Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
* Changes 2023.05.18 (#649) * Added: Show specific TimeToSoC points in GUI Only if 0%, 10%, 20%, 80%, 90% and/or 100% are selected * Added: Show specific TimeToSoC points in GUI Only if 0%, 10%, 20%, 80%, 90% and/or 100% are selected * fix black lint error * fix black lint error * Improved JBD BMS soc calculation #439 * Fix for #397 #484 * small fixes * sort bms imports * Add support for HLPdata BMS4S #505 * Add support for Seplos BMS #530 * change flake8 settings * fix black lint errors * removed wildcard imports * fixed black lint errors * change flake8 settings * remove wildcard import and fix black lint errors * removed wildcard import * fixed black lint check * removed wildcard import, fixed black lint errors * config changes * removed wildcard import, fixed black lint errors * remove old log message in handle_changed_setting() * remove old log message in handle_changed_setting() * simplified condition for Time-To-Go/Soc * simplified condition for Time-To-Go/Soc * fix renogy import * fix renogy import * added BMS info and cleanup * MNB * Revov * Sinowealth * added BMS info and cleanup * MNB * Revov * Sinowealth * moved BMS to subfolder * moved BMS to subfolder * moved BMS to subfolder * corrected installble to run correct script * Added self.unique_identifier to the battery class Used to identify a BMS when multiple BMS are connected planned for future use * Added self.unique_identifier to the battery class Used to identify a BMS when multiple BMS are connected planned for future use * changed ble service name from `dbus-blebattery-$1` to `dbus-blebattery.$1` like the non ble service * fix small errors * read installed capacity at startup * disable ANT BMS by default #479 * fix cell voltage header parser * rework daly receive routine * improve read cell voltages - only work on sufficient data, drop only the bad package on checksum error, not the complete transmission * allow read_soc to also retry serial transmission * add daly cell balance state info. cells are red only if unbalanced now * bump version * typo * moved read_serialport_data() to daly.py * revert read_serialport_data() to the state before my changes * fix connection log startup message. now voltage/current/soc are displayed correctly * black reformatting * added linear voltage recalculation interval In the config file can now be defined how often CVL, CCL and DCL is recalculated * revert Daly adaption * replaced penalty voltage calculation with automatically calculated penalty voltages to simplify config max voltage is kept until batteries are balanced * flake config change * flake config change * added linear voltage recalculation interval In the config file can now be defined how often CVL, CCL and DCL is recalculated * replaced penalty voltage calculation with automatically calculated penalty voltages to simplify config max voltage is kept until batteries are balanced * fix black lint errors * updated changelog * disabled ANT BMS by default #479 * updated config.default.ini * fix typo * update nightly install script * Removed line * fixed error in HLPdataBMS4S * fixed wrong variable assignment `str` instead of `int` * fixed wrong variable assignment `str` instead of `int` * updated battery template * updated battery template * Fix for #450 #450 * Read charge/discharge limit JKBMS #4 * updated battery template * Progress with config limits reason * updated CELL_VOLTAGE_DIFF_TO_RESET_VOLTAGE_LIMIT default value * added SoC round for LLT/JBD * fixed log typo * updated nightly script * Fix for #450 #450 * Read charge/discharge limit JKBMS #4 * reworked installation procedure Bluetooth BMS is now also fetched from config.ini * updated release workflow * updated readme * Merge branch 'master' into jkbms_ble * deploy to github pages only on changes in master or docusaurus branch * cleanup * Merge branch 'master' of into jkbms_ble * GitHub pages config change * GitHub pages config change * cleanup * Renamed scripts for better reading #532 * update docusaurus dependencies * Renamed scripts for better reading #532 * update docusaurus dependencies * change sh with bash * limitation reason cleanup * limitation reason cleanup * changed default config settings FLOAT_CELL_VOLTAGE from 3.350V to 3.375V LINEAR_LIMITATION_ENABLE from False to True * changed default config settings FLOAT_CELL_VOLTAGE from 3.350V to 3.375V LINEAR_LIMITATION_ENABLE from False to True * removed testing line * Cleanup duplicated files Files were moved and not deleted * Cleanup * MOSFET temperature was displayed twice after merge * small typo fixes * updated changelog * updated changelog * Small fixes * fix disconnection behaviour: on disconnect, show '---' after 10s and 'not connected' after 60s * fix flake errors * small fix * fix disconnection behaviour & small fixes * on disconnect, show '---' after 10s and 'not connected' after 60s by @transistorgit * small fixes in shell script * added restart driver script * fixed file permission * Added: apply max voltage if CVCM_ENABLE is False before float voltage was applied * fixed type error * Added: BMS disconnect behaviour * Choose to block charge/discharge on disconnect * Trigger Venus OS alarm * Changed: Remove wildcard import from dbushelper.py * small fixes * Added: apply max voltage if CVCM_ENABLE is False before float voltage was applied * Added: BMS disconnect behaviour * Choose to block charge/discharge on disconnect * Trigger Venus OS alarm * Changed: Remove wildcard import from dbushelper.py * flake8 changes * copied lltjbd_ble from idstein:jdb_ble * Added and adapted LltJbd_Ble ATTENTION: Currently it's untested * small changes * read production date and append to hardware version * Set SOC nightly. Button is working, next is send command to bms * Added: Show additional data in device page * show self.unique_identifier as serial number * show self.production as device name * Added: JKBMS unique identifier & fixed data length * Added: JKBMS BLE unique identifier * Added: Jkbms_Ble connection_name() * Added: Daly unique identifier * Added: JKBMS BLE serial number, user defined field * Added: Show additional data in device page * show self.unique_identifier as serial number * show self.production as device name * Added: JKBMS unique identifier & fixed data length * move config.ini before update * read production date by @tranistorgit this adds the battery production date * read out daly battery code and use as unique id * moved production date and added custom field * clean battery code strip whitespace and replace one or multiple spaces with one underline if no battery code generate unique field * Daly read_capacity change Read capacity from config file, if no value provided by BMS * Daly try to fix no reply * Improvements by @transistorgit * changed value * set SOC (and date time) on button press. * fix battery code parser * format fix * format fix * fix extra long serial timeouts by calculating max time instead of loop counts * Changed: Merged all install files into one * updated install docs for nightly build * Small fixes * changed config backup * updated config file * updated changelog * debug daly * changed release workflow * changed release workflow * changed release workflow * changed release workflow * Updated from master * fix blank screen, debug daly * make Reset SoC a spin box * fix possible read_capacity problem * Daly read_balance_state() add missing return * Daly advanced troubleshooting * Changed: Improved Daily stability by a lot * fixes for disable and uninstall service was not removed and if removed, it was recreated by the serial starter * optimized USB install method * updated changelog * added missing qml to restore-gui.sh * optimized USB install method * Daly improvements * Set SoC on button press by @transistorgit * Improved driver stability by @transistorgit & @mr-manuel * moved production date and added custom field * changed jkbms_ble to dev * changed order * final daly 'broken packages handling' * Last changes for daly read problem by @transistorgit * change version in utils based on GitHub tag * test automatic release version change * Added: Configure voltage drop * test automatic release version change * fix Daly alarms * fixes small errors in bash files * fix missing driver name in restart-driver.sh * linear mode, allow max voltage on soc thesshold * Daly added one retry if failed * fixed LLT/JBD cell balancing display * rename tar after USB install fixes #638 * add force buttons * force buttons working * fixed removing entries * implement force charge/discharge * little bit cleaner soc preset * use existing serial read/write function * add stop balancong switch * use existing serial read/write function * Changed: Get bg colors from MbStyle for dark mode * prevent short circuit evaluation * fix merge errors * added changelog info * Fix #648 --------- Co-authored-by: Bernd Stahlbock <[email protected]> * Limit control voltage to max cell voltage * Rework serial parser (#12) much cleaner code, as it is optimised for the daly protocol * updated changelog * fix black lint error * fixed black lint error * added infos to battery template * JDB BLE support (#499) * Implementing JBD BLE support. It is built upon Bleak * Additionally, it provides some handling of for up to 4 temperature probes labels T1 (NTC2), T2 (NTC3), T3 (NTC4) and T4 (NTC5). NTC1 is the BMS module temperature itself * The device page has been extend to provide more details about the actual used hardware (= product name), firmware version and BLE address * updated changelog * Add Supoprt for HeltecSmartBMS (YYBMS) using modbus via RS485 connection (#658) * Changes 2023.05.24 (#667) * Check Venus OS version before installing * fix Jkbms_Ble error * updated changelog * updated readme and added donation link * bugfix: Heltec BMS test_connection breaks on other modbus compliant BMS systems * bugfix: LLTJBD BMS ignore non ASCII letters for hardware version * updated readme * Suppress daly read errors (#13) * updated descriptions * Changed logging level and give better feedback * Changed logging level to debug for unneeded messages * Give the user feedback, if a BMS is found or not. Useful, if only one BMS is tested. * small fixes --------- Co-authored-by: Bernd Stahlbock <[email protected]> Co-authored-by: Oleg Gurevich <[email protected]> Co-authored-by: Bernd <[email protected]> Co-authored-by: Paul Strawder <[email protected]> Co-authored-by: Raphael Mack <[email protected]> Co-authored-by: Strawder, Paul <[email protected]>
- Loading branch information
7 people
authored
May 31, 2023
1 parent
6a1e6b6
commit 0f84f03