I2C slave library for the Raspberry Pi Pico

I2C slave library for ESP32

Wishbone controlled I2C controllers

HID over I2C demonstration

I2Cwrapper is a firmware framework which helps you implement Arduino based I2C target (slave) devices for control of non-I2C hardware. Supports plain Arduinos, ESP8266, ESP32, SAMD, STM32, and ATtiny platforms.

Arduino Library for the TEA5767 Radio Module

I²C controleld PWM generator based on ATTiny85

An I/O expander for ESP8266 that provide 6 analog Inputs and 8 digital I/O through I2C bus based on a Arduino Nano

i2c slave example based on stm32f103

Python classes to use Raspberry Pi as master i2c on ESP32 using ESP32_i2c_slave library

I2C Bare metal drivers for stm32 f4 family of microcontrollers written in C from scratch .The driver contain apis for the user to send and receive data i2c communication . The driver has two flavor of apis polling based (blocking ) and Interrupt based (non blocking ) check examples in the Src folder for more reference .

I2C slave device using the HAL library of the STM32

The driver for I2C-slave on STM8S with RGBW Leds SK6812 (SK6812RGBW)

Bus and Device classes for i2c-bus, with promised functions.

This implements an i2c slave with a register map of 256 bytes in sram. The slave supports multi-byte writes and reads. It uses the "Wire" library.

I2C communication between two Arduino Uno

I²C interface based on ATTiny85 to control an TB6600 stepper motor driver

This repository provides examples that demonstrates how to develop PSoC 4 MCU based digital designs. These examples help you to use peripherals like TCPWM, SCBs ( UART, SPI, I2C), Encoders/Decoders and general digital components.

Custom i2c modules and ip cores