Add] LR1110, LR1120 and LR1121 to linux native Portduino (#5496) * Update main.cpp * Update PortduinoGlue.h * Update PortduinoGlue.cpp * Update PortduinoGlue.cpp * Update PortduinoGlue.cpp * Update main.cpp * [create-pull-request] automated change (#5500) Co-authored-by: thebentern <[email protected]> * Fix minor typos in package workflows (#5505) * Don't use channel index for encrypted packet (#5509) * Don't use channel index for encrypted packet * Remove assert in `getKey`, set invalid key length So encrypting will fail without reboot * Reset channel to 0 when unable to encrypt Such that the NAK doesn't use the failing channel hash * Always Announce MDNS meshtastic service (#5503) * refactor server api port into define * always announce MDNS meshtastic service * fix nodeDB erase loop when free mem returns invalid value (0, -1). (#5519) Co-authored-by: mverch67 <[email protected]> * Add heltec capsule back * Revert "Add heltec capsule back" This reverts commit fc16d93. * Lets try this again minus device ui * Add popular nrf52 pro micro to the builds (#5523) * Add MACAddress to config.yaml (#5506) * Add MACAddress to config.yaml * Better error handling on native, including failing to launch with blank MAC Address and real hardware. * Re-arrange Mac Address handling and add MACAddressSource * Bump portduino to remove macaddr function there --------- Co-authored-by: Ben Meadors <[email protected]> * Configure Seeed Xiao S3 RX enable pin (#5517) * Create OpenWRT_One_mikroBUS_sx1262.yaml (#5529) * tlora_v2_1_16: Unset BUTTON_PIN and BUTTON_NEED_PULLUP (#5535) Unset BUTTON_PIN and BUTTON_NEED_PULLUP as the board ships without a user button. Devices and users expecting a button on GPIO12 have to set [GPIO for user button](https://meshtastic.org/docs/configuration/radio/device/#gpio-for-user-button) to 12 (or any GPIO pin the momentary switch was connected to) to restore functionality. Signed-off-by: Andrew Yong <[email protected]> * [create-pull-request] automated change (#5530) Co-authored-by: thebentern <[email protected]> * Fix detection for some RadSens hardware versions (#5542) Co-authored-by: Jake-B <[email protected]> * Initialize dmac array to nulls (#5538) * Initialize dmac array to nulls * Use std::cout for print before console is init. * Update OpenWRT_One_mikroBUS_sx1262.yaml (#5544) * Add portduino-buildroot variant (#5540) * Add portduino-buildroot variant * Update platform-native for platform-buildroot * portduino-buildroot: Define c standard (#5547) * Portduino: Move meshtasticd/web out of /usr/share/doc/ (#5548) * Portduino: fix transitional symlinks (#5550) * Windows Support - Trunk and Platformio (#5397) (#5518) * Add support for GPG * Add usb device support * Add trunk.io to devcontainer * Trunk things * trunk fmt * formatting * fix trivy/DS002, checkov/CKV_DOCKER_3 * hide docker extension popup * fix trivy/DS026, checkov/CKV_DOCKER_2 Co-authored-by: Kalle Lilja <[email protected]> * Synch minor changes from TFT branch (#5520) * Synch minor changes from TFT branch Includes: * New nordicnrf52 minor version (10.5.0 --> 10.6.0) * Optimisations for T_DECK * preparation for MESH_TAB * add ext notification module to portduino --------- Co-authored-by: mverch67 <[email protected]> * DIO3_TCXO_VOLTAGE in config.yaml can now take an exact voltage (#5558) * Support TLORA_V3.0 (#5563) - Support TLORA_V3.0. Update of the legendary 2.1_1.6.1 with solar charger, TCXO and IPEX connector. - 'extra' some short-lived EOL intermediate boards in that range. If possible use T3S3 instead of all of these! - update trunk to latest version * Create OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml (#5564) * Portduino: fix setting hwId via argument (#5565) * INA219 charging detection minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging * Update Power.cpp added comments and 2 extra defines to disable and swap detection direction * Trunk Fixes * Add INA226 support --------- Signed-off-by: Christopher Hoover <[email protected]> Signed-off-by: Andrew Yong <[email protected]> Co-authored-by: Ben Meadors <[email protected]> Co-authored-by: Jonathan Bennett <[email protected]> Co-authored-by: GUVWAF <[email protected]> Co-authored-by: Tom Fifield <[email protected]> Co-authored-by: Michael Gjelsø <[email protected]> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <[email protected]> Co-authored-by: jcyrio <[email protected]> Co-authored-by: Daniel.Cao <[email protected]> Co-authored-by: Catalin Patulea <[email protected]> Co-authored-by: dylanli <[email protected]> Co-authored-by: mverch67 <[email protected]> Co-authored-by: madeofstown <[email protected]> Co-authored-by: Christopher Hoover <[email protected]> Co-authored-by: Mictronics <[email protected]> Co-authored-by: Thomas Göttgens <[email protected]> Co-authored-by: caveman99 <[email protected]> Co-authored-by: jake-b <[email protected]> Co-authored-by: César de Tassis Filho <[email protected]> Co-authored-by: Tomas Dubec <[email protected]> Co-authored-by: Liam Cottle <[email protected]> Co-authored-by: panaceya <[email protected]> Co-authored-by: virgil <[email protected]> Co-authored-by: Robert <[email protected]> Co-authored-by: noon92 <[email protected]> Co-authored-by: Mark Trevor Birss <[email protected]> Co-authored-by: broglep <[email protected]> Co-authored-by: Matthias Granberry <[email protected]> Co-authored-by: Andrew Yong <[email protected]> Co-authored-by: Jake-B <[email protected]> Co-authored-by: Austin <[email protected]> Co-authored-by: Kalle Lilja <[email protected]>
tavdog
added a commit
to tavdog/meshtastic-firmware
that referenced
this pull request
Dec 22, 2024
commit 91d6a4e Merge: dc260bc 80fc0f2 Author: Tavis <[email protected]> Date: Sat Dec 21 18:55:39 2024 -1000 Merge remote-tracking branch 'upstream/master' commit 80fc0f2 Author: nebman <[email protected]> Date: Sun Dec 22 05:02:50 2024 +0100 Detect charging status by measuring current flow with configured INA battery sensor (meshtastic#5271) * INA219 charging detection minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging * Update Power.cpp added comments and 2 extra defines to disable and swap detection direction * Update Power.cpp fix disabled case * move getCurrentMa() to new CurrentSensor class * INA219 charging detection minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging * Update Power.cpp added comments and 2 extra defines to disable and swap detection direction * Update Power.cpp fix disabled case * move getCurrentMa() to new CurrentSensor class * add INA3221 charging detection * RP2040: Update core; add mDNS support (meshtastic#5355) * Update arduino-pico core * RP2040: Add mDNS support * SimpleMDNS `begin` now returns a bool * Add `-g` option to `debug_build_flags` to link files for gdb * RAK11310 needs old platform as well * Change defines to specific architecture * Core version 4.2.1 is out * Add sudo to apt-get commands for Raspbian Build (meshtastic#5364) Without sudo, inadequate permissions to runs the commands meant the build was failing. * Typo fix in build_raspbian.yml (meshtastic#5365) s/sudp/sudo :(:(:( * Rework some things * Trunk * Separate littlefs bundle * version tags * Diag * Add littlefswebui * Bug fixed in ExternalNotificationModule (meshtastic#5375) While `nagging` setExternalState wasn't written to Buzzer & Vibra so output was never toggled. Possible fix for meshtastic#5348 * Cleanup static files from bad Web UI bundle on 2.5.13 release (meshtastic#5376) * Cleanup static files from bad Web UI bundle on 2.5.13 release * Check existence first * Esp32 is the only one we care about * Move some actions to after `startTransmit()` (meshtastic#5383) To minimize the time between channel scan and actual transmit * [create-pull-request] automated change (meshtastic#5380) Co-authored-by: thebentern <[email protected]> * Allows all 3 PKI keys to be added to userPrefs.h (meshtastic#4969) and a tool. (meshtastic#5368) * more userPrefs.h Added PKI Admin keys to userPrefs.h * Update userPrefs.h Allows all 3 PKI keys to be added to userPrefs.h (meshtastic#4969) * Update NodeDB.cpp Trunk * Update userPrefs.h Changed wording * Create base64_to_hex.py A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand. * more userPrefs.h Added PKI Admin keys to userPrefs.h * Update userPrefs.h Allows all 3 PKI keys to be added to userPrefs.h (meshtastic#4969) * Update NodeDB.cpp Trunk * Update userPrefs.h Changed wording * Create base64_to_hex.py A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand. * [create-pull-request] automated change (meshtastic#5388) Co-authored-by: thebentern <[email protected]> * add smiley emoji (meshtastic#5391) * add smiley emoji * clang-formatted * Anable trace route function on wismeshtap platform (meshtastic#5389) * fix 'symbal' typo (meshtastic#5395) * [create-pull-request] automated change (meshtastic#5399) Co-authored-by: thebentern <[email protected]> * /api/v1/fromradio: add OPTIONS handler for CORS. (meshtastic#5386) This avoids hitting the 404 Not Found handler, which breaks connection keep-alive, so this change fixes a big performance regression for Web Client in Chrome: meshtastic#5385 Tested on Heltec V3. Co-authored-by: Ben Meadors <[email protected]> * Make heart emoji usable (meshtastic#5403) * Create a specific hw_model for WisMesh Tap (meshtastic#5400) * Create a specific hw_model for WisMesh Tap * Trunk * HAS_ETHERNET * Remove it altogether * Don't need these either * Fix RTC time injection and consolidate position logic (meshtastic#5396) * Fix RTC time injection and consolidate position logic * Comment out unused var warning * Backerds * Update arduino-pico core to fix sporadic hangs (meshtastic#5406) * Update platform-raspberrypi also (meshtastic#5407) * Update arduino-pico core to fix sporadic hangs * Update platform-raspberrypi also * --web added to device-install(.sh/.bat) (meshtastic#5405) * Add --web * Update device-install.bat Forgot a "-" a few places. --------- Co-authored-by: Ben Meadors <[email protected]> * add GPS in indicator board (meshtastic#5411) * Fixed NMEA sentence issue in CalTopo as well as bug with no printing all of the nodes (meshtastic#5412) * --web littlefswebui-* typo fix (meshtastic#5416) * Add --web * Update device-install.bat Forgot a "-" a few places. * Typo fix. * Typo fix --------- Co-authored-by: Ben Meadors <[email protected]> Co-authored-by: GUVWAF <[email protected]> * Temporarily disable MDNS when MQTT is enabled (meshtastic#5418) Leads to a panic * Check for OkToMqtt flag presence before uplinking to MQTT (meshtastic#5413) * Check for oktomqtt flag presence before uplinking to MQTT * Move to mqtt->onSend * Temetry can respond to want-response for LocalStats variant (meshtastic#5414) * Seems like the last DIY board that's not "extra" (meshtastic#5420) * Cherry pick tdeck fixes (meshtastic#5422) * Try-fix (workaround) T-Deck audio crash * set T-Deck audio to unused 48 (mem mclk) * swap mclk to gpio 21 * dreamcatcher: assign GPIO44 to audio mclk --------- Co-authored-by: mverch67 <[email protected]> * add canned message and keyboard in indicator board (meshtastic#5410) * add canned message and keyboard in indicator board * Added virtual keyboard macro and enabled for Indicator * Cleanup macros by applying USE_VIRTUAL_KEYBOARD and DISPLAY_CLOCK_FRAME --------- Co-authored-by: Ben Meadors <[email protected]> * Update build-native.sh (meshtastic#5415) * Update build-native.sh Device-install.sh and device-update.sh are not used on native platform, skip copying to release directory after build and copy native-install.sh and native-run.sh instead. * Update build-native.sh Skip native-run.sh copy * Cleans up visibility in GPS.h (meshtastic#5426) Signed-off-by: Christopher Hoover <[email protected]> * Fix admin key loading from userPrefs.h (meshtastic#5417) * Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28 * Merge PR meshtastic#420 * Fixed double and missing Default class. * Use correct format specifier and fixed typo. * Removed duplicate code. * Fix error: #if with no expression * Fix warning: extra tokens at end of #endif directive. * Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board. * Fix deprecated macros. * Set RP2040 in dormant mode when deep sleep is triggered. * Fix array out of bounds read. * Admin key count needs to be set otherwise the key will be zero loaded after reset. * Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible. * Remove log spam when reading INA voltage sensor. * Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots. * Removed newlines from log. --------- Co-authored-by: Ben Meadors <[email protected]> Co-authored-by: Thomas Göttgens <[email protected]> * try to detect dfrobot station to tell it apart from an ublox gps. (meshtastic#5393) * Remove BMA-423 and STK8X by default (meshtastic#5429) * Remove BMA-423 by default * STK * Wrong macro * Helps if you include the file * [create-pull-request] automated change (meshtastic#5431) Co-authored-by: caveman99 <[email protected]> * Support for the ClimateGuard RadSens Geiger-Muller tube (meshtastic#5425) * fixes meshtastic#5434 (meshtastic#5435) * update libpax * fix interval init * Fix memory leaks by adding missing `free()` calls before early returns in `MQTT::onReceive` (meshtastic#5439) This fix addresses memory leaks in the `MQTT::onReceive` function by ensuring that dynamically allocated resources (`e.channel_id`, `e.gateway_id` and `e.packet`) are properly freed before each early return. Previously, these resources were only freed at the end of the function, leaving them unhandled in certain exit paths. Adding the missing `free()` calls prevents memory leaks and ensures proper resource cleanup in all scenarios. * Removing 1.0 legacy boards from releases and completely removing Heltec wireless capsule from support (meshtastic#5436) Co-authored-by: Tom Fifield <[email protected]> * A second round of cleanup on GPS.h. (meshtastic#5433) * Move yet more stuff out of GPS.h and into file scope. * Protect code macros from eating semicolons. * Remove unused (and unimplemented) getDOPString. * clang-format with project style file on affected files. Signed-off-by: Christopher Hoover <[email protected]> * enable MQTT with TLS on RPi picow (meshtastic#5442) Co-authored-by: Ben Meadors <[email protected]> * Don't powersave on Wifi (meshtastic#5443) * Don't go into light sleep with wifi enabled * Move * Trunk * Revert "Seems like the last DIY board that's not "extra" (meshtastic#5420)" (meshtastic#5446) This reverts commit e6fb6b1. * Actually gunzip all the files when building a .deb (meshtastic#5449) * [create-pull-request] automated change (meshtastic#5457) Co-authored-by: thebentern <[email protected]> * Cleanup i2c scan logs and macro to save some bytes and remain consistent (meshtastic#5455) * Cleanup i2c scan logs and macro to save some bytes and remain consistent * Functions are better than macros * Exclude i2c scan for STM32 * Useless log * Clean up some inline functions (meshtastic#5454) * Use isWithinTimespanMs to avoid refererence to NodeDb instance inside of NodeDb (meshtastic#5453) * fix cors for meshtasticd to allow use of cross origin clients (meshtastic#5463) * Remove ATECC crypto chip placeholder code (meshtastic#5461) * GPS.h cleanups round 3. (meshtastic#5447) * GPS.h cleanups round 3. No effective behavior change. Protected members can be private so make it so. (Supporting subclasses needs a lot more work.) Moves uBloxGnssModelInfo into file scope. Moves uBloxProtocolVersion into uBloxGnssModelInfo. Moves baud rate arrays into file scope. Removes unused/ unimplemented powerStateToString. Signed-off-by: Christopher Hoover <[email protected]> * Trunk Format. --------- Signed-off-by: Christopher Hoover <[email protected]> Co-authored-by: Tom Fifield <[email protected]> * Fix ukrainian fonts (meshtastic#5468) * FIX: rollback to !4624 * UPDATE: new 16 and 24 UA Fonts and fixes * fix: Solve the lightsleep crash problem via disable lightsleep for indicator. (meshtastic#5470) * Trunk * Warnings and log cleanup (meshtastic#5472) * Don't log if keyboard not found * Signed comparison issue * [create-pull-request] automated change (meshtastic#5475) Co-authored-by: thebentern <[email protected]> * Adds libusb dev package to Raspbian build steps (meshtastic#5480) * [create-pull-request] automated change (meshtastic#5478) Co-authored-by: thebentern <[email protected]> * Portduino fixes (meshtastic#5479) * Set config.yaml defaults even if General is missing * Unsigned values should get %u in logging * Update arduino-pico core and remove MDNS restriction (meshtastic#5483) * Update xiao_esp32 fully support L67K (meshtastic#5488) L67K module hardware changed * Convert userprefs to a json file instead of header file which has to be included everywhere (meshtastic#5471) * WIP * Got string quoting and macro expansion working * Need the placeholder * Cleanup * Missed a user prefs reference * Update jsonc * SimRadio: clean-up and emulate collisions (meshtastic#5487) * Clean up SimRadio and don't let it use PKC * Add collision emulation for SimRadio * Add stats from SimRadio to LocalStats * Make emulating collisions optional * add nodeId to nodeinfo update log lines and removed redundant nodeinfo update log line (meshtastic#5493) * Refact the macro definition of GPS initialization of GPSDEFAULTD_NOT_PRESENT and added seeeed Indicator to this sequence (meshtastic#5494) Co-authored-by: Ben Meadors <[email protected]> * Extend Length of Source and Destination Node IDs Logged (meshtastic#5492) * show 8 chars for logging source and destination ids * extend legnth of source and destination nodes in log * Added femtofox configs (meshtastic#5477) * added femtofox configs * Rename bin/config.d/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml to bin/config.d/femtofox/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml * moved femtofox configs to subdir * [Add] LR1110, LR1120 and LR1121 to linux native Portduino (meshtastic#5496) * Update main.cpp * Update PortduinoGlue.h * Update PortduinoGlue.cpp * Update PortduinoGlue.cpp * Update PortduinoGlue.cpp * Update main.cpp * [create-pull-request] automated change (meshtastic#5500) Co-authored-by: thebentern <[email protected]> * Fix minor typos in package workflows (meshtastic#5505) * Don't use channel index for encrypted packet (meshtastic#5509) * Don't use channel index for encrypted packet * Remove assert in `getKey`, set invalid key length So encrypting will fail without reboot * Reset channel to 0 when unable to encrypt Such that the NAK doesn't use the failing channel hash * Always Announce MDNS meshtastic service (meshtastic#5503) * refactor server api port into define * always announce MDNS meshtastic service * fix nodeDB erase loop when free mem returns invalid value (0, -1). (meshtastic#5519) Co-authored-by: mverch67 <[email protected]> * Add heltec capsule back * Revert "Add heltec capsule back" This reverts commit fc16d93. * Lets try this again minus device ui * Add popular nrf52 pro micro to the builds (meshtastic#5523) * Add MACAddress to config.yaml (meshtastic#5506) * Add MACAddress to config.yaml * Better error handling on native, including failing to launch with blank MAC Address and real hardware. * Re-arrange Mac Address handling and add MACAddressSource * Bump portduino to remove macaddr function there --------- Co-authored-by: Ben Meadors <[email protected]> * Configure Seeed Xiao S3 RX enable pin (meshtastic#5517) * Create OpenWRT_One_mikroBUS_sx1262.yaml (meshtastic#5529) * tlora_v2_1_16: Unset BUTTON_PIN and BUTTON_NEED_PULLUP (meshtastic#5535) Unset BUTTON_PIN and BUTTON_NEED_PULLUP as the board ships without a user button. Devices and users expecting a button on GPIO12 have to set [GPIO for user button](https://meshtastic.org/docs/configuration/radio/device/#gpio-for-user-button) to 12 (or any GPIO pin the momentary switch was connected to) to restore functionality. Signed-off-by: Andrew Yong <[email protected]> * [create-pull-request] automated change (meshtastic#5530) Co-authored-by: thebentern <[email protected]> * Fix detection for some RadSens hardware versions (meshtastic#5542) Co-authored-by: Jake-B <[email protected]> * Initialize dmac array to nulls (meshtastic#5538) * Initialize dmac array to nulls * Use std::cout for print before console is init. * Update OpenWRT_One_mikroBUS_sx1262.yaml (meshtastic#5544) * Add portduino-buildroot variant (meshtastic#5540) * Add portduino-buildroot variant * Update platform-native for platform-buildroot * portduino-buildroot: Define c standard (meshtastic#5547) * Portduino: Move meshtasticd/web out of /usr/share/doc/ (meshtastic#5548) * Portduino: fix transitional symlinks (meshtastic#5550) * Windows Support - Trunk and Platformio (meshtastic#5397) (meshtastic#5518) * Add support for GPG * Add usb device support * Add trunk.io to devcontainer * Trunk things * trunk fmt * formatting * fix trivy/DS002, checkov/CKV_DOCKER_3 * hide docker extension popup * fix trivy/DS026, checkov/CKV_DOCKER_2 Co-authored-by: Kalle Lilja <[email protected]> * Synch minor changes from TFT branch (meshtastic#5520) * Synch minor changes from TFT branch Includes: * New nordicnrf52 minor version (10.5.0 --> 10.6.0) * Optimisations for T_DECK * preparation for MESH_TAB * add ext notification module to portduino --------- Co-authored-by: mverch67 <[email protected]> * DIO3_TCXO_VOLTAGE in config.yaml can now take an exact voltage (meshtastic#5558) * Support TLORA_V3.0 (meshtastic#5563) - Support TLORA_V3.0. Update of the legendary 2.1_1.6.1 with solar charger, TCXO and IPEX connector. - 'extra' some short-lived EOL intermediate boards in that range. If possible use T3S3 instead of all of these! - update trunk to latest version * Create OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml (meshtastic#5564) * Portduino: fix setting hwId via argument (meshtastic#5565) * INA219 charging detection minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging * Update Power.cpp added comments and 2 extra defines to disable and swap detection direction * Trunk Fixes * Add INA226 support --------- Signed-off-by: Christopher Hoover <[email protected]> Signed-off-by: Andrew Yong <[email protected]> Co-authored-by: Ben Meadors <[email protected]> Co-authored-by: Jonathan Bennett <[email protected]> Co-authored-by: GUVWAF <[email protected]> Co-authored-by: Tom Fifield <[email protected]> Co-authored-by: Michael Gjelsø <[email protected]> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <[email protected]> Co-authored-by: jcyrio <[email protected]> Co-authored-by: Daniel.Cao <[email protected]> Co-authored-by: Catalin Patulea <[email protected]> Co-authored-by: dylanli <[email protected]> Co-authored-by: mverch67 <[email protected]> Co-authored-by: madeofstown <[email protected]> Co-authored-by: Christopher Hoover <[email protected]> Co-authored-by: Mictronics <[email protected]> Co-authored-by: Thomas Göttgens <[email protected]> Co-authored-by: caveman99 <[email protected]> Co-authored-by: jake-b <[email protected]> Co-authored-by: César de Tassis Filho <[email protected]> Co-authored-by: Tomas Dubec <[email protected]> Co-authored-by: Liam Cottle <[email protected]> Co-authored-by: panaceya <[email protected]> Co-authored-by: virgil <[email protected]> Co-authored-by: Robert <[email protected]> Co-authored-by: noon92 <[email protected]> Co-authored-by: Mark Trevor Birss <[email protected]> Co-authored-by: broglep <[email protected]> Co-authored-by: Matthias Granberry <[email protected]> Co-authored-by: Andrew Yong <[email protected]> Co-authored-by: Jake-B <[email protected]> Co-authored-by: Austin <[email protected]> Co-authored-by: Kalle Lilja <[email protected]> commit fa1a1fd Author: noon92 <[email protected]> Date: Sun Dec 22 01:04:18 2024 +0200 Update Femtofox configs (meshtastic#5646) * Delete bin/config.d/femtofox/femtofox_EByte-E22-900M30S_Ebyte-E22-900M22S.yaml * Delete bin/config.d/femtofox/femtofox_EByte-E22-900MM22S.yaml * Delete bin/config.d/femtofox/femtofox_Heltec-HT-RA62_Seeed-WIO-SX1262.yaml * Delete bin/config.d/femtofox/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml * Add files via upload * Update and rename bin/config.d/femtofox_SX1262_XTAL.yaml to bin/config.d/femtofox/femtofox_SX1262_XTAL.yaml * Update and rename bin/config.d/femtofox_LR1121_TCXO.yaml to bin/config.d/femtofox/femtofox_LR1121_TCXO.yaml * Update and rename bin/config.d/femtofox_SX1262_TCXO.yaml to bin/config.d/femtofox/femtofox_SX1262_TCXO.yaml commit 2fd5a48 Author: Eric Severance <[email protected]> Date: Sat Dec 21 12:07:20 2024 -0800 Separate host:port before checking for private IP (x2) (meshtastic#5643) commit f4cff33 Author: GUVWAF <[email protected]> Date: Sat Dec 21 18:13:03 2024 +0100 Portduino: specify C++ version and add link pthread (meshtastic#5642) commit 1c8b165 Author: Ben Meadors <[email protected]> Date: Sat Dec 21 11:03:17 2024 -0600 Add libusb to dockerfile for ch341 (meshtastic#5641) commit 8e6ef4e Author: Thomas Göttgens <[email protected]> Date: Sat Dec 21 14:57:01 2024 +0100 add nugget and nibble boards for 38c3 (meshtastic#5609) * add nugget and nibble boards for 38c3 * mark those boards extra for now commit fb7866f Author: Ben Meadors <[email protected]> Date: Sat Dec 21 07:49:25 2024 -0600 Revert "Check if MQTT remote IP is private (meshtastic#5627)" (meshtastic#5636) This reverts commit 9a10907. commit d9b2878 Author: Ben Meadors <[email protected]> Date: Sat Dec 21 07:48:47 2024 -0600 Revert "Separate host/port before checking for private IP (meshtastic#5630)" (meshtastic#5635) This reverts commit 398d290. commit f39a9c5 Author: Ben Meadors <[email protected]> Date: Fri Dec 20 21:42:54 2024 -0600 Clean up some straggler NRF52 json (meshtastic#5628) commit 398d290 Author: Eric Severance <[email protected]> Date: Fri Dec 20 19:06:01 2024 -0800 Separate host/port before checking for private IP (meshtastic#5630) commit df63423 Author: Tom Fifield <[email protected]> Date: Sat Dec 21 12:26:23 2024 +1100 Let RangeTest Module use Phone position if there's no GPS (meshtastic#5623) As reported by @Fastomat, if a user had enabled "Share Phone Position" in the app, RangeTest did not use this position and recorded a 0,0 lat/lon. This change preferences GPS where avaialble, but otherwise uses the position stored for the node in NodeDB. fixes meshtastic#5620 commit 9a10907 Author: Eric Severance <[email protected]> Date: Fri Dec 20 17:25:31 2024 -0800 Check if MQTT remote IP is private (meshtastic#5627) commit 5fed679 Author: Tom Fifield <[email protected]> Date: Sat Dec 21 12:24:29 2024 +1100 Add detection code for INA226 (meshtastic#5605) INA226 is a high accuracy current and voltage sensor. commit 58d80b8 Author: Eric Severance <[email protected]> Date: Fri Dec 20 16:21:27 2024 -0800 Use IPAddress.fromString for parsing private IPs (meshtastic#5621) commit 960626e Author: Jonathan Bennett <[email protected]> Date: Fri Dec 20 17:34:02 2024 -0600 Ch341 (meshtastic#5474) * Very hacky first attempt at usermod ech341 * Fixes and debug printfs * Move to library version of libpinedio-usb * Add spidev: ch341 option in meshtasticd config.yaml * Only check settingsStrings on native * Use new CH341 code * Bump ch341 lib * Cleanup USBHal * Add ch341 config.d files * Remove ch341quirk * Bump to most recent spi-userspace driver * Add handling for ch341 serial, pid, and vid * Minor fixes from pio check * Trunk * Add include for musl compliance * Point to upstream libch341 commit 658459a Author: Eric Severance <[email protected]> Date: Fri Dec 20 12:59:23 2024 -0800 Use encoded ServiceEnvelope in mqttQueue (meshtastic#5619) commit e1de439 Author: Eric Severance <[email protected]> Date: Thu Dec 19 17:14:27 2024 -0800 Remove unnecessary memcpy for PKI crypto (meshtastic#5608) * Remove unnecessary memcpy for PKI crypto * Update comment s/packet_id/id/ * Create a copy of bytes for each channel decrypt --------- Co-authored-by: Jonathan Bennett <[email protected]> commit 827553f Author: Ben Meadors <[email protected]> Date: Thu Dec 19 08:42:49 2024 -0600 Only execute on workflow_dispatch commit 445c641 Author: Ben Meadors <[email protected]> Date: Thu Dec 19 07:52:17 2024 -0600 Version commit 7075a05 Author: Ben Meadors <[email protected]> Date: Thu Dec 19 06:27:19 2024 -0600 Fix docker secret permission commit 63091b7 Author: Lewis He <[email protected]> Date: Thu Dec 19 20:21:54 2024 +0800 [T-Deck] Fixed the issue that some devices may experience low voltage reset due to excessive startup current (meshtastic#5607) Co-authored-by: Ben Meadors <[email protected]> commit 8c6eec5 Author: Eric Severance <[email protected]> Date: Thu Dec 19 03:47:46 2024 -0800 Refactor MQTT::onReceive to reduce if/else nesting (meshtastic#5592) * Refactor MQTT::onReceive to reduce if/else nesting * Fix missing #include <functional> * const DecodedServiceEnvelope e * Combine validDecode if statement. * Only call pb_release when validDecode. * s/ptr/channelName/ * Use reference type for deleter * Use lambda instead of bind * Document deleter * Reorder 'if's to avoid object creation * Remove unnecessary comment * Remove 'else'; simpifies meshtastic#5516 --------- Co-authored-by: Ben Meadors <[email protected]> commit 6841348 Author: Ben Meadors <[email protected]> Date: Wed Dec 18 07:15:48 2024 -0600 Switch back docker/login-action commit af79970 Author: 📡 WatskeBart 🤖 <[email protected]> Date: Wed Dec 18 05:46:18 2024 +0100 Added product url (meshtastic#5594) commit 4edeca5 Author: Tom <[email protected]> Date: Tue Dec 17 16:25:37 2024 +0000 Added support for the LR1121 radio to the NRF52 Pro-Micro (meshtastic#5515) * Added support for the LR1121 radio Added support for the LR1121 radio, tested as functional with an E80-900M2213S from CDEbyte. * Swap PNG for PDF * remove PNG * put TCXO voltage to 1.8, as in example file It worked at 1.6v, but ¯\_(ツ)_/¯ * Hopefully this will appease Trunk * Update rf switch pins and Schematic --------- Co-authored-by: Ben Meadors <[email protected]> commit b0e3039 Author: Ben Meadors <[email protected]> Date: Tue Dec 17 06:52:26 2024 -0600 Bump platform commit 92511ab Author: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Date: Tue Dec 17 06:33:17 2024 -0600 [create-pull-request] automated change (meshtastic#5597) Co-authored-by: thebentern <[email protected]> commit b0a4087 Author: Ben Meadors <[email protected]> Date: Tue Dec 17 06:12:23 2024 -0600 Bump nano-pb commit 1b2fc00 Author: Ben Meadors <[email protected]> Date: Tue Dec 17 05:45:31 2024 -0600 Update main_matrix.yml commit 69d01a8 Author: GUVWAF <[email protected]> Date: Sun Dec 15 20:11:13 2024 +0100 StoreForward: (tapback) reply support (meshtastic#5585) commit 09c082f Author: Ben Meadors <[email protected]> Date: Sun Dec 15 09:59:14 2024 -0600 Fix omission of AQ metrics (meshtastic#5584) commit 020e910 Author: Tom Fifield <[email protected]> Date: Mon Dec 16 00:14:48 2024 +1100 Define BUTTON_PIN as -1 for RP2040-lora (meshtastic#5574) The previous approach of undef'ing meant that it was impossible for users to change the button pin in the apps. Fixes meshtastic#5566 commit 2d45afa Author: Ben Meadors <[email protected]> Date: Sun Dec 15 06:52:45 2024 -0600 Try docker authentication with command-line instead commit 5600215 Author: Tom Fifield <[email protected]> Date: Sun Dec 15 23:23:27 2024 +1100 Based default Node Names on NodeNum, rather than MAC address (meshtastic#5576) Presently we base the default long name (Meshtastic XXXX) and short names (XXXX) on a node's MAC address. This works fine, unless you have a node with no bluetooth, like Portduino. Our logic for node numbers is also based on MAC address. However, it has the added feature that it will create a random node number if the Mac address is no good. The name is always "Meshtastic 0001". This change switches node names (long and short) to instead rely on the node number for defaults. For nodes with mac addresses, there should be no user-visible change. For nodes without, they'll now have a name other than "Meshtastic 0001". Fixes meshtastic#5370 Co-authored-by: Ben Meadors <[email protected]> commit 547a572 Author: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Date: Sun Dec 15 05:23:15 2024 -0600 [create-pull-request] automated change (meshtastic#5577) Co-authored-by: fifieldt <[email protected]> commit ea72abf Author: Ben Meadors <[email protected]> Date: Sat Dec 14 20:21:19 2024 -0600 Posthumous tronk commit 4024bfd Author: Aaron.Lee <[email protected]> Date: Sun Dec 15 10:20:29 2024 +0800 Add screen detection function (meshtastic#5533) commit 6d8be13 Author: Austin <[email protected]> Date: Sat Dec 14 20:19:19 2024 -0500 Portduino-buildroot: Remove pkg-config optional libs (meshtastic#5573) commit 4a1239f Author: André Perdigão Gonçalves <[email protected]> Date: Sun Dec 15 00:43:41 2024 +0000 Add new endpoint to retrieve node info (meshtastic#5557) commit 44cf6d3 Author: GUVWAF <[email protected]> Date: Sat Dec 14 11:55:32 2024 +0100 Portduino: fix setting hwId via argument (meshtastic#5565) commit c3f89a6 Author: Mark Trevor Birss <[email protected]> Date: Sat Dec 14 12:46:35 2024 +0200 Create OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml (meshtastic#5564) commit 332dbaf Author: Thomas Göttgens <[email protected]> Date: Sat Dec 14 10:59:15 2024 +0100 Support TLORA_V3.0 (meshtastic#5563) - Support TLORA_V3.0. Update of the legendary 2.1_1.6.1 with solar charger, TCXO and IPEX connector. - 'extra' some short-lived EOL intermediate boards in that range. If possible use T3S3 instead of all of these! - update trunk to latest version commit 92225eb Author: Jonathan Bennett <[email protected]> Date: Fri Dec 13 11:48:27 2024 -0600 DIO3_TCXO_VOLTAGE in config.yaml can now take an exact voltage (meshtastic#5558) commit 03770b7 Author: Tom Fifield <[email protected]> Date: Fri Dec 13 03:42:41 2024 +1100 Synch minor changes from TFT branch (meshtastic#5520) * Synch minor changes from TFT branch Includes: * New nordicnrf52 minor version (10.5.0 --> 10.6.0) * Optimisations for T_DECK * preparation for MESH_TAB * add ext notification module to portduino --------- Co-authored-by: mverch67 <[email protected]> commit 1790407 Author: Tom Fifield <[email protected]> Date: Fri Dec 13 02:58:19 2024 +1100 Windows Support - Trunk and Platformio (meshtastic#5397) (meshtastic#5518) * Add support for GPG * Add usb device support * Add trunk.io to devcontainer * Trunk things * trunk fmt * formatting * fix trivy/DS002, checkov/CKV_DOCKER_3 * hide docker extension popup * fix trivy/DS026, checkov/CKV_DOCKER_2 Co-authored-by: Kalle Lilja <[email protected]> commit 7dd3629 Author: Austin <[email protected]> Date: Tue Dec 10 16:02:38 2024 -0500 Portduino: fix transitional symlinks (meshtastic#5550) commit cabeb40 Author: Austin <[email protected]> Date: Tue Dec 10 14:58:16 2024 -0500 Portduino: Move meshtasticd/web out of /usr/share/doc/ (meshtastic#5548) commit 761a99d Author: Austin <[email protected]> Date: Tue Dec 10 11:09:54 2024 -0500 portduino-buildroot: Define c standard (meshtastic#5547) commit cf46e67 Author: Austin <[email protected]> Date: Tue Dec 10 10:14:52 2024 -0500 Add portduino-buildroot variant (meshtastic#5540) * Add portduino-buildroot variant * Update platform-native for platform-buildroot commit 438f627 Author: Mark Trevor Birss <[email protected]> Date: Tue Dec 10 09:46:50 2024 +0200 Update OpenWRT_One_mikroBUS_sx1262.yaml (meshtastic#5544) commit 0e3dae4 Author: Jonathan Bennett <[email protected]> Date: Mon Dec 9 21:51:55 2024 -0600 Initialize dmac array to nulls (meshtastic#5538) * Initialize dmac array to nulls * Use std::cout for print before console is init. commit d0e3427 Author: jake-b <[email protected]> Date: Mon Dec 9 20:46:13 2024 -0500 Fix detection for some RadSens hardware versions (meshtastic#5542) Co-authored-by: Jake-B <[email protected]> commit f3850ee Author: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Date: Mon Dec 9 06:50:30 2024 -0600 [create-pull-request] automated change (meshtastic#5530) Co-authored-by: thebentern <[email protected]> commit 3ae85e2 Author: Andrew Yong <[email protected]> Date: Mon Dec 9 19:38:51 2024 +0800 tlora_v2_1_16: Unset BUTTON_PIN and BUTTON_NEED_PULLUP (meshtastic#5535) Unset BUTTON_PIN and BUTTON_NEED_PULLUP as the board ships without a user button. Devices and users expecting a button on GPIO12 have to set [GPIO for user button](https://meshtastic.org/docs/configuration/radio/device/#gpio-for-user-button) to 12 (or any GPIO pin the momentary switch was connected to) to restore functionality. Signed-off-by: Andrew Yong <[email protected]> commit f81d3b0 Author: Mark Trevor Birss <[email protected]> Date: Sun Dec 8 12:06:45 2024 +0200 Create OpenWRT_One_mikroBUS_sx1262.yaml (meshtastic#5529) commit 59ed5c9 Author: Matthias Granberry <[email protected]> Date: Sat Dec 7 14:32:49 2024 -0600 Configure Seeed Xiao S3 RX enable pin (meshtastic#5517) commit 4a34bf6 Author: Jonathan Bennett <[email protected]> Date: Sat Dec 7 10:29:49 2024 -0600 Add MACAddress to config.yaml (meshtastic#5506) * Add MACAddress to config.yaml * Better error handling on native, including failing to launch with blank MAC Address and real hardware. * Re-arrange Mac Address handling and add MACAddressSource * Bump portduino to remove macaddr function there --------- Co-authored-by: Ben Meadors <[email protected]> commit b99e57a Author: Ben Meadors <[email protected]> Date: Sat Dec 7 07:03:58 2024 -0600 Add popular nrf52 pro micro to the builds (meshtastic#5523) commit 46eab20 Author: Ben Meadors <[email protected]> Date: Sat Dec 7 05:30:59 2024 -0600 Lets try this again minus device ui commit 39b5fb0 Author: Ben Meadors <[email protected]> Date: Sat Dec 7 05:29:13 2024 -0600 Revert "Add heltec capsule back" This reverts commit fc16d93. commit fc16d93 Author: Ben Meadors <[email protected]> Date: Fri Dec 6 20:01:47 2024 -0600 Add heltec capsule back commit bac9fec Author: Tom Fifield <[email protected]> Date: Sat Dec 7 11:39:30 2024 +1100 fix nodeDB erase loop when free mem returns invalid value (0, -1). (meshtastic#5519) Co-authored-by: mverch67 <[email protected]> commit de77418 Author: broglep <[email protected]> Date: Thu Dec 5 13:02:10 2024 +0100 Always Announce MDNS meshtastic service (meshtastic#5503) * refactor server api port into define * always announce MDNS meshtastic service commit c3d6034 Author: GUVWAF <[email protected]> Date: Thu Dec 5 03:00:19 2024 +0100 Don't use channel index for encrypted packet (meshtastic#5509) * Don't use channel index for encrypted packet * Remove assert in `getKey`, set invalid key length So encrypting will fail without reboot * Reset channel to 0 when unable to encrypt Such that the NAK doesn't use the failing channel hash commit d3e3985 Author: Jonathan Bennett <[email protected]> Date: Wed Dec 4 12:15:17 2024 -0600 Fix minor typos in package workflows (meshtastic#5505) commit 8eca6a2 Author: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Date: Wed Dec 4 08:15:50 2024 -0600 [create-pull-request] automated change (meshtastic#5500) Co-authored-by: thebentern <[email protected]> commit e4f5367 Author: Mark Trevor Birss <[email protected]> Date: Wed Dec 4 13:39:02 2024 +0200 [Add] LR1110, LR1120 and LR1121 to linux native Portduino (meshtastic#5496) * Update main.cpp * Update PortduinoGlue.h * Update PortduinoGlue.cpp * Update PortduinoGlue.cpp * Update PortduinoGlue.cpp * Update main.cpp commit 10e1045 Author: noon92 <[email protected]> Date: Tue Dec 3 14:33:27 2024 +0200 Added femtofox configs (meshtastic#5477) * added femtofox configs * Rename bin/config.d/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml to bin/config.d/femtofox/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml * moved femtofox configs to subdir commit f846503 Author: Robert <[email protected]> Date: Tue Dec 3 06:30:19 2024 -0600 Extend Length of Source and Destination Node IDs Logged (meshtastic#5492) * show 8 chars for logging source and destination ids * extend legnth of source and destination nodes in log commit 85b2bad Author: dylanli <[email protected]> Date: Tue Dec 3 20:29:33 2024 +0800 Refact the macro definition of GPS initialization of GPSDEFAULTD_NOT_PRESENT and added seeeed Indicator to this sequence (meshtastic#5494) Co-authored-by: Ben Meadors <[email protected]> commit 7ad137b Author: Robert <[email protected]> Date: Tue Dec 3 06:28:46 2024 -0600 add nodeId to nodeinfo update log lines and removed redundant nodeinfo update log line (meshtastic#5493) commit 57ea6a2 Author: GUVWAF <[email protected]> Date: Tue Dec 3 13:21:24 2024 +0100 SimRadio: clean-up and emulate collisions (meshtastic#5487) * Clean up SimRadio and don't let it use PKC * Add collision emulation for SimRadio * Add stats from SimRadio to LocalStats * Make emulating collisions optional commit d00e0f6 Author: Ben Meadors <[email protected]> Date: Tue Dec 3 06:17:25 2024 -0600 Convert userprefs to a json file instead of header file which has to be included everywhere (meshtastic#5471) * WIP * Got string quoting and macro expansion working * Need the placeholder * Cleanup * Missed a user prefs reference * Update jsonc commit 594af0c Author: dylanli <[email protected]> Date: Mon Dec 2 16:59:34 2024 +0800 Update xiao_esp32 fully support L67K (meshtastic#5488) L67K module hardware changed
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Automated changes by create-pull-request GitHub action