BMS values are not shown correctly in log messages during startup #450
Assignees
Comments
|
@iLeeeZi could you check, if you have the same behaviour with the nightly build? |
Seems to be still the same |
|
Thanks, I will check it |
|
While working on the Heltec BMS I currently see the same and I guess the output is written to the log, before the data is read by the corresponding methods. |
|
Later today I release a fix. This comes from, that some BMS already read the data with |
mr-manuel
added a commit
to mr-manuel/venus-os_dbus-serialbattery
that referenced
this issue
May 2, 2023
Merged
mr-manuel
added a commit
that referenced
this issue
May 2, 2023
* Added: Read charge/discharge limits from JKBMS by @mr-manuel * Changed: Fix for #450 by @mr-manuel * Changed: Other small fixes and optimizations
|
This is fixed with the latest |
Works with JBD. SOC might need some rounding 😄 |
|
Ok, I added it. Will be in the next PR. |
mr-manuel
added a commit
to mr-manuel/venus-os_dbus-serialbattery
that referenced
this issue
May 2, 2023
|
@mr-manuel To Or To not lose improved resolution from #439 |
|
Sure |
|
Wouldn't it be best to round only on the output printing? |
|
There is no advantage in having more then one/two decimals in the SoC, since the SoC is already only an estimation and never exact in this case. The decimals are only for graph smoothing. |
Louisvdw
pushed a commit
that referenced
this issue
May 6, 2023
* added balancing switch status * added balancing switch status * changed default config file - added missing descriptions - changed name * indentation was wrong * adding fix for Venus OS >= v3.00~14 QML files * added cell balancing status for JKBMS * changed ConsumedAmpHours should be None instead of 0, if not available * TimeToSoc fixes - Added: Show TimeToSoc only, if enabled - Changed: description in config file - Changed: default value TIME_TO_SOC_VALUE_TYPE = 1 * resorted functions * fix CPU overload - changed: how often Time-To-Soc is calculated in seconds * fix Time-to-Go and Time-to-SoC - changed: Time-To-Go has to be always a positive int since it's used from dbus-systemcalc-py - changed: how Time-to-SoC is string is generated and displayed (format like Time-To-Go) * small fixes * Show MOSFET temperature from JKBMS Pull request from @baphomett #440 * bump version to 1.0.0 respecting semantic versioning * added uninstall script and fixed reinstall - `/data/conf/serial-starter.d` was not recreated if deleted * small fixes - added description in utils.py - change qml files in destination not source * typo * fixed cell balancing color for cells 13-24 * updated description in default config file * Updated logging to get relevant informations * clearer config file * make config file clearer * fix #421 - #421 * missing removals * corrected typo, added missing +x in release.yml * added info for new issue * fix black lint errors * optimize installation scripts * added script to install directly from repository * fixed serial-starter.d #520 * smaller fixes * fix #351 * fix System Switch in IO page * fix #239 by @TimGFoley * fix black lint errors * run code analyse only on code change * fix #311 * Separate Time-To-Go and Time-To-SoC activation * remove duplicated and incorrect log message on handle_changed_setting * properly log max battery currents on startup * optimize uninstall script * fix typo in log_settings * add charge mode display * Added: Temp name for sensor 1 & 2 Added the possibility to give a name to temperature sensor 1 & 2 This allows to see which sensor is low and high * Added: Choose how battery temperature is assembled * fix black lint errors * Added/Changed alarms for JKBMS * Added: HighInternalTemperature alarm for JKBMS * Changed: Temperature alarm to not trigger all in the same condition * Removed Alarms/HighCellVoltage It does not exist on the dbus * Changed: Moved charge mode from IO page to Paramaters page * Merge branch 'master' into master * Added: Show (dis)charge current limitation reason * Added changelog * corrected file permissions * Update readme * Small word case changes * fix dbus-daemon memory leak `poll_battery` is already called from the dbus mainloop in a separate thread. Opening a new thread here (and especially never closing it) will accumulate threads and leads to problems like `dbus-daemon` memory usage increasing over time, leading to eventual reboot by @seidler2547 * Added: Show specific TimeToSoC points in GUI Only if 0%, 10%, 20%, 80%, 90% and/or 100% are selected * fix black lint error * removed wildcard import, fixed black lint errors * removed wildcard import, fixed black lint errors * remove old log message in handle_changed_setting() * simplified condition for Time-To-Go/Soc * fix renogy import * added BMS info and cleanup * MNB * Revov * Sinowealth * moved BMS to subfolder * Added self.unique_identifier to the battery class Used to identify a BMS when multiple BMS are connected planned for future use * fix small errors * added linear voltage recalculation interval In the config file can now be defined how often CVL, CCL and DCL is recalculated * revert Daly adaption * replaced penalty voltage calculation with automatically calculated penalty voltages to simplify config max voltage is kept until batteries are balanced * flake config change * updated changelog * disabled ANT BMS by default #479 * fix typo * fixed wrong variable assignment `str` instead of `int` * updated battery template * updated nightly script * Fix for #450 #450 * Read charge/discharge limit JKBMS #4 * updated release workflow * updated readme * deploy to github pages only on changes in master or docusaurus branch * cleanup * GitHub pages config change * Renamed scripts for better reading #532 * update docusaurus dependencies * limitation reason cleanup * changed default config settings FLOAT_CELL_VOLTAGE from 3.350V to 3.375V LINEAR_LIMITATION_ENABLE from False to True * small typo fixes * updated changelog * fix disconnection behaviour & small fixes * on disconnect, show '---' after 10s and 'not connected' after 60s by @transistorgit * small fixes in shell script * added restart driver script * fixed file permission * Added: apply max voltage if CVCM_ENABLE is False before float voltage was applied * Added: BMS disconnect behaviour * Choose to block charge/discharge on disconnect * Trigger Venus OS alarm * Changed: Remove wildcard import from dbushelper.py * Added: Show additional data in device page * show self.unique_identifier as serial number * show self.production as device name * Added: JKBMS unique identifier & fixed data length * move config.ini before update * read production date by @tranistorgit this adds the battery production date --------- Co-authored-by: Daniel Hillenbrand <[email protected]>
Louisvdw
pushed a commit
that referenced
this issue
May 8, 2023
* added balancing switch status * added balancing switch status * changed default config file - added missing descriptions - changed name * indentation was wrong * adding fix for Venus OS >= v3.00~14 QML files * added cell balancing status for JKBMS * changed ConsumedAmpHours should be None instead of 0, if not available * TimeToSoc fixes - Added: Show TimeToSoc only, if enabled - Changed: description in config file - Changed: default value TIME_TO_SOC_VALUE_TYPE = 1 * resorted functions * fix CPU overload - changed: how often Time-To-Soc is calculated in seconds * fix Time-to-Go and Time-to-SoC - changed: Time-To-Go has to be always a positive int since it's used from dbus-systemcalc-py - changed: how Time-to-SoC is string is generated and displayed (format like Time-To-Go) * small fixes * Show MOSFET temperature from JKBMS Pull request from @baphomett #440 * bump version to 1.0.0 respecting semantic versioning * added uninstall script and fixed reinstall - `/data/conf/serial-starter.d` was not recreated if deleted * small fixes - added description in utils.py - change qml files in destination not source * typo * fixed cell balancing color for cells 13-24 * updated description in default config file * Updated logging to get relevant informations * clearer config file * make config file clearer * fix #421 - #421 * missing removals * corrected typo, added missing +x in release.yml * added info for new issue * fix black lint errors * optimize installation scripts * added script to install directly from repository * fixed serial-starter.d #520 * smaller fixes * fix #351 * fix System Switch in IO page * fix #239 by @TimGFoley * fix black lint errors * run code analyse only on code change * fix #311 * Separate Time-To-Go and Time-To-SoC activation * remove duplicated and incorrect log message on handle_changed_setting * properly log max battery currents on startup * optimize uninstall script * fix typo in log_settings * add charge mode display * Added: Temp name for sensor 1 & 2 Added the possibility to give a name to temperature sensor 1 & 2 This allows to see which sensor is low and high * Added: Choose how battery temperature is assembled * fix black lint errors * Added/Changed alarms for JKBMS * Added: HighInternalTemperature alarm for JKBMS * Changed: Temperature alarm to not trigger all in the same condition * Removed Alarms/HighCellVoltage It does not exist on the dbus * Changed: Moved charge mode from IO page to Paramaters page * Merge branch 'master' into master * Added: Show (dis)charge current limitation reason * Added changelog * corrected file permissions * Update readme * Small word case changes * fix dbus-daemon memory leak `poll_battery` is already called from the dbus mainloop in a separate thread. Opening a new thread here (and especially never closing it) will accumulate threads and leads to problems like `dbus-daemon` memory usage increasing over time, leading to eventual reboot by @seidler2547 * Added: Show specific TimeToSoC points in GUI Only if 0%, 10%, 20%, 80%, 90% and/or 100% are selected * fix black lint error * removed wildcard import, fixed black lint errors * removed wildcard import, fixed black lint errors * remove old log message in handle_changed_setting() * simplified condition for Time-To-Go/Soc * fix renogy import * added BMS info and cleanup * MNB * Revov * Sinowealth * moved BMS to subfolder * Added self.unique_identifier to the battery class Used to identify a BMS when multiple BMS are connected planned for future use * fix small errors * added linear voltage recalculation interval In the config file can now be defined how often CVL, CCL and DCL is recalculated * revert Daly adaption * replaced penalty voltage calculation with automatically calculated penalty voltages to simplify config max voltage is kept until batteries are balanced * flake config change * updated changelog * disabled ANT BMS by default #479 * fix typo * fixed wrong variable assignment `str` instead of `int` * updated battery template * updated nightly script * Fix for #450 #450 * Read charge/discharge limit JKBMS #4 * updated release workflow * updated readme * deploy to github pages only on changes in master or docusaurus branch * cleanup * GitHub pages config change * Renamed scripts for better reading #532 * update docusaurus dependencies * limitation reason cleanup * changed default config settings FLOAT_CELL_VOLTAGE from 3.350V to 3.375V LINEAR_LIMITATION_ENABLE from False to True * small typo fixes * updated changelog * fix disconnection behaviour & small fixes * on disconnect, show '---' after 10s and 'not connected' after 60s by @transistorgit * small fixes in shell script * added restart driver script * fixed file permission * Added: apply max voltage if CVCM_ENABLE is False before float voltage was applied * Added: BMS disconnect behaviour * Choose to block charge/discharge on disconnect * Trigger Venus OS alarm * Changed: Remove wildcard import from dbushelper.py * Added: Show additional data in device page * show self.unique_identifier as serial number * show self.production as device name * Added: JKBMS unique identifier & fixed data length * move config.ini before update * read production date by @tranistorgit this adds the battery production date * Changed: Merged all install files into one * updated install docs for nightly build * changed config backup * changed release workflow * changed release workflow * changed release workflow * optimized USB install method * Daly improvements * Set SoC on button press by @transistorgit * Improved driver stability by @transistorgit & @mr-manuel * moved production date and added custom field --------- Co-authored-by: Daniel Hillenbrand <[email protected]>
Louisvdw
pushed a commit
that referenced
this issue
May 8, 2023
* changed cell imbalance thresholds * added battery details - added: MOS temperature - added: Balancing switch status * JKBMS Bluetooth - added battery details (#454) * added battery details - added: capacity - added: MOS temperature - added: charging switch status - added: discharging switch status - added: balancing switch status - added: show if balancing is active and which cells are balanced - added: cell imbalance alert * changed cell imbalance thresholds * added battery details - added: MOS temperature - added: Balancing switch status * added support for the newer 32s systems, that have slightly different frame-structure * added stop of scraping if detection of jkbms fails * lint * indentation was wrong * adding fix for Venus OS >= v3.00~14 QML files * merge with baranator:dbus-serialbattery:master * BLE JK BMS model recognition Pull request from @tcrichton #462 * Small fixes - Added: Setup cronjob when installing driver - Added: Information how to pair JKBMS changed default pin - Changed: Bump version to v0.15.0-ble * Added driver restart script * added informations to run the driver * pasted code in wrong function * fixed cell balancing color * BLE JK BMS model recognition (#462) * * Other JK BMS’ have an underscore in their vendor_id * Don’t forget to include your new PageLynxIonIo in the build lis * build list is removed upstream --------- Co-authored-by: Tristan Crichton <[email protected]> * install BLE battery as local independent service * add disconnect before starting the service * unique id per BLE device * enable logging and improve error messages * Update jkbms_ble from master * fixes * moved ble part to installble.sh * added script to install directly from repository * added QML * create empty config.ini for easier user usage * optimize installation scripts * changed bash output * added post install notes * corrected errors * fix black lint errors * fix black lint errors * fix black lint errors * bump version * fixed serial-starter.d #520 * fix errors, move install notes to show always * Update install-nightly.sh * Update install-nightly.sh * make use of bluetooth configurable * remove modules with uninstall script * fix typo * Added install notes * fix #351 * fix System Switch in IO page * fix #239 by @TimGFoley * fix black lint errors * run code analyse only on code change * fix #311 * Separate Time-To-Go and Time-To-SoC activation * fix UnicodeDecodeError #485 (comment) * fix UnicodeDecodeError #485 (comment) * optimize uninstall script * fix typo in log_settings * add charge mode display * Added: Temp name for sensor 1 & 2 Added the possibility to give a name to temperature sensor 1 & 2 This allows to see which sensor is low and high * Added: Choose how battery temperature is assembled * Added/Changed alarms for JKBMS * Added: HighInternalTemperature alarm for JKBMS * Changed: Temperature alarm to not trigger all in the same condition * Removed Alarms/HighCellVoltage It does not exist on the dbus * Changed: Moved charge mode from IO page to Paramaters page * Added: Show (dis)charge current limitation reason * added changelog * corrected file permissions * fix dbus-daemon memory leak `poll_battery` is already called from the dbus mainloop in a separate thread. Opening a new thread here (and especially never closing it) will accumulate threads and leads to problems like `dbus-daemon` memory usage increasing over time, leading to eventual reboot * fix typo * Update readme * Remove bluetooth option from the config file Bluetooth classes are now imported automatically, if it's a Bluetooth port * Small word case changes * Added: Show specific TimeToSoC points in GUI Only if 0%, 10%, 20%, 80%, 90% and/or 100% are selected * fix black lint error * Improved JBD BMS soc calculation #439 * Fix for #397 #484 * small fixes * sort bms imports * Add support for HLPdata BMS4S #505 * Add support for Seplos BMS #530 * change flake8 settings * fix black lint errors * removed wildcard imports * fixed black lint errors * change flake8 settings * remove wildcard import and fix black lint errors * removed wildcard import * fixed black lint check * config changes * remove old log message in handle_changed_setting() * simplified condition for Time-To-Go/Soc * fix renogy import * added BMS info and cleanup * MNB * Revov * Sinowealth * moved BMS to subfolder * moved BMS to subfolder * corrected installble to run correct script * Added self.unique_identifier to the battery class Used to identify a BMS when multiple BMS are connected planned for future use * changed ble service name from `dbus-blebattery-$1` to `dbus-blebattery.$1` like the non ble service * read installed capacity at startup * disable ANT BMS by default #479 * fix cell voltage header parser * rework daly receive routine * improve read cell voltages - only work on sufficient data, drop only the bad package on checksum error, not the complete transmission * allow read_soc to also retry serial transmission * add daly cell balance state info. cells are red only if unbalanced now * bump version * typo * moved read_serialport_data() to daly.py * revert read_serialport_data() to the state before my changes * fix connection log startup message. now voltage/current/soc are displayed correctly * black reformatting * flake config change * added linear voltage recalculation interval In the config file can now be defined how often CVL, CCL and DCL is recalculated * replaced penalty voltage calculation with automatically calculated penalty voltages to simplify config max voltage is kept until batteries are balanced * fix black lint errors * updated config.default.ini * update nightly install script * Removed line * fixed error in HLPdataBMS4S * fixed wrong variable assignment `str` instead of `int` * updated battery template * Fix for #450 #450 * Read charge/discharge limit JKBMS #4 * updated battery template * Progress with config limits reason * updated CELL_VOLTAGE_DIFF_TO_RESET_VOLTAGE_LIMIT default value * added SoC round for LLT/JBD * fixed log typo * reworked installation procedure Bluetooth BMS is now also fetched from config.ini * Merge branch 'master' into jkbms_ble * Merge branch 'master' of into jkbms_ble * GitHub pages config change * cleanup * Renamed scripts for better reading #532 * update docusaurus dependencies * change sh with bash * limitation reason cleanup * changed default config settings FLOAT_CELL_VOLTAGE from 3.350V to 3.375V LINEAR_LIMITATION_ENABLE from False to True * removed testing line * Cleanup duplicated files Files were moved and not deleted * Cleanup * MOSFET temperature was displayed twice after merge * updated changelog * Small fixes * fix disconnection behaviour: on disconnect, show '---' after 10s and 'not connected' after 60s * fix flake errors * small fix * Added: apply max voltage if CVCM_ENABLE is False before float voltage was applied * fixed type error * Added: BMS disconnect behaviour * Choose to block charge/discharge on disconnect * Trigger Venus OS alarm * Changed: Remove wildcard import from dbushelper.py * small fixes * flake8 changes * copied lltjbd_ble from idstein:jdb_ble * Added and adapted LltJbd_Ble ATTENTION: Currently it's untested * small changes * read production date and append to hardware version * Set SOC nightly. Button is working, next is send command to bms * Added: Show additional data in device page * show self.unique_identifier as serial number * show self.production as device name * Added: JKBMS unique identifier & fixed data length * Added: JKBMS BLE unique identifier * Added: Jkbms_Ble connection_name() * Added: Daly unique identifier * Added: JKBMS BLE serial number, user defined field * read out daly battery code and use as unique id * moved production date and added custom field * clean battery code strip whitespace and replace one or multiple spaces with one underline if no battery code generate unique field * Daly read_capacity change Read capacity from config file, if no value provided by BMS * Daly try to fix no reply * Improvements by @transistorgit * changed value * set SOC (and date time) on button press. * fix battery code parser * format fix * format fix * fix extra long serial timeouts by calculating max time instead of loop counts * Small fixes * updated config file * updated changelog * debug daly * changed release workflow * Updated from master * fix blank screen, debug daly * make Reset SoC a spin box * fix possible read_capacity problem * Daly read_balance_state() add missing return * Daly advanced troubleshooting * Changed: Improved Daily stability by a lot * fixes for disable and uninstall service was not removed and if removed, it was recreated by the serial starter * optimized USB install method * updated changelog * added missing qml to restore-gui.sh * Improved uninstall * make executable * ready to merge with master --------- Co-authored-by: Eike Baran <[email protected]> Co-authored-by: Eike Baran <[email protected]> Co-authored-by: Tristan Crichton <[email protected]> Co-authored-by: Tristan Crichton <[email protected]> Co-authored-by: Stefan Seidel <[email protected]> Co-authored-by: seidler2547 <[email protected]> Co-authored-by: Bernd Stahlbock <[email protected]> Co-authored-by: Bernd <[email protected]>
mr-manuel
added a commit
that referenced
this issue
May 18, 2023
* Added: Show specific TimeToSoC points in GUI Only if 0%, 10%, 20%, 80%, 90% and/or 100% are selected * Added: Show specific TimeToSoC points in GUI Only if 0%, 10%, 20%, 80%, 90% and/or 100% are selected * fix black lint error * fix black lint error * Improved JBD BMS soc calculation #439 * Fix for #397 #484 * small fixes * sort bms imports * Add support for HLPdata BMS4S #505 * Add support for Seplos BMS #530 * change flake8 settings * fix black lint errors * removed wildcard imports * fixed black lint errors * change flake8 settings * remove wildcard import and fix black lint errors * removed wildcard import * fixed black lint check * removed wildcard import, fixed black lint errors * config changes * removed wildcard import, fixed black lint errors * remove old log message in handle_changed_setting() * remove old log message in handle_changed_setting() * simplified condition for Time-To-Go/Soc * simplified condition for Time-To-Go/Soc * fix renogy import * fix renogy import * added BMS info and cleanup * MNB * Revov * Sinowealth * added BMS info and cleanup * MNB * Revov * Sinowealth * moved BMS to subfolder * moved BMS to subfolder * moved BMS to subfolder * corrected installble to run correct script * Added self.unique_identifier to the battery class Used to identify a BMS when multiple BMS are connected planned for future use * Added self.unique_identifier to the battery class Used to identify a BMS when multiple BMS are connected planned for future use * changed ble service name from `dbus-blebattery-$1` to `dbus-blebattery.$1` like the non ble service * fix small errors * read installed capacity at startup * disable ANT BMS by default #479 * fix cell voltage header parser * rework daly receive routine * improve read cell voltages - only work on sufficient data, drop only the bad package on checksum error, not the complete transmission * allow read_soc to also retry serial transmission * add daly cell balance state info. cells are red only if unbalanced now * bump version * typo * moved read_serialport_data() to daly.py * revert read_serialport_data() to the state before my changes * fix connection log startup message. now voltage/current/soc are displayed correctly * black reformatting * added linear voltage recalculation interval In the config file can now be defined how often CVL, CCL and DCL is recalculated * revert Daly adaption * replaced penalty voltage calculation with automatically calculated penalty voltages to simplify config max voltage is kept until batteries are balanced * flake config change * flake config change * added linear voltage recalculation interval In the config file can now be defined how often CVL, CCL and DCL is recalculated * replaced penalty voltage calculation with automatically calculated penalty voltages to simplify config max voltage is kept until batteries are balanced * fix black lint errors * updated changelog * disabled ANT BMS by default #479 * updated config.default.ini * fix typo * update nightly install script * Removed line * fixed error in HLPdataBMS4S * fixed wrong variable assignment `str` instead of `int` * fixed wrong variable assignment `str` instead of `int` * updated battery template * updated battery template * Fix for #450 #450 * Read charge/discharge limit JKBMS #4 * updated battery template * Progress with config limits reason * updated CELL_VOLTAGE_DIFF_TO_RESET_VOLTAGE_LIMIT default value * added SoC round for LLT/JBD * fixed log typo * updated nightly script * Fix for #450 #450 * Read charge/discharge limit JKBMS #4 * reworked installation procedure Bluetooth BMS is now also fetched from config.ini * updated release workflow * updated readme * Merge branch 'master' into jkbms_ble * deploy to github pages only on changes in master or docusaurus branch * cleanup * Merge branch 'master' of into jkbms_ble * GitHub pages config change * GitHub pages config change * cleanup * Renamed scripts for better reading #532 * update docusaurus dependencies * Renamed scripts for better reading #532 * update docusaurus dependencies * change sh with bash * limitation reason cleanup * limitation reason cleanup * changed default config settings FLOAT_CELL_VOLTAGE from 3.350V to 3.375V LINEAR_LIMITATION_ENABLE from False to True * changed default config settings FLOAT_CELL_VOLTAGE from 3.350V to 3.375V LINEAR_LIMITATION_ENABLE from False to True * removed testing line * Cleanup duplicated files Files were moved and not deleted * Cleanup * MOSFET temperature was displayed twice after merge * small typo fixes * updated changelog * updated changelog * Small fixes * fix disconnection behaviour: on disconnect, show '---' after 10s and 'not connected' after 60s * fix flake errors * small fix * fix disconnection behaviour & small fixes * on disconnect, show '---' after 10s and 'not connected' after 60s by @transistorgit * small fixes in shell script * added restart driver script * fixed file permission * Added: apply max voltage if CVCM_ENABLE is False before float voltage was applied * fixed type error * Added: BMS disconnect behaviour * Choose to block charge/discharge on disconnect * Trigger Venus OS alarm * Changed: Remove wildcard import from dbushelper.py * small fixes * Added: apply max voltage if CVCM_ENABLE is False before float voltage was applied * Added: BMS disconnect behaviour * Choose to block charge/discharge on disconnect * Trigger Venus OS alarm * Changed: Remove wildcard import from dbushelper.py * flake8 changes * copied lltjbd_ble from idstein:jdb_ble * Added and adapted LltJbd_Ble ATTENTION: Currently it's untested * small changes * read production date and append to hardware version * Set SOC nightly. Button is working, next is send command to bms * Added: Show additional data in device page * show self.unique_identifier as serial number * show self.production as device name * Added: JKBMS unique identifier & fixed data length * Added: JKBMS BLE unique identifier * Added: Jkbms_Ble connection_name() * Added: Daly unique identifier * Added: JKBMS BLE serial number, user defined field * Added: Show additional data in device page * show self.unique_identifier as serial number * show self.production as device name * Added: JKBMS unique identifier & fixed data length * move config.ini before update * read production date by @tranistorgit this adds the battery production date * read out daly battery code and use as unique id * moved production date and added custom field * clean battery code strip whitespace and replace one or multiple spaces with one underline if no battery code generate unique field * Daly read_capacity change Read capacity from config file, if no value provided by BMS * Daly try to fix no reply * Improvements by @transistorgit * changed value * set SOC (and date time) on button press. * fix battery code parser * format fix * format fix * fix extra long serial timeouts by calculating max time instead of loop counts * Changed: Merged all install files into one * updated install docs for nightly build * Small fixes * changed config backup * updated config file * updated changelog * debug daly * changed release workflow * changed release workflow * changed release workflow * changed release workflow * Updated from master * fix blank screen, debug daly * make Reset SoC a spin box * fix possible read_capacity problem * Daly read_balance_state() add missing return * Daly advanced troubleshooting * Changed: Improved Daily stability by a lot * fixes for disable and uninstall service was not removed and if removed, it was recreated by the serial starter * optimized USB install method * updated changelog * added missing qml to restore-gui.sh * optimized USB install method * Daly improvements * Set SoC on button press by @transistorgit * Improved driver stability by @transistorgit & @mr-manuel * moved production date and added custom field * changed jkbms_ble to dev * changed order * final daly 'broken packages handling' * Last changes for daly read problem by @transistorgit * change version in utils based on GitHub tag * test automatic release version change * Added: Configure voltage drop * test automatic release version change * fix Daly alarms * fixes small errors in bash files * fix missing driver name in restart-driver.sh * linear mode, allow max voltage on soc thesshold * Daly added one retry if failed * fixed LLT/JBD cell balancing display * rename tar after USB install fixes #638 * add force buttons * force buttons working * fixed removing entries * implement force charge/discharge * little bit cleaner soc preset * use existing serial read/write function * add stop balancong switch * use existing serial read/write function * Changed: Get bg colors from MbStyle for dark mode * prevent short circuit evaluation * fix merge errors * added changelog info * Fix #648 --------- Co-authored-by: Bernd Stahlbock <[email protected]>
Louisvdw
pushed a commit
that referenced
this issue
May 31, 2023
* Changes 2023.05.18 (#649) * Added: Show specific TimeToSoC points in GUI Only if 0%, 10%, 20%, 80%, 90% and/or 100% are selected * Added: Show specific TimeToSoC points in GUI Only if 0%, 10%, 20%, 80%, 90% and/or 100% are selected * fix black lint error * fix black lint error * Improved JBD BMS soc calculation #439 * Fix for #397 #484 * small fixes * sort bms imports * Add support for HLPdata BMS4S #505 * Add support for Seplos BMS #530 * change flake8 settings * fix black lint errors * removed wildcard imports * fixed black lint errors * change flake8 settings * remove wildcard import and fix black lint errors * removed wildcard import * fixed black lint check * removed wildcard import, fixed black lint errors * config changes * removed wildcard import, fixed black lint errors * remove old log message in handle_changed_setting() * remove old log message in handle_changed_setting() * simplified condition for Time-To-Go/Soc * simplified condition for Time-To-Go/Soc * fix renogy import * fix renogy import * added BMS info and cleanup * MNB * Revov * Sinowealth * added BMS info and cleanup * MNB * Revov * Sinowealth * moved BMS to subfolder * moved BMS to subfolder * moved BMS to subfolder * corrected installble to run correct script * Added self.unique_identifier to the battery class Used to identify a BMS when multiple BMS are connected planned for future use * Added self.unique_identifier to the battery class Used to identify a BMS when multiple BMS are connected planned for future use * changed ble service name from `dbus-blebattery-$1` to `dbus-blebattery.$1` like the non ble service * fix small errors * read installed capacity at startup * disable ANT BMS by default #479 * fix cell voltage header parser * rework daly receive routine * improve read cell voltages - only work on sufficient data, drop only the bad package on checksum error, not the complete transmission * allow read_soc to also retry serial transmission * add daly cell balance state info. cells are red only if unbalanced now * bump version * typo * moved read_serialport_data() to daly.py * revert read_serialport_data() to the state before my changes * fix connection log startup message. now voltage/current/soc are displayed correctly * black reformatting * added linear voltage recalculation interval In the config file can now be defined how often CVL, CCL and DCL is recalculated * revert Daly adaption * replaced penalty voltage calculation with automatically calculated penalty voltages to simplify config max voltage is kept until batteries are balanced * flake config change * flake config change * added linear voltage recalculation interval In the config file can now be defined how often CVL, CCL and DCL is recalculated * replaced penalty voltage calculation with automatically calculated penalty voltages to simplify config max voltage is kept until batteries are balanced * fix black lint errors * updated changelog * disabled ANT BMS by default #479 * updated config.default.ini * fix typo * update nightly install script * Removed line * fixed error in HLPdataBMS4S * fixed wrong variable assignment `str` instead of `int` * fixed wrong variable assignment `str` instead of `int` * updated battery template * updated battery template * Fix for #450 #450 * Read charge/discharge limit JKBMS #4 * updated battery template * Progress with config limits reason * updated CELL_VOLTAGE_DIFF_TO_RESET_VOLTAGE_LIMIT default value * added SoC round for LLT/JBD * fixed log typo * updated nightly script * Fix for #450 #450 * Read charge/discharge limit JKBMS #4 * reworked installation procedure Bluetooth BMS is now also fetched from config.ini * updated release workflow * updated readme * Merge branch 'master' into jkbms_ble * deploy to github pages only on changes in master or docusaurus branch * cleanup * Merge branch 'master' of into jkbms_ble * GitHub pages config change * GitHub pages config change * cleanup * Renamed scripts for better reading #532 * update docusaurus dependencies * Renamed scripts for better reading #532 * update docusaurus dependencies * change sh with bash * limitation reason cleanup * limitation reason cleanup * changed default config settings FLOAT_CELL_VOLTAGE from 3.350V to 3.375V LINEAR_LIMITATION_ENABLE from False to True * changed default config settings FLOAT_CELL_VOLTAGE from 3.350V to 3.375V LINEAR_LIMITATION_ENABLE from False to True * removed testing line * Cleanup duplicated files Files were moved and not deleted * Cleanup * MOSFET temperature was displayed twice after merge * small typo fixes * updated changelog * updated changelog * Small fixes * fix disconnection behaviour: on disconnect, show '---' after 10s and 'not connected' after 60s * fix flake errors * small fix * fix disconnection behaviour & small fixes * on disconnect, show '---' after 10s and 'not connected' after 60s by @transistorgit * small fixes in shell script * added restart driver script * fixed file permission * Added: apply max voltage if CVCM_ENABLE is False before float voltage was applied * fixed type error * Added: BMS disconnect behaviour * Choose to block charge/discharge on disconnect * Trigger Venus OS alarm * Changed: Remove wildcard import from dbushelper.py * small fixes * Added: apply max voltage if CVCM_ENABLE is False before float voltage was applied * Added: BMS disconnect behaviour * Choose to block charge/discharge on disconnect * Trigger Venus OS alarm * Changed: Remove wildcard import from dbushelper.py * flake8 changes * copied lltjbd_ble from idstein:jdb_ble * Added and adapted LltJbd_Ble ATTENTION: Currently it's untested * small changes * read production date and append to hardware version * Set SOC nightly. Button is working, next is send command to bms * Added: Show additional data in device page * show self.unique_identifier as serial number * show self.production as device name * Added: JKBMS unique identifier & fixed data length * Added: JKBMS BLE unique identifier * Added: Jkbms_Ble connection_name() * Added: Daly unique identifier * Added: JKBMS BLE serial number, user defined field * Added: Show additional data in device page * show self.unique_identifier as serial number * show self.production as device name * Added: JKBMS unique identifier & fixed data length * move config.ini before update * read production date by @tranistorgit this adds the battery production date * read out daly battery code and use as unique id * moved production date and added custom field * clean battery code strip whitespace and replace one or multiple spaces with one underline if no battery code generate unique field * Daly read_capacity change Read capacity from config file, if no value provided by BMS * Daly try to fix no reply * Improvements by @transistorgit * changed value * set SOC (and date time) on button press. * fix battery code parser * format fix * format fix * fix extra long serial timeouts by calculating max time instead of loop counts * Changed: Merged all install files into one * updated install docs for nightly build * Small fixes * changed config backup * updated config file * updated changelog * debug daly * changed release workflow * changed release workflow * changed release workflow * changed release workflow * Updated from master * fix blank screen, debug daly * make Reset SoC a spin box * fix possible read_capacity problem * Daly read_balance_state() add missing return * Daly advanced troubleshooting * Changed: Improved Daily stability by a lot * fixes for disable and uninstall service was not removed and if removed, it was recreated by the serial starter * optimized USB install method * updated changelog * added missing qml to restore-gui.sh * optimized USB install method * Daly improvements * Set SoC on button press by @transistorgit * Improved driver stability by @transistorgit & @mr-manuel * moved production date and added custom field * changed jkbms_ble to dev * changed order * final daly 'broken packages handling' * Last changes for daly read problem by @transistorgit * change version in utils based on GitHub tag * test automatic release version change * Added: Configure voltage drop * test automatic release version change * fix Daly alarms * fixes small errors in bash files * fix missing driver name in restart-driver.sh * linear mode, allow max voltage on soc thesshold * Daly added one retry if failed * fixed LLT/JBD cell balancing display * rename tar after USB install fixes #638 * add force buttons * force buttons working * fixed removing entries * implement force charge/discharge * little bit cleaner soc preset * use existing serial read/write function * add stop balancong switch * use existing serial read/write function * Changed: Get bg colors from MbStyle for dark mode * prevent short circuit evaluation * fix merge errors * added changelog info * Fix #648 --------- Co-authored-by: Bernd Stahlbock <[email protected]> * Limit control voltage to max cell voltage * Rework serial parser (#12) much cleaner code, as it is optimised for the daly protocol * updated changelog * fix black lint error * fixed black lint error * added infos to battery template * JDB BLE support (#499) * Implementing JBD BLE support. It is built upon Bleak * Additionally, it provides some handling of for up to 4 temperature probes labels T1 (NTC2), T2 (NTC3), T3 (NTC4) and T4 (NTC5). NTC1 is the BMS module temperature itself * The device page has been extend to provide more details about the actual used hardware (= product name), firmware version and BLE address * updated changelog * Add Supoprt for HeltecSmartBMS (YYBMS) using modbus via RS485 connection (#658) * Changes 2023.05.24 (#667) * Check Venus OS version before installing * fix Jkbms_Ble error * updated changelog * updated readme and added donation link * bugfix: Heltec BMS test_connection breaks on other modbus compliant BMS systems * bugfix: LLTJBD BMS ignore non ASCII letters for hardware version * updated readme * Suppress daly read errors (#13) * updated descriptions * Changed logging level and give better feedback * Changed logging level to debug for unneeded messages * Give the user feedback, if a BMS is found or not. Useful, if only one BMS is tested. * small fixes --------- Co-authored-by: Bernd Stahlbock <[email protected]> Co-authored-by: Oleg Gurevich <[email protected]> Co-authored-by: Bernd <[email protected]> Co-authored-by: Paul Strawder <[email protected]> Co-authored-by: Raphael Mack <[email protected]> Co-authored-by: Strawder, Paul <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Describe the bug
During startup of serialbattery the values printed seems not to be correct. However, viewing cell voltage level via console seems to be right
To Reproduce
Use Jbd bms and connect via UART to raspberry
Expected behavior
right values to be shown - not sure if this is a general issue or only wrongly stated in log file
Screenshots
VenusOS (please complete the following information):
Battery/BMS (please complete the following information):
The text was updated successfully, but these errors were encountered: