This project is NOT completed, nor is it tested yet. I would not recommend building it, unless you've gone over everything and too agree it will work, even then that's do it at your own risk!
This is a project to automatically make string art from an input image. I got the idea for this project from this YouTube video by Virtually Passed. The logic for generating the sequences is based off this gist by kaspermeerts, implemented in my threadArt python library.
Not created yet
NOT A FULL LIST
- 1x 2'x2' Sheet of 1/2" plywood
- 3x 4.25” long 2x4
- 2x 6” long 2x4
- 1x 8” 2x4
- 1x 9.5” 2x4
- Bunch of screws (Types not decided yet)
- 40mm x 0.45mm Sewing Needle
- Ender 3 Pro X-Axis stepper motor
- 3D printer & filament
- MG996R with circular horn
- Arduino Uno
- TMC2209 Stepper motor driver
- 12v 5a Power supply
- Simthread Embroidery Thread
Download the STL files from /3d/StringBotV1
Printed on an Ender 3 S1 Pro running octoprint.
- Filament: Generic PLA
- Hotend Temperature: 200c
- Bed Temperature: 60c
- Infill: 20%
- Slicer: PrusaSlicer 2.5.2
- Supports: Off
| Name | Quantity | Material | Infill | Supports | Orientation |
|---|---|---|---|---|---|
| N/A | N/A | N/A | N/A | N/A | N/A |