Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Detect charging status by measuring current flow with configured INA …
…battery sensor (meshtastic#5271) * INA219 charging detection minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging * Update Power.cpp added comments and 2 extra defines to disable and swap detection direction * Update Power.cpp fix disabled case * move getCurrentMa() to new CurrentSensor class * INA219 charging detection minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging * Update Power.cpp added comments and 2 extra defines to disable and swap detection direction * Update Power.cpp fix disabled case * move getCurrentMa() to new CurrentSensor class * add INA3221 charging detection * RP2040: Update core; add mDNS support (meshtastic#5355) * Update arduino-pico core * RP2040: Add mDNS support * SimpleMDNS `begin` now returns a bool * Add `-g` option to `debug_build_flags` to link files for gdb * RAK11310 needs old platform as well * Change defines to specific architecture * Core version 4.2.1 is out * Add sudo to apt-get commands for Raspbian Build (meshtastic#5364) Without sudo, inadequate permissions to runs the commands meant the build was failing. * Typo fix in build_raspbian.yml (meshtastic#5365) s/sudp/sudo :(:(:( * Rework some things * Trunk * Separate littlefs bundle * version tags * Diag * Add littlefswebui * Bug fixed in ExternalNotificationModule (meshtastic#5375) While `nagging` setExternalState wasn't written to Buzzer & Vibra so output was never toggled. Possible fix for meshtastic#5348 * Cleanup static files from bad Web UI bundle on 2.5.13 release (meshtastic#5376) * Cleanup static files from bad Web UI bundle on 2.5.13 release * Check existence first * Esp32 is the only one we care about * Move some actions to after `startTransmit()` (meshtastic#5383) To minimize the time between channel scan and actual transmit * [create-pull-request] automated change (meshtastic#5380) Co-authored-by: thebentern <[email protected]> * Allows all 3 PKI keys to be added to userPrefs.h (meshtastic#4969) and a tool. (meshtastic#5368) * more userPrefs.h Added PKI Admin keys to userPrefs.h * Update userPrefs.h Allows all 3 PKI keys to be added to userPrefs.h (meshtastic#4969) * Update NodeDB.cpp Trunk * Update userPrefs.h Changed wording * Create base64_to_hex.py A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand. * more userPrefs.h Added PKI Admin keys to userPrefs.h * Update userPrefs.h Allows all 3 PKI keys to be added to userPrefs.h (meshtastic#4969) * Update NodeDB.cpp Trunk * Update userPrefs.h Changed wording * Create base64_to_hex.py A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand. * [create-pull-request] automated change (meshtastic#5388) Co-authored-by: thebentern <[email protected]> * add smiley emoji (meshtastic#5391) * add smiley emoji * clang-formatted * Anable trace route function on wismeshtap platform (meshtastic#5389) * fix 'symbal' typo (meshtastic#5395) * [create-pull-request] automated change (meshtastic#5399) Co-authored-by: thebentern <[email protected]> * /api/v1/fromradio: add OPTIONS handler for CORS. (meshtastic#5386) This avoids hitting the 404 Not Found handler, which breaks connection keep-alive, so this change fixes a big performance regression for Web Client in Chrome: meshtastic#5385 Tested on Heltec V3. Co-authored-by: Ben Meadors <[email protected]> * Make heart emoji usable (meshtastic#5403) * Create a specific hw_model for WisMesh Tap (meshtastic#5400) * Create a specific hw_model for WisMesh Tap * Trunk * HAS_ETHERNET * Remove it altogether * Don't need these either * Fix RTC time injection and consolidate position logic (meshtastic#5396) * Fix RTC time injection and consolidate position logic * Comment out unused var warning * Backerds * Update arduino-pico core to fix sporadic hangs (meshtastic#5406) * Update platform-raspberrypi also (meshtastic#5407) * Update arduino-pico core to fix sporadic hangs * Update platform-raspberrypi also * --web added to device-install(.sh/.bat) (meshtastic#5405) * Add --web * Update device-install.bat Forgot a "-" a few places. --------- Co-authored-by: Ben Meadors <[email protected]> * add GPS in indicator board (meshtastic#5411) * Fixed NMEA sentence issue in CalTopo as well as bug with no printing all of the nodes (meshtastic#5412) * --web littlefswebui-* typo fix (meshtastic#5416) * Add --web * Update device-install.bat Forgot a "-" a few places. * Typo fix. * Typo fix --------- Co-authored-by: Ben Meadors <[email protected]> Co-authored-by: GUVWAF <[email protected]> * Temporarily disable MDNS when MQTT is enabled (meshtastic#5418) Leads to a panic * Check for OkToMqtt flag presence before uplinking to MQTT (meshtastic#5413) * Check for oktomqtt flag presence before uplinking to MQTT * Move to mqtt->onSend * Temetry can respond to want-response for LocalStats variant (meshtastic#5414) * Seems like the last DIY board that's not "extra" (meshtastic#5420) * Cherry pick tdeck fixes (meshtastic#5422) * Try-fix (workaround) T-Deck audio crash * set T-Deck audio to unused 48 (mem mclk) * swap mclk to gpio 21 * dreamcatcher: assign GPIO44 to audio mclk --------- Co-authored-by: mverch67 <[email protected]> * add canned message and keyboard in indicator board (meshtastic#5410) * add canned message and keyboard in indicator board * Added virtual keyboard macro and enabled for Indicator * Cleanup macros by applying USE_VIRTUAL_KEYBOARD and DISPLAY_CLOCK_FRAME --------- Co-authored-by: Ben Meadors <[email protected]> * Update build-native.sh (meshtastic#5415) * Update build-native.sh Device-install.sh and device-update.sh are not used on native platform, skip copying to release directory after build and copy native-install.sh and native-run.sh instead. * Update build-native.sh Skip native-run.sh copy * Cleans up visibility in GPS.h (meshtastic#5426) Signed-off-by: Christopher Hoover <[email protected]> * Fix admin key loading from userPrefs.h (meshtastic#5417) * Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28 * Merge PR meshtastic#420 * Fixed double and missing Default class. * Use correct format specifier and fixed typo. * Removed duplicate code. * Fix error: #if with no expression * Fix warning: extra tokens at end of #endif directive. * Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board. * Fix deprecated macros. * Set RP2040 in dormant mode when deep sleep is triggered. * Fix array out of bounds read. * Admin key count needs to be set otherwise the key will be zero loaded after reset. * Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible. * Remove log spam when reading INA voltage sensor. * Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots. * Removed newlines from log. --------- Co-authored-by: Ben Meadors <[email protected]> Co-authored-by: Thomas Göttgens <[email protected]> * try to detect dfrobot station to tell it apart from an ublox gps. (meshtastic#5393) * Remove BMA-423 and STK8X by default (meshtastic#5429) * Remove BMA-423 by default * STK * Wrong macro * Helps if you include the file * [create-pull-request] automated change (meshtastic#5431) Co-authored-by: caveman99 <[email protected]> * Support for the ClimateGuard RadSens Geiger-Muller tube (meshtastic#5425) * fixes meshtastic#5434 (meshtastic#5435) * update libpax * fix interval init * Fix memory leaks by adding missing `free()` calls before early returns in `MQTT::onReceive` (meshtastic#5439) This fix addresses memory leaks in the `MQTT::onReceive` function by ensuring that dynamically allocated resources (`e.channel_id`, `e.gateway_id` and `e.packet`) are properly freed before each early return. Previously, these resources were only freed at the end of the function, leaving them unhandled in certain exit paths. Adding the missing `free()` calls prevents memory leaks and ensures proper resource cleanup in all scenarios. * Removing 1.0 legacy boards from releases and completely removing Heltec wireless capsule from support (meshtastic#5436) Co-authored-by: Tom Fifield <[email protected]> * A second round of cleanup on GPS.h. (meshtastic#5433) * Move yet more stuff out of GPS.h and into file scope. * Protect code macros from eating semicolons. * Remove unused (and unimplemented) getDOPString. * clang-format with project style file on affected files. Signed-off-by: Christopher Hoover <[email protected]> * enable MQTT with TLS on RPi picow (meshtastic#5442) Co-authored-by: Ben Meadors <[email protected]> * Don't powersave on Wifi (meshtastic#5443) * Don't go into light sleep with wifi enabled * Move * Trunk * Revert "Seems like the last DIY board that's not "extra" (meshtastic#5420)" (meshtastic#5446) This reverts commit e6fb6b1. * Actually gunzip all the files when building a .deb (meshtastic#5449) * [create-pull-request] automated change (meshtastic#5457) Co-authored-by: thebentern <[email protected]> * Cleanup i2c scan logs and macro to save some bytes and remain consistent (meshtastic#5455) * Cleanup i2c scan logs and macro to save some bytes and remain consistent * Functions are better than macros * Exclude i2c scan for STM32 * Useless log * Clean up some inline functions (meshtastic#5454) * Use isWithinTimespanMs to avoid refererence to NodeDb instance inside of NodeDb (meshtastic#5453) * fix cors for meshtasticd to allow use of cross origin clients (meshtastic#5463) * Remove ATECC crypto chip placeholder code (meshtastic#5461) * GPS.h cleanups round 3. (meshtastic#5447) * GPS.h cleanups round 3. No effective behavior change. Protected members can be private so make it so. (Supporting subclasses needs a lot more work.) Moves uBloxGnssModelInfo into file scope. Moves uBloxProtocolVersion into uBloxGnssModelInfo. Moves baud rate arrays into file scope. Removes unused/ unimplemented powerStateToString. Signed-off-by: Christopher Hoover <[email protected]> * Trunk Format. --------- Signed-off-by: Christopher Hoover <[email protected]> Co-authored-by: Tom Fifield <[email protected]> * Fix ukrainian fonts (meshtastic#5468) * FIX: rollback to !4624 * UPDATE: new 16 and 24 UA Fonts and fixes * fix: Solve the lightsleep crash problem via disable lightsleep for indicator. (meshtastic#5470) * Trunk * Warnings and log cleanup (meshtastic#5472) * Don't log if keyboard not found * Signed comparison issue * [create-pull-request] automated change (meshtastic#5475) Co-authored-by: thebentern <[email protected]> * Adds libusb dev package to Raspbian build steps (meshtastic#5480) * [create-pull-request] automated change (meshtastic#5478) Co-authored-by: thebentern <[email protected]> * Portduino fixes (meshtastic#5479) * Set config.yaml defaults even if General is missing * Unsigned values should get %u in logging * Update arduino-pico core and remove MDNS restriction (meshtastic#5483) * Update xiao_esp32 fully support L67K (meshtastic#5488) L67K module hardware changed * Convert userprefs to a json file instead of header file which has to be included everywhere (meshtastic#5471) * WIP * Got string quoting and macro expansion working * Need the placeholder * Cleanup * Missed a user prefs reference * Update jsonc * SimRadio: clean-up and emulate collisions (meshtastic#5487) * Clean up SimRadio and don't let it use PKC * Add collision emulation for SimRadio * Add stats from SimRadio to LocalStats * Make emulating collisions optional * add nodeId to nodeinfo update log lines and removed redundant nodeinfo update log line (meshtastic#5493) * Refact the macro definition of GPS initialization of GPSDEFAULTD_NOT_PRESENT and added seeeed Indicator to this sequence (meshtastic#5494) Co-authored-by: Ben Meadors <[email protected]> * Extend Length of Source and Destination Node IDs Logged (meshtastic#5492) * show 8 chars for logging source and destination ids * extend legnth of source and destination nodes in log * Added femtofox configs (meshtastic#5477) * added femtofox configs * Rename bin/config.d/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml to bin/config.d/femtofox/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml * moved femtofox configs to subdir * [Add] LR1110, LR1120 and LR1121 to linux native Portduino (meshtastic#5496) * Update main.cpp * Update PortduinoGlue.h * Update PortduinoGlue.cpp * Update PortduinoGlue.cpp * Update PortduinoGlue.cpp * Update main.cpp * [create-pull-request] automated change (meshtastic#5500) Co-authored-by: thebentern <[email protected]> * Fix minor typos in package workflows (meshtastic#5505) * Don't use channel index for encrypted packet (meshtastic#5509) * Don't use channel index for encrypted packet * Remove assert in `getKey`, set invalid key length So encrypting will fail without reboot * Reset channel to 0 when unable to encrypt Such that the NAK doesn't use the failing channel hash * Always Announce MDNS meshtastic service (meshtastic#5503) * refactor server api port into define * always announce MDNS meshtastic service * fix nodeDB erase loop when free mem returns invalid value (0, -1). (meshtastic#5519) Co-authored-by: mverch67 <[email protected]> * Add heltec capsule back * Revert "Add heltec capsule back" This reverts commit fc16d93. * Lets try this again minus device ui * Add popular nrf52 pro micro to the builds (meshtastic#5523) * Add MACAddress to config.yaml (meshtastic#5506) * Add MACAddress to config.yaml * Better error handling on native, including failing to launch with blank MAC Address and real hardware. * Re-arrange Mac Address handling and add MACAddressSource * Bump portduino to remove macaddr function there --------- Co-authored-by: Ben Meadors <[email protected]> * Configure Seeed Xiao S3 RX enable pin (meshtastic#5517) * Create OpenWRT_One_mikroBUS_sx1262.yaml (meshtastic#5529) * tlora_v2_1_16: Unset BUTTON_PIN and BUTTON_NEED_PULLUP (meshtastic#5535) Unset BUTTON_PIN and BUTTON_NEED_PULLUP as the board ships without a user button. Devices and users expecting a button on GPIO12 have to set [GPIO for user button](https://meshtastic.org/docs/configuration/radio/device/#gpio-for-user-button) to 12 (or any GPIO pin the momentary switch was connected to) to restore functionality. Signed-off-by: Andrew Yong <[email protected]> * [create-pull-request] automated change (meshtastic#5530) Co-authored-by: thebentern <[email protected]> * Fix detection for some RadSens hardware versions (meshtastic#5542) Co-authored-by: Jake-B <[email protected]> * Initialize dmac array to nulls (meshtastic#5538) * Initialize dmac array to nulls * Use std::cout for print before console is init. * Update OpenWRT_One_mikroBUS_sx1262.yaml (meshtastic#5544) * Add portduino-buildroot variant (meshtastic#5540) * Add portduino-buildroot variant * Update platform-native for platform-buildroot * portduino-buildroot: Define c standard (meshtastic#5547) * Portduino: Move meshtasticd/web out of /usr/share/doc/ (meshtastic#5548) * Portduino: fix transitional symlinks (meshtastic#5550) * Windows Support - Trunk and Platformio (meshtastic#5397) (meshtastic#5518) * Add support for GPG * Add usb device support * Add trunk.io to devcontainer * Trunk things * trunk fmt * formatting * fix trivy/DS002, checkov/CKV_DOCKER_3 * hide docker extension popup * fix trivy/DS026, checkov/CKV_DOCKER_2 Co-authored-by: Kalle Lilja <[email protected]> * Synch minor changes from TFT branch (meshtastic#5520) * Synch minor changes from TFT branch Includes: * New nordicnrf52 minor version (10.5.0 --> 10.6.0) * Optimisations for T_DECK * preparation for MESH_TAB * add ext notification module to portduino --------- Co-authored-by: mverch67 <[email protected]> * DIO3_TCXO_VOLTAGE in config.yaml can now take an exact voltage (meshtastic#5558) * Support TLORA_V3.0 (meshtastic#5563) - Support TLORA_V3.0. Update of the legendary 2.1_1.6.1 with solar charger, TCXO and IPEX connector. - 'extra' some short-lived EOL intermediate boards in that range. If possible use T3S3 instead of all of these! - update trunk to latest version * Create OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml (meshtastic#5564) * Portduino: fix setting hwId via argument (meshtastic#5565) * INA219 charging detection minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging * Update Power.cpp added comments and 2 extra defines to disable and swap detection direction * Trunk Fixes * Add INA226 support --------- Signed-off-by: Christopher Hoover <[email protected]> Signed-off-by: Andrew Yong <[email protected]> Co-authored-by: Ben Meadors <[email protected]> Co-authored-by: Jonathan Bennett <[email protected]> Co-authored-by: GUVWAF <[email protected]> Co-authored-by: Tom Fifield <[email protected]> Co-authored-by: Michael Gjelsø <[email protected]> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <[email protected]> Co-authored-by: jcyrio <[email protected]> Co-authored-by: Daniel.Cao <[email protected]> Co-authored-by: Catalin Patulea <[email protected]> Co-authored-by: dylanli <[email protected]> Co-authored-by: mverch67 <[email protected]> Co-authored-by: madeofstown <[email protected]> Co-authored-by: Christopher Hoover <[email protected]> Co-authored-by: Mictronics <[email protected]> Co-authored-by: Thomas Göttgens <[email protected]> Co-authored-by: caveman99 <[email protected]> Co-authored-by: jake-b <[email protected]> Co-authored-by: César de Tassis Filho <[email protected]> Co-authored-by: Tomas Dubec <[email protected]> Co-authored-by: Liam Cottle <[email protected]> Co-authored-by: panaceya <[email protected]> Co-authored-by: virgil <[email protected]> Co-authored-by: Robert <[email protected]> Co-authored-by: noon92 <[email protected]> Co-authored-by: Mark Trevor Birss <[email protected]> Co-authored-by: broglep <[email protected]> Co-authored-by: Matthias Granberry <[email protected]> Co-authored-by: Andrew Yong <[email protected]> Co-authored-by: Jake-B <[email protected]> Co-authored-by: Austin <[email protected]> Co-authored-by: Kalle Lilja <[email protected]>
- Loading branch information
33 people
authored
Dec 22, 2024
1 parent
fa1a1fd
commit 80fc0f2