Automatically enable cross-crate inlining for small functions #116505

saethlin · 2023-10-07T04:37:50Z

This is basically reviving #70550

The #[inline] attribute can have a significant impact on code generation or runtime performance (because it enables inlining between CGUs where it would normally not happen) and also on compile-time performance (because it enables MIR inlining). But it has to be added manually, which is awkward.

This PR factors whether a DefId is cross-crate inlinable into a query, and replaces all uses of CodegenFnAttrs::requests_inline with this new query. The new query incorporates all the other logic that is used to determine whether a Def should be treated as cross-crate-inlinable, and as a last step inspects the function's optimized_mir to determine if it should be treated as cross-crate-inlinable.

The heuristic implemented here is deliberately conservative; we only infer inlinability for functions whose optimized_mir does not contain any calls or asserts. I plan to study adjusting the cost model later, but for now the compile time implications of this change are so significant that I think this very crude heuristic is well worth landing.

rustbot · 2023-10-07T04:37:56Z

r? @petrochenkov

(rustbot has picked a reviewer for you, use r? to override)

saethlin · 2023-10-07T04:38:04Z

@bors try @rust-timer queue

bors · 2023-10-07T04:39:14Z

⌛ Trying commit 64f45aa with merge f1cbf12...

Automatically enable cross-crate inlining for small functions This is a work-in-progress. For example I have not thought at all about the cost model and I am sure that the threshold is too high. But I'm curious to know how this looks in perf. It certainly has some unique effects on codegen.

bors · 2023-10-07T05:54:55Z

☀️ Try build successful - checks-actions
Build commit: f1cbf12 (f1cbf125bf7c5bdb502d2c6359397a8d7e4fe068)

rust-timer · 2023-10-07T12:31:03Z

Finished benchmarking commit (f1cbf12): comparison URL.

Overall result: ❌✅ regressions and improvements - ACTION NEEDED

Benchmarking this pull request likely means that it is perf-sensitive, so we're automatically marking it as not fit for rolling up. While you can manually mark this PR as fit for rollup, we strongly recommend not doing so since this PR may lead to changes in compiler perf.

Next Steps: If you can justify the regressions found in this try perf run, please indicate this with @rustbot label: +perf-regression-triaged along with sufficient written justification. If you cannot justify the regressions please fix the regressions and do another perf run. If the next run shows neutral or positive results, the label will be automatically removed.

@bors rollup=never
@rustbot label: -S-waiting-on-perf +perf-regression

Instruction count

This is a highly reliable metric that was used to determine the overall result at the top of this comment.

	mean	range	count
Regressions ❌ (primary)	28.5%	[0.2%, 610.4%]	102
Regressions ❌ (secondary)	62.8%	[0.3%, 2246.9%]	66
Improvements ✅ (primary)	-3.8%	[-56.5%, -0.2%]	136
Improvements ✅ (secondary)	-7.5%	[-85.5%, -0.3%]	151
All ❌✅ (primary)	10.1%	[-56.5%, 610.4%]	238

Max RSS (memory usage)

Results

This is a less reliable metric that may be of interest but was not used to determine the overall result at the top of this comment.

	mean	range	count
Regressions ❌ (primary)	11.3%	[0.5%, 72.7%]	90
Regressions ❌ (secondary)	16.3%	[0.7%, 100.1%]	86
Improvements ✅ (primary)	-5.7%	[-15.3%, -0.9%]	9
Improvements ✅ (secondary)	-5.0%	[-18.0%, -0.7%]	36
All ❌✅ (primary)	9.8%	[-15.3%, 72.7%]	99

Cycles

Results

This is a less reliable metric that may be of interest but was not used to determine the overall result at the top of this comment.

	mean	range	count
Regressions ❌ (primary)	32.5%	[0.8%, 565.9%]	98
Regressions ❌ (secondary)	70.9%	[1.4%, 1900.7%]	64
Improvements ✅ (primary)	-14.9%	[-60.4%, -0.9%]	27
Improvements ✅ (secondary)	-12.5%	[-85.1%, -1.9%]	78
All ❌✅ (primary)	22.2%	[-60.4%, 565.9%]	125

Binary size

Results

This is a less reliable metric that may be of interest but was not used to determine the overall result at the top of this comment.

	mean	range	count
Regressions ❌ (primary)	4.5%	[0.2%, 29.4%]	107
Regressions ❌ (secondary)	6.8%	[0.1%, 70.1%]	59
Improvements ✅ (primary)	-6.9%	[-30.5%, -0.1%]	56
Improvements ✅ (secondary)	-14.8%	[-77.0%, -2.5%]	83
All ❌✅ (primary)	0.5%	[-30.5%, 29.4%]	163

Bootstrap: 625.502s -> 742.509s (18.71%)
Artifact size: 270.64 MiB -> 275.71 MiB (1.87%)

saethlin · 2023-10-07T15:26:23Z

This should be less silly than the last one because now we don't do the per-CGU thing for incr builds. And I also halved the default threshold.

@bors try @rust-timer queue

bors · 2023-10-07T15:27:32Z

⌛ Trying commit aac4020 with merge 26bbeca...

Automatically enable cross-crate inlining for small functions This is a work-in-progress. For example I have not thought at all about the cost model and I am sure that the threshold is too high. But I'm curious to know how this looks in perf. It certainly has some unique effects on codegen.

bors · 2023-10-07T16:42:25Z

☀️ Try build successful - checks-actions
Build commit: 26bbeca (26bbeca8f2e9d38e46c985ab930a46c608dd85f8)

rust-timer · 2023-10-08T01:12:57Z

Finished benchmarking commit (26bbeca): comparison URL.

Overall result: ❌✅ regressions and improvements - ACTION NEEDED

Benchmarking this pull request likely means that it is perf-sensitive, so we're automatically marking it as not fit for rolling up. While you can manually mark this PR as fit for rollup, we strongly recommend not doing so since this PR may lead to changes in compiler perf.

Next Steps: If you can justify the regressions found in this try perf run, please indicate this with @rustbot label: +perf-regression-triaged along with sufficient written justification. If you cannot justify the regressions please fix the regressions and do another perf run. If the next run shows neutral or positive results, the label will be automatically removed.

@bors rollup=never
@rustbot label: -S-waiting-on-perf +perf-regression

Instruction count

This is a highly reliable metric that was used to determine the overall result at the top of this comment.

	mean	range	count
Regressions ❌ (primary)	21.8%	[0.2%, 346.9%]	153
Regressions ❌ (secondary)	32.7%	[0.2%, 456.2%]	43
Improvements ✅ (primary)	-2.7%	[-40.3%, -0.2%]	86
Improvements ✅ (secondary)	-5.3%	[-26.4%, -0.1%]	157
All ❌✅ (primary)	13.0%	[-40.3%, 346.9%]	239

Max RSS (memory usage)

Results

This is a less reliable metric that may be of interest but was not used to determine the overall result at the top of this comment.

	mean	range	count
Regressions ❌ (primary)	9.3%	[0.5%, 71.9%]	106
Regressions ❌ (secondary)	6.7%	[0.5%, 32.1%]	45
Improvements ✅ (primary)	-14.0%	[-21.1%, -3.1%]	4
Improvements ✅ (secondary)	-3.6%	[-6.5%, -0.4%]	12
All ❌✅ (primary)	8.4%	[-21.1%, 71.9%]	110

Cycles

Results

This is a less reliable metric that may be of interest but was not used to determine the overall result at the top of this comment.

	mean	range	count
Regressions ❌ (primary)	25.5%	[0.9%, 325.3%]	137
Regressions ❌ (secondary)	34.1%	[1.9%, 350.8%]	42
Improvements ✅ (primary)	-12.1%	[-37.9%, -0.9%]	15
Improvements ✅ (secondary)	-8.1%	[-20.6%, -1.2%]	96
All ❌✅ (primary)	21.8%	[-37.9%, 325.3%]	152

Binary size

Results

This is a less reliable metric that may be of interest but was not used to determine the overall result at the top of this comment.

	mean	range	count
Regressions ❌ (primary)	12.3%	[0.0%, 77.9%]	116
Regressions ❌ (secondary)	6.0%	[0.1%, 52.2%]	56
Improvements ✅ (primary)	-3.9%	[-16.6%, -0.3%]	46
Improvements ✅ (secondary)	-8.9%	[-19.0%, -0.5%]	83
All ❌✅ (primary)	7.7%	[-16.6%, 77.9%]	162

Bootstrap: 622.673s -> 704.606s (13.16%)
Artifact size: 270.68 MiB -> 273.48 MiB (1.04%)

The culprit lied in rust-lang/rust#116505 In short, with default features turned off, main was trivial enough to be marked as inline function automatically which then made the symbol weak. Since nobody was referencing it, it got stripped away. Marking main in default-features=false config as #[inline(never)] or replacing 1 + 1 in it's body with a simple println!("foo") call (to make the main function sophisticated enough not to be subject to the new automatic marking as inline) makes the test pass again.

which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822

* rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR #3039.

which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822

briansmith · 2024-01-12T00:30:52Z

With this change, is there any convenient way for a crate to indicate that it should be compiled with full optimizations but none of its public API should be inlined unless marked #[inline] specifically? Or do we have to denote every single function as #[inline(never)]? And is #[inline(never)] on a function sufficient to ensure it won't ever be inlined into callers?

saethlin · 2024-01-12T01:04:00Z

And is #[inline(never)] on a function sufficient to ensure it won't ever be inlined into callers?

That attribute is documented as a hint, so no. I do not think we have a language feature that guarantees what you are asking for.

It seems like a plausible thing to add but that's a bit outside my area.

* rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR zellij-org#3039.

which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822

* refactor: Simplify transfer_rows_from_viewport_to_lines_above next_lines is always consolidated to a single Row, which immediately gets removed - we can remove some dead code as a result * perf: Batch remove rows from the viewport for performance Given a 1MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s * perf: Optimize Row::drain_until by splitting chars in one step Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s * refactor: Simplify `if let` into a `.map` * refactor: There are only new saved coordinates when there were old ones * refactor: Unify viewport transfer: use common variable names * fix: Use same saved cursor logic in height resize as width See #2182 for original introduction that only added it in one branch, this fixes an issue where the saved cursor was incorrectly reset when the real cursor was * fix: Correct saved+real cursor calculations when reflowing long lines * fix: Don't create canonical lines if cursor ends on EOL after resize Previously if a 20 character line were split into two 10 character lines, the cursor would be placed on the line after the two lines. New characters would then be treated as a new canonical line. This commit fixes this by biasing cursors to the end of the previous line. * fix: for cursor index calculation in lines that are already wrapped * chore: test for real/saved cursor position being handled separately * chore: Apply cargo format * chore(repo): update issue templates * Bump rust version to 1.75.0 (#3039) * rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR #3039. * feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (#3066) * prototype - working with message from the cli * prototype - pipe from the CLI to plugins * prototype - pipe from the CLI to plugins and back again * prototype - working with better cli interface * prototype - working after removing unused stuff * prototype - working with launching plugin if it is not launched, also fixed event ordering * refactor: change message to cli-message * prototype - allow plugins to send messages to each other * fix: allow cli messages to send plugin parameters (and implement backpressure) * fix: use input_pipe_id to identify cli pipes instead of their message name * fix: come cleanups and add skip_cache parameter * fix: pipe/client-server communication robustness * fix: leaking messages between plugins while loading * feat: allow plugins to specify how a new plugin instance is launched when sending messages * fix: add permissions * refactor: adjust cli api * fix: improve cli plugin loading error messages * docs: cli pipe * fix: take plugin configuration into account when messaging between plugins * refactor: pipe message protobuf interface * refactor: update(event) -> pipe * refactor - rename CliMessage to CliPipe * fix: add is_private to pipes and change some naming * refactor - cli client * refactor: various cleanups * style(fmt): rustfmt * fix(pipes): backpressure across multiple plugins * style: some cleanups * style(fmt): rustfmt * style: fix merge conflict mistake * style(wording): clarify pipe permission * docs(changelog): introduce pipes * fix: add some robustness and future proofing * fix e2e tests --------- Co-authored-by: Aram Drevekenin <[email protected]> Co-authored-by: har7an <[email protected]>

* rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR zellij-org#3039.

…3032) * refactor: Simplify transfer_rows_from_viewport_to_lines_above next_lines is always consolidated to a single Row, which immediately gets removed - we can remove some dead code as a result * perf: Batch remove rows from the viewport for performance Given a 1MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s * perf: Optimize Row::drain_until by splitting chars in one step Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s * refactor: Simplify `if let` into a `.map` * refactor: There are only new saved coordinates when there were old ones * refactor: Unify viewport transfer: use common variable names * fix: Use same saved cursor logic in height resize as width See zellij-org#2182 for original introduction that only added it in one branch, this fixes an issue where the saved cursor was incorrectly reset when the real cursor was * fix: Correct saved+real cursor calculations when reflowing long lines * fix: Don't create canonical lines if cursor ends on EOL after resize Previously if a 20 character line were split into two 10 character lines, the cursor would be placed on the line after the two lines. New characters would then be treated as a new canonical line. This commit fixes this by biasing cursors to the end of the previous line. * fix: for cursor index calculation in lines that are already wrapped * chore: test for real/saved cursor position being handled separately * chore: Apply cargo format * chore(repo): update issue templates * Bump rust version to 1.75.0 (zellij-org#3039) * rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR zellij-org#3039. * feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (zellij-org#3066) * prototype - working with message from the cli * prototype - pipe from the CLI to plugins * prototype - pipe from the CLI to plugins and back again * prototype - working with better cli interface * prototype - working after removing unused stuff * prototype - working with launching plugin if it is not launched, also fixed event ordering * refactor: change message to cli-message * prototype - allow plugins to send messages to each other * fix: allow cli messages to send plugin parameters (and implement backpressure) * fix: use input_pipe_id to identify cli pipes instead of their message name * fix: come cleanups and add skip_cache parameter * fix: pipe/client-server communication robustness * fix: leaking messages between plugins while loading * feat: allow plugins to specify how a new plugin instance is launched when sending messages * fix: add permissions * refactor: adjust cli api * fix: improve cli plugin loading error messages * docs: cli pipe * fix: take plugin configuration into account when messaging between plugins * refactor: pipe message protobuf interface * refactor: update(event) -> pipe * refactor - rename CliMessage to CliPipe * fix: add is_private to pipes and change some naming * refactor - cli client * refactor: various cleanups * style(fmt): rustfmt * fix(pipes): backpressure across multiple plugins * style: some cleanups * style(fmt): rustfmt * style: fix merge conflict mistake * style(wording): clarify pipe permission * docs(changelog): introduce pipes * fix: add some robustness and future proofing * fix e2e tests --------- Co-authored-by: Aram Drevekenin <[email protected]> Co-authored-by: har7an <[email protected]>

… reducing size of TerminalCharacter (#3043) * refactor: Simplify transfer_rows_from_viewport_to_lines_above next_lines is always consolidated to a single Row, which immediately gets removed - we can remove some dead code as a result * perf: Batch remove rows from the viewport for performance Given a 1MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s * perf: Optimize Row::drain_until by splitting chars in one step Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s * refactor: Simplify `if let` into a `.map` * refactor: There are only new saved coordinates when there were old ones * refactor: Unify viewport transfer: use common variable names * fix: Use same saved cursor logic in height resize as width See #2182 for original introduction that only added it in one branch, this fixes an issue where the saved cursor was incorrectly reset when the real cursor was * fix: Correct saved+real cursor calculations when reflowing long lines * fix: Don't create canonical lines if cursor ends on EOL after resize Previously if a 20 character line were split into two 10 character lines, the cursor would be placed on the line after the two lines. New characters would then be treated as a new canonical line. This commit fixes this by biasing cursors to the end of the previous line. * fix: for cursor index calculation in lines that are already wrapped * chore: test for real/saved cursor position being handled separately * chore: Apply cargo format * refactor: Unify viewport transfer: transfer + cursor update together * perf: Reduce size of TerminalCharacter from 72 to 60 bytes With a 10MB single line catted into a fresh terminal, VmRSS goes from 964092 kB to 874020 kB (as reported by /proc/<pid>/status) before/after this patch Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~15s to ~12.5s * fix(build): Don't unconditionally rebuild zellij-utils * refactor: Remove Copy impl on TerminalCharacter * perf: Rc styles to reduce TerminalCharacter from 60 to 24 bytes With a 10MB single line catted into a fresh terminal, VmRSS goes from 845156 kB to 478396 kB (as reported by /proc/<pid>/status) before/after this patch Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~12.5s to ~7s * perf: Remove RcCharacterStyles::Default, allow enum niche optimisation This reduces TerminalCharacter from 24 to 16 bytes With a 10MB single line catted into a fresh terminal, VmRSS goes from 478396 kB to 398108 kB (as reported by /proc/<pid>/status) before/after this patch Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~7s to ~4.75s * docs: link anchor omission from reset_all is deliberate reset_all is only used from ansi params, and ansi params don't control link anchor * fix: Remove no-op on variable that gets immediately dropped * refactor: Simplify replace_character_at logic The original condition checked absolute_x_index was in bounds, then used the index to manipulate it. This is equivalent to getting a ref to the character at that position and manipulating directly * chore: Run xtask format * chore(repo): update issue templates * Bump rust version to 1.75.0 (#3039) * rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR #3039. * feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (#3066) * prototype - working with message from the cli * prototype - pipe from the CLI to plugins * prototype - pipe from the CLI to plugins and back again * prototype - working with better cli interface * prototype - working after removing unused stuff * prototype - working with launching plugin if it is not launched, also fixed event ordering * refactor: change message to cli-message * prototype - allow plugins to send messages to each other * fix: allow cli messages to send plugin parameters (and implement backpressure) * fix: use input_pipe_id to identify cli pipes instead of their message name * fix: come cleanups and add skip_cache parameter * fix: pipe/client-server communication robustness * fix: leaking messages between plugins while loading * feat: allow plugins to specify how a new plugin instance is launched when sending messages * fix: add permissions * refactor: adjust cli api * fix: improve cli plugin loading error messages * docs: cli pipe * fix: take plugin configuration into account when messaging between plugins * refactor: pipe message protobuf interface * refactor: update(event) -> pipe * refactor - rename CliMessage to CliPipe * fix: add is_private to pipes and change some naming * refactor - cli client * refactor: various cleanups * style(fmt): rustfmt * fix(pipes): backpressure across multiple plugins * style: some cleanups * style(fmt): rustfmt * style: fix merge conflict mistake * style(wording): clarify pipe permission * docs(changelog): introduce pipes * xtask: Disable pusing during publish (#3040) * xtask: Add `--no-push` flag to `publish` which can be used when simulating releases to work without a writable git fork of the zellij code. * xtask: Fix borrow issues * xtask/pipe: Require lockfile in publish to avoid errors from invalid dependency versions. * CHANGELOG: Add PR #3040. * fix(terminal): some real/saved cursor bugs during resize (#3032) * refactor: Simplify transfer_rows_from_viewport_to_lines_above next_lines is always consolidated to a single Row, which immediately gets removed - we can remove some dead code as a result * perf: Batch remove rows from the viewport for performance Given a 1MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s * perf: Optimize Row::drain_until by splitting chars in one step Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s * refactor: Simplify `if let` into a `.map` * refactor: There are only new saved coordinates when there were old ones * refactor: Unify viewport transfer: use common variable names * fix: Use same saved cursor logic in height resize as width See #2182 for original introduction that only added it in one branch, this fixes an issue where the saved cursor was incorrectly reset when the real cursor was * fix: Correct saved+real cursor calculations when reflowing long lines * fix: Don't create canonical lines if cursor ends on EOL after resize Previously if a 20 character line were split into two 10 character lines, the cursor would be placed on the line after the two lines. New characters would then be treated as a new canonical line. This commit fixes this by biasing cursors to the end of the previous line. * fix: for cursor index calculation in lines that are already wrapped * chore: test for real/saved cursor position being handled separately * chore: Apply cargo format * chore(repo): update issue templates * Bump rust version to 1.75.0 (#3039) * rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR #3039. * feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (#3066) * prototype - working with message from the cli * prototype - pipe from the CLI to plugins * prototype - pipe from the CLI to plugins and back again * prototype - working with better cli interface * prototype - working after removing unused stuff * prototype - working with launching plugin if it is not launched, also fixed event ordering * refactor: change message to cli-message * prototype - allow plugins to send messages to each other * fix: allow cli messages to send plugin parameters (and implement backpressure) * fix: use input_pipe_id to identify cli pipes instead of their message name * fix: come cleanups and add skip_cache parameter * fix: pipe/client-server communication robustness * fix: leaking messages between plugins while loading * feat: allow plugins to specify how a new plugin instance is launched when sending messages * fix: add permissions * refactor: adjust cli api * fix: improve cli plugin loading error messages * docs: cli pipe * fix: take plugin configuration into account when messaging between plugins * refactor: pipe message protobuf interface * refactor: update(event) -> pipe * refactor - rename CliMessage to CliPipe * fix: add is_private to pipes and change some naming * refactor - cli client * refactor: various cleanups * style(fmt): rustfmt * fix(pipes): backpressure across multiple plugins * style: some cleanups * style(fmt): rustfmt * style: fix merge conflict mistake * style(wording): clarify pipe permission * docs(changelog): introduce pipes * fix: add some robustness and future proofing * fix e2e tests --------- Co-authored-by: Aram Drevekenin <[email protected]> Co-authored-by: har7an <[email protected]> * fix integer overflow again (oops) --------- Co-authored-by: Aram Drevekenin <[email protected]> Co-authored-by: har7an <[email protected]>

* rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR zellij-org#3039.

…3032) * refactor: Simplify transfer_rows_from_viewport_to_lines_above next_lines is always consolidated to a single Row, which immediately gets removed - we can remove some dead code as a result * perf: Batch remove rows from the viewport for performance Given a 1MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s * perf: Optimize Row::drain_until by splitting chars in one step Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s * refactor: Simplify `if let` into a `.map` * refactor: There are only new saved coordinates when there were old ones * refactor: Unify viewport transfer: use common variable names * fix: Use same saved cursor logic in height resize as width See zellij-org#2182 for original introduction that only added it in one branch, this fixes an issue where the saved cursor was incorrectly reset when the real cursor was * fix: Correct saved+real cursor calculations when reflowing long lines * fix: Don't create canonical lines if cursor ends on EOL after resize Previously if a 20 character line were split into two 10 character lines, the cursor would be placed on the line after the two lines. New characters would then be treated as a new canonical line. This commit fixes this by biasing cursors to the end of the previous line. * fix: for cursor index calculation in lines that are already wrapped * chore: test for real/saved cursor position being handled separately * chore: Apply cargo format * chore(repo): update issue templates * Bump rust version to 1.75.0 (zellij-org#3039) * rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR zellij-org#3039. * feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (zellij-org#3066) * prototype - working with message from the cli * prototype - pipe from the CLI to plugins * prototype - pipe from the CLI to plugins and back again * prototype - working with better cli interface * prototype - working after removing unused stuff * prototype - working with launching plugin if it is not launched, also fixed event ordering * refactor: change message to cli-message * prototype - allow plugins to send messages to each other * fix: allow cli messages to send plugin parameters (and implement backpressure) * fix: use input_pipe_id to identify cli pipes instead of their message name * fix: come cleanups and add skip_cache parameter * fix: pipe/client-server communication robustness * fix: leaking messages between plugins while loading * feat: allow plugins to specify how a new plugin instance is launched when sending messages * fix: add permissions * refactor: adjust cli api * fix: improve cli plugin loading error messages * docs: cli pipe * fix: take plugin configuration into account when messaging between plugins * refactor: pipe message protobuf interface * refactor: update(event) -> pipe * refactor - rename CliMessage to CliPipe * fix: add is_private to pipes and change some naming * refactor - cli client * refactor: various cleanups * style(fmt): rustfmt * fix(pipes): backpressure across multiple plugins * style: some cleanups * style(fmt): rustfmt * style: fix merge conflict mistake * style(wording): clarify pipe permission * docs(changelog): introduce pipes * fix: add some robustness and future proofing * fix e2e tests --------- Co-authored-by: Aram Drevekenin <[email protected]> Co-authored-by: har7an <[email protected]>

… reducing size of TerminalCharacter (zellij-org#3043) * refactor: Simplify transfer_rows_from_viewport_to_lines_above next_lines is always consolidated to a single Row, which immediately gets removed - we can remove some dead code as a result * perf: Batch remove rows from the viewport for performance Given a 1MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s * perf: Optimize Row::drain_until by splitting chars in one step Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s * refactor: Simplify `if let` into a `.map` * refactor: There are only new saved coordinates when there were old ones * refactor: Unify viewport transfer: use common variable names * fix: Use same saved cursor logic in height resize as width See zellij-org#2182 for original introduction that only added it in one branch, this fixes an issue where the saved cursor was incorrectly reset when the real cursor was * fix: Correct saved+real cursor calculations when reflowing long lines * fix: Don't create canonical lines if cursor ends on EOL after resize Previously if a 20 character line were split into two 10 character lines, the cursor would be placed on the line after the two lines. New characters would then be treated as a new canonical line. This commit fixes this by biasing cursors to the end of the previous line. * fix: for cursor index calculation in lines that are already wrapped * chore: test for real/saved cursor position being handled separately * chore: Apply cargo format * refactor: Unify viewport transfer: transfer + cursor update together * perf: Reduce size of TerminalCharacter from 72 to 60 bytes With a 10MB single line catted into a fresh terminal, VmRSS goes from 964092 kB to 874020 kB (as reported by /proc/<pid>/status) before/after this patch Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~15s to ~12.5s * fix(build): Don't unconditionally rebuild zellij-utils * refactor: Remove Copy impl on TerminalCharacter * perf: Rc styles to reduce TerminalCharacter from 60 to 24 bytes With a 10MB single line catted into a fresh terminal, VmRSS goes from 845156 kB to 478396 kB (as reported by /proc/<pid>/status) before/after this patch Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~12.5s to ~7s * perf: Remove RcCharacterStyles::Default, allow enum niche optimisation This reduces TerminalCharacter from 24 to 16 bytes With a 10MB single line catted into a fresh terminal, VmRSS goes from 478396 kB to 398108 kB (as reported by /proc/<pid>/status) before/after this patch Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~7s to ~4.75s * docs: link anchor omission from reset_all is deliberate reset_all is only used from ansi params, and ansi params don't control link anchor * fix: Remove no-op on variable that gets immediately dropped * refactor: Simplify replace_character_at logic The original condition checked absolute_x_index was in bounds, then used the index to manipulate it. This is equivalent to getting a ref to the character at that position and manipulating directly * chore: Run xtask format * chore(repo): update issue templates * Bump rust version to 1.75.0 (zellij-org#3039) * rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR zellij-org#3039. * feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (zellij-org#3066) * prototype - working with message from the cli * prototype - pipe from the CLI to plugins * prototype - pipe from the CLI to plugins and back again * prototype - working with better cli interface * prototype - working after removing unused stuff * prototype - working with launching plugin if it is not launched, also fixed event ordering * refactor: change message to cli-message * prototype - allow plugins to send messages to each other * fix: allow cli messages to send plugin parameters (and implement backpressure) * fix: use input_pipe_id to identify cli pipes instead of their message name * fix: come cleanups and add skip_cache parameter * fix: pipe/client-server communication robustness * fix: leaking messages between plugins while loading * feat: allow plugins to specify how a new plugin instance is launched when sending messages * fix: add permissions * refactor: adjust cli api * fix: improve cli plugin loading error messages * docs: cli pipe * fix: take plugin configuration into account when messaging between plugins * refactor: pipe message protobuf interface * refactor: update(event) -> pipe * refactor - rename CliMessage to CliPipe * fix: add is_private to pipes and change some naming * refactor - cli client * refactor: various cleanups * style(fmt): rustfmt * fix(pipes): backpressure across multiple plugins * style: some cleanups * style(fmt): rustfmt * style: fix merge conflict mistake * style(wording): clarify pipe permission * docs(changelog): introduce pipes * xtask: Disable pusing during publish (zellij-org#3040) * xtask: Add `--no-push` flag to `publish` which can be used when simulating releases to work without a writable git fork of the zellij code. * xtask: Fix borrow issues * xtask/pipe: Require lockfile in publish to avoid errors from invalid dependency versions. * CHANGELOG: Add PR zellij-org#3040. * fix(terminal): some real/saved cursor bugs during resize (zellij-org#3032) * refactor: Simplify transfer_rows_from_viewport_to_lines_above next_lines is always consolidated to a single Row, which immediately gets removed - we can remove some dead code as a result * perf: Batch remove rows from the viewport for performance Given a 1MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s * perf: Optimize Row::drain_until by splitting chars in one step Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s * refactor: Simplify `if let` into a `.map` * refactor: There are only new saved coordinates when there were old ones * refactor: Unify viewport transfer: use common variable names * fix: Use same saved cursor logic in height resize as width See zellij-org#2182 for original introduction that only added it in one branch, this fixes an issue where the saved cursor was incorrectly reset when the real cursor was * fix: Correct saved+real cursor calculations when reflowing long lines * fix: Don't create canonical lines if cursor ends on EOL after resize Previously if a 20 character line were split into two 10 character lines, the cursor would be placed on the line after the two lines. New characters would then be treated as a new canonical line. This commit fixes this by biasing cursors to the end of the previous line. * fix: for cursor index calculation in lines that are already wrapped * chore: test for real/saved cursor position being handled separately * chore: Apply cargo format * chore(repo): update issue templates * Bump rust version to 1.75.0 (zellij-org#3039) * rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR zellij-org#3039. * feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (zellij-org#3066) * prototype - working with message from the cli * prototype - pipe from the CLI to plugins * prototype - pipe from the CLI to plugins and back again * prototype - working with better cli interface * prototype - working after removing unused stuff * prototype - working with launching plugin if it is not launched, also fixed event ordering * refactor: change message to cli-message * prototype - allow plugins to send messages to each other * fix: allow cli messages to send plugin parameters (and implement backpressure) * fix: use input_pipe_id to identify cli pipes instead of their message name * fix: come cleanups and add skip_cache parameter * fix: pipe/client-server communication robustness * fix: leaking messages between plugins while loading * feat: allow plugins to specify how a new plugin instance is launched when sending messages * fix: add permissions * refactor: adjust cli api * fix: improve cli plugin loading error messages * docs: cli pipe * fix: take plugin configuration into account when messaging between plugins * refactor: pipe message protobuf interface * refactor: update(event) -> pipe * refactor - rename CliMessage to CliPipe * fix: add is_private to pipes and change some naming * refactor - cli client * refactor: various cleanups * style(fmt): rustfmt * fix(pipes): backpressure across multiple plugins * style: some cleanups * style(fmt): rustfmt * style: fix merge conflict mistake * style(wording): clarify pipe permission * docs(changelog): introduce pipes * fix: add some robustness and future proofing * fix e2e tests --------- Co-authored-by: Aram Drevekenin <[email protected]> Co-authored-by: har7an <[email protected]> * fix integer overflow again (oops) --------- Co-authored-by: Aram Drevekenin <[email protected]> Co-authored-by: har7an <[email protected]>

Pkgsrc changes: * Adjust patches and cargo checksums to new versions. * For an external LLVM, set dependency of llvm >= 16, in accordance with the upstream changes. * Mark that on NetBSD we now need >= 9.0, so 8.x is no longer supported. * On NetBSD/sparc64 10.x, we now need GCC 12 to build the embedded LLVM, which is version 17; apparently GCC 10.4 or 10.5 mis-compiles it, resulting in an illegal instruction fault during the build. Ref. rust-lang/rust#117231 Upstream changes: Version 1.75.0 (2023-12-28) ========================== - [Stabilize `async fn` and return-position `impl Trait` in traits.] (rust-lang/rust#115822) - [Allow function pointer signatures containing `&mut T` in `const` contexts.] (rust-lang/rust#116015) - [Match `usize`/`isize` exhaustively with half-open ranges.] (rust-lang/rust#116692) - [Guarantee that `char` has the same size and alignment as `u32`.] (rust-lang/rust#116894) - [Document that the null pointer has the 0 address.] (rust-lang/rust#116988) - [Allow partially moved values in `match`.] (rust-lang/rust#103208) - [Add notes about non-compliant FP behavior on 32bit x86 targets.] (rust-lang/rust#113053) - [Stabilize ratified RISC-V target features.] (rust-lang/rust#116485) Compiler -------- - [Rework negative coherence to properly consider impls that only partly overlap.] (rust-lang/rust#112875) - [Bump `COINDUCTIVE_OVERLAP_IN_COHERENCE` to deny, and warn in dependencies.] (rust-lang/rust#116493) - [Consider alias bounds when computing liveness in NLL.] (rust-lang/rust#116733) - [Add the V (vector) extension to the `riscv64-linux-android` target spec.] (rust-lang/rust#116618) - [Automatically enable cross-crate inlining for small functions] (rust-lang/rust#116505) - Add several new tier 3 targets: - [`csky-unknown-linux-gnuabiv2hf`] (rust-lang/rust#117049) - [`i586-unknown-netbsd`] (rust-lang/rust#117170) - [`mipsel-unknown-netbsd`] (rust-lang/rust#117356) Refer to Rust's [platform support page][platform-support-doc] for more information on Rust's tiered platform support. Libraries --------- - [Override `Waker::clone_from` to avoid cloning `Waker`s unnecessarily.] (rust-lang/rust#96979) - [Implement `BufRead` for `VecDeque<u8>`.] (rust-lang/rust#110604) - [Implement `FusedIterator` for `DecodeUtf16` when the inner iterator does.] (rust-lang/rust#110729) - [Implement `Not, Bit{And,Or}{,Assign}` for IP addresses.] (rust-lang/rust#113747) - [Implement `Default` for `ExitCode`.] (rust-lang/rust#114589) - [Guarantee representation of None in NPO] (rust-lang/rust#115333) - [Document when atomic loads are guaranteed read-only.] (rust-lang/rust#115577) - [Broaden the consequences of recursive TLS initialization.] (rust-lang/rust#116172) - [Windows: Support sub-millisecond sleep.] (rust-lang/rust#116461) - [Fix generic bound of `str::SplitInclusive`'s `DoubleEndedIterator` impl] (rust-lang/rust#100806) - [Fix exit status / wait status on non-Unix `cfg(unix)` platforms.] (rust-lang/rust#115108) Stabilized APIs --------------- - [`Atomic*::from_ptr`] (https://doc.rust-lang.org/stable/core/sync/atomic/struct.AtomicUsize.html#method.from_ptr) - [`FileTimes`] (https://doc.rust-lang.org/stable/std/fs/struct.FileTimes.html) - [`FileTimesExt`] (https://doc.rust-lang.org/stable/std/os/windows/fs/trait.FileTimesExt.html) - [`File::set_modified`] (https://doc.rust-lang.org/stable/std/fs/struct.File.html#method.set_modified) - [`File::set_times`] (https://doc.rust-lang.org/stable/std/fs/struct.File.html#method.set_times) - [`IpAddr::to_canonical`] (https://doc.rust-lang.org/stable/core/net/enum.IpAddr.html#method.to_canonical) - [`Ipv6Addr::to_canonical`] (https://doc.rust-lang.org/stable/core/net/struct.Ipv6Addr.html#method.to_canonical) - [`Option::as_slice`] (https://doc.rust-lang.org/stable/core/option/enum.Option.html#method.as_slice) - [`Option::as_mut_slice`] (https://doc.rust-lang.org/stable/core/option/enum.Option.html#method.as_mut_slice) - [`pointer::byte_add`] (https://doc.rust-lang.org/stable/core/primitive.pointer.html#method.byte_add) - [`pointer::byte_offset`] (https://doc.rust-lang.org/stable/core/primitive.pointer.html#method.byte_offset) - [`pointer::byte_offset_from`] (https://doc.rust-lang.org/stable/core/primitive.pointer.html#method.byte_offset_from) - [`pointer::byte_sub`] (https://doc.rust-lang.org/stable/core/primitive.pointer.html#method.byte_sub) - [`pointer::wrapping_byte_add`] (https://doc.rust-lang.org/stable/core/primitive.pointer.html#method.wrapping_byte_add) - [`pointer::wrapping_byte_offset`] (https://doc.rust-lang.org/stable/core/primitive.pointer.html#method.wrapping_byte_offset) - [`pointer::wrapping_byte_sub`] (https://doc.rust-lang.org/stable/core/primitive.pointer.html#method.wrapping_byte_sub) These APIs are now stable in const contexts: - [`Ipv6Addr::to_ipv4_mapped`] (https://doc.rust-lang.org/stable/core/net/struct.Ipv6Addr.html#method.to_ipv4_mapped) - [`MaybeUninit::assume_init_read`] (https://doc.rust-lang.org/stable/core/mem/union.MaybeUninit.html#method.assume_init_read) - [`MaybeUninit::zeroed`] (https://doc.rust-lang.org/stable/core/mem/union.MaybeUninit.html#method.zeroed) - [`mem::discriminant`] (https://doc.rust-lang.org/stable/core/mem/fn.discriminant.html) - [`mem::zeroed`] (https://doc.rust-lang.org/stable/core/mem/fn.zeroed.html) Cargo ----- - [Add new packages to `[workspace.members]` automatically.] (rust-lang/cargo#12779) - [Allow version-less `Cargo.toml` manifests.] (rust-lang/cargo#12786) - [Make browser links out of HTML file paths.] (rust-lang/cargo#12889) Rustdoc ------- - [Accept less invalid Rust in rustdoc.] (rust-lang/rust#117450) - [Document lack of object safety on affected traits.] (rust-lang/rust#113241) - [Hide `#[repr(transparent)]` if it isn't part of the public ABI.] (rust-lang/rust#115439) - [Show enum discriminant if it is a C-like variant.] (rust-lang/rust#116142) Compatibility Notes ------------------- - [FreeBSD targets now require at least version 12.] (rust-lang/rust#114521) - [Formally demote tier 2 MIPS targets to tier 3.] (rust-lang/rust#115238) - [Make misalignment a hard error in `const` contexts.] (rust-lang/rust#115524) - [Fix detecting references to packed unsized fields.] (rust-lang/rust#115583) - [Remove support for compiler plugins.] (rust-lang/rust#116412)

rustbot assigned petrochenkov Oct 7, 2023

rustbot added S-waiting-on-review Status: Awaiting review from the assignee but also interested parties. T-compiler Relevant to the compiler team, which will review and decide on the PR/issue. labels Oct 7, 2023

This comment has been minimized.

Sign in to view

rustbot added the S-waiting-on-perf Status: Waiting on a perf run to be completed. label Oct 7, 2023

saethlin unassigned petrochenkov Oct 7, 2023

This comment has been minimized.

Sign in to view

rustbot added the perf-regression Performance regression. label Oct 7, 2023

saethlin force-pushed the infer-inline branch from 64f45aa to aac4020 Compare October 7, 2023 15:25

This comment has been minimized.

Sign in to view

rustbot added the S-waiting-on-perf Status: Waiting on a perf run to be completed. label Oct 7, 2023

This comment has been minimized.

Sign in to view

rustbot removed the S-waiting-on-perf Status: Waiting on a perf run to be completed. label Oct 8, 2023

pacak mentioned this pull request Dec 29, 2023

Trying to fix CI failure pacak/cargo-show-asm#231

Merged

This was referenced Jan 9, 2024

"Show LLVM IR" and "Show ASM" are missing some functions rust-lang/rust-playground#1032

Closed

Functions are missing from "--emit=llvm-ir" and "--emit=asm" #119850

Open

Patryk27 mentioned this pull request Feb 8, 2024

"Traitify" the Style struct DioxusLabs/taffy#568

Merged

9 tasks

jbr mentioned this pull request Feb 9, 2024

Enable memchr feature by default? trillium-rs/trillium#552

Closed

wprzytula mentioned this pull request Mar 6, 2024

Sprinkle #[inline] across scylla-cql crate to allow inlining into scylla crate scylladb/scylla-rust-driver#949

Open

pacak mentioned this pull request Mar 14, 2024

Function gets optimized away unless marked #[inline(never)] pub fn #122516

Closed

saethlin mentioned this pull request May 5, 2024

Rustc fails to inline trivial functions #37538

Closed

y21 mentioned this pull request May 16, 2024

Warn about missing #[inline] on trivial public methods rust-lang/rust-clippy#12797

Closed

ppershing mentioned this pull request Jun 11, 2024

Update #[inline] documentation nnethercote/perf-book#84

Closed

lilizoey mentioned this pull request Jun 17, 2024

Add snapped to integer vectors godot-rust/gdext#768

Merged

pacak mentioned this pull request Oct 8, 2024

example of public non generic library function not appearing pacak/cargo-show-asm#320

Closed

scottmcm mentioned this pull request Oct 25, 2024

#[inline(never)] does not work for async functions #129347

Open

FreezyLemon mentioned this pull request Nov 11, 2024

refactor: less #[inline(always)] rust-av/yuvxyb#26

Merged

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Automatically enable cross-crate inlining for small functions #116505

Automatically enable cross-crate inlining for small functions #116505

saethlin commented Oct 7, 2023 •

edited

Loading

rustbot commented Oct 7, 2023

saethlin commented Oct 7, 2023

This comment has been minimized.

bors commented Oct 7, 2023

This comment has been minimized.

bors commented Oct 7, 2023

This comment has been minimized.

rust-timer commented Oct 7, 2023

saethlin commented Oct 7, 2023

This comment has been minimized.

bors commented Oct 7, 2023

This comment has been minimized.

bors commented Oct 7, 2023

This comment has been minimized.

rust-timer commented Oct 8, 2023

briansmith commented Jan 12, 2024

saethlin commented Jan 12, 2024 •

edited

Loading

Automatically enable cross-crate inlining for small functions #116505

Automatically enable cross-crate inlining for small functions #116505

Conversation

saethlin commented Oct 7, 2023 • edited Loading

rustbot commented Oct 7, 2023

saethlin commented Oct 7, 2023

This comment has been minimized.

bors commented Oct 7, 2023

This comment has been minimized.

bors commented Oct 7, 2023

This comment has been minimized.

rust-timer commented Oct 7, 2023

Overall result: ❌✅ regressions and improvements - ACTION NEEDED

saethlin commented Oct 7, 2023

This comment has been minimized.

bors commented Oct 7, 2023

This comment has been minimized.

bors commented Oct 7, 2023

This comment has been minimized.

rust-timer commented Oct 8, 2023

Overall result: ❌✅ regressions and improvements - ACTION NEEDED

briansmith commented Jan 12, 2024

saethlin commented Jan 12, 2024 • edited Loading

saethlin commented Oct 7, 2023 •

edited

Loading

saethlin commented Jan 12, 2024 •

edited

Loading