utils.py overwritten after reboot #638
Labels
bug
Something isn't working
Comments
|
Have found the problem - if you have SD-Card inside the CERBO GX with the File venus-data.tar.gz - my first thing to install - but wiki tells you to install only over SSH on Cerbo GX. So i forgot the SD-Card inside Cerbo GX. For the MOD can you write this into WIKI to prevent other people run into this. |
mr-manuel
added a commit
to mr-manuel/venus-os_dbus-serialbattery
that referenced
this issue
May 12, 2023
|
Is USB-Install same as SD-CARD install - and is the wiki correct that i can install on CERBO GX only over SSH? Or is somthing old info? Thought if it can not install over SD-CARD then it is okay to ignore the file first... but not. And a SD-CARD is so little and hidden.. in the Cerbo-Slot - a USB-Stick is big and i see it the whole time :-) |
|
Why is my utils.py always reset to default values?
It seems that it works now. I will change that. |
Merged
mr-manuel
added a commit
that referenced
this issue
May 18, 2023
* Added: Show specific TimeToSoC points in GUI Only if 0%, 10%, 20%, 80%, 90% and/or 100% are selected * Added: Show specific TimeToSoC points in GUI Only if 0%, 10%, 20%, 80%, 90% and/or 100% are selected * fix black lint error * fix black lint error * Improved JBD BMS soc calculation #439 * Fix for #397 #484 * small fixes * sort bms imports * Add support for HLPdata BMS4S #505 * Add support for Seplos BMS #530 * change flake8 settings * fix black lint errors * removed wildcard imports * fixed black lint errors * change flake8 settings * remove wildcard import and fix black lint errors * removed wildcard import * fixed black lint check * removed wildcard import, fixed black lint errors * config changes * removed wildcard import, fixed black lint errors * remove old log message in handle_changed_setting() * remove old log message in handle_changed_setting() * simplified condition for Time-To-Go/Soc * simplified condition for Time-To-Go/Soc * fix renogy import * fix renogy import * added BMS info and cleanup * MNB * Revov * Sinowealth * added BMS info and cleanup * MNB * Revov * Sinowealth * moved BMS to subfolder * moved BMS to subfolder * moved BMS to subfolder * corrected installble to run correct script * Added self.unique_identifier to the battery class Used to identify a BMS when multiple BMS are connected planned for future use * Added self.unique_identifier to the battery class Used to identify a BMS when multiple BMS are connected planned for future use * changed ble service name from `dbus-blebattery-$1` to `dbus-blebattery.$1` like the non ble service * fix small errors * read installed capacity at startup * disable ANT BMS by default #479 * fix cell voltage header parser * rework daly receive routine * improve read cell voltages - only work on sufficient data, drop only the bad package on checksum error, not the complete transmission * allow read_soc to also retry serial transmission * add daly cell balance state info. cells are red only if unbalanced now * bump version * typo * moved read_serialport_data() to daly.py * revert read_serialport_data() to the state before my changes * fix connection log startup message. now voltage/current/soc are displayed correctly * black reformatting * added linear voltage recalculation interval In the config file can now be defined how often CVL, CCL and DCL is recalculated * revert Daly adaption * replaced penalty voltage calculation with automatically calculated penalty voltages to simplify config max voltage is kept until batteries are balanced * flake config change * flake config change * added linear voltage recalculation interval In the config file can now be defined how often CVL, CCL and DCL is recalculated * replaced penalty voltage calculation with automatically calculated penalty voltages to simplify config max voltage is kept until batteries are balanced * fix black lint errors * updated changelog * disabled ANT BMS by default #479 * updated config.default.ini * fix typo * update nightly install script * Removed line * fixed error in HLPdataBMS4S * fixed wrong variable assignment `str` instead of `int` * fixed wrong variable assignment `str` instead of `int` * updated battery template * updated battery template * Fix for #450 #450 * Read charge/discharge limit JKBMS #4 * updated battery template * Progress with config limits reason * updated CELL_VOLTAGE_DIFF_TO_RESET_VOLTAGE_LIMIT default value * added SoC round for LLT/JBD * fixed log typo * updated nightly script * Fix for #450 #450 * Read charge/discharge limit JKBMS #4 * reworked installation procedure Bluetooth BMS is now also fetched from config.ini * updated release workflow * updated readme * Merge branch 'master' into jkbms_ble * deploy to github pages only on changes in master or docusaurus branch * cleanup * Merge branch 'master' of into jkbms_ble * GitHub pages config change * GitHub pages config change * cleanup * Renamed scripts for better reading #532 * update docusaurus dependencies * Renamed scripts for better reading #532 * update docusaurus dependencies * change sh with bash * limitation reason cleanup * limitation reason cleanup * changed default config settings FLOAT_CELL_VOLTAGE from 3.350V to 3.375V LINEAR_LIMITATION_ENABLE from False to True * changed default config settings FLOAT_CELL_VOLTAGE from 3.350V to 3.375V LINEAR_LIMITATION_ENABLE from False to True * removed testing line * Cleanup duplicated files Files were moved and not deleted * Cleanup * MOSFET temperature was displayed twice after merge * small typo fixes * updated changelog * updated changelog * Small fixes * fix disconnection behaviour: on disconnect, show '---' after 10s and 'not connected' after 60s * fix flake errors * small fix * fix disconnection behaviour & small fixes * on disconnect, show '---' after 10s and 'not connected' after 60s by @transistorgit * small fixes in shell script * added restart driver script * fixed file permission * Added: apply max voltage if CVCM_ENABLE is False before float voltage was applied * fixed type error * Added: BMS disconnect behaviour * Choose to block charge/discharge on disconnect * Trigger Venus OS alarm * Changed: Remove wildcard import from dbushelper.py * small fixes * Added: apply max voltage if CVCM_ENABLE is False before float voltage was applied * Added: BMS disconnect behaviour * Choose to block charge/discharge on disconnect * Trigger Venus OS alarm * Changed: Remove wildcard import from dbushelper.py * flake8 changes * copied lltjbd_ble from idstein:jdb_ble * Added and adapted LltJbd_Ble ATTENTION: Currently it's untested * small changes * read production date and append to hardware version * Set SOC nightly. Button is working, next is send command to bms * Added: Show additional data in device page * show self.unique_identifier as serial number * show self.production as device name * Added: JKBMS unique identifier & fixed data length * Added: JKBMS BLE unique identifier * Added: Jkbms_Ble connection_name() * Added: Daly unique identifier * Added: JKBMS BLE serial number, user defined field * Added: Show additional data in device page * show self.unique_identifier as serial number * show self.production as device name * Added: JKBMS unique identifier & fixed data length * move config.ini before update * read production date by @tranistorgit this adds the battery production date * read out daly battery code and use as unique id * moved production date and added custom field * clean battery code strip whitespace and replace one or multiple spaces with one underline if no battery code generate unique field * Daly read_capacity change Read capacity from config file, if no value provided by BMS * Daly try to fix no reply * Improvements by @transistorgit * changed value * set SOC (and date time) on button press. * fix battery code parser * format fix * format fix * fix extra long serial timeouts by calculating max time instead of loop counts * Changed: Merged all install files into one * updated install docs for nightly build * Small fixes * changed config backup * updated config file * updated changelog * debug daly * changed release workflow * changed release workflow * changed release workflow * changed release workflow * Updated from master * fix blank screen, debug daly * make Reset SoC a spin box * fix possible read_capacity problem * Daly read_balance_state() add missing return * Daly advanced troubleshooting * Changed: Improved Daily stability by a lot * fixes for disable and uninstall service was not removed and if removed, it was recreated by the serial starter * optimized USB install method * updated changelog * added missing qml to restore-gui.sh * optimized USB install method * Daly improvements * Set SoC on button press by @transistorgit * Improved driver stability by @transistorgit & @mr-manuel * moved production date and added custom field * changed jkbms_ble to dev * changed order * final daly 'broken packages handling' * Last changes for daly read problem by @transistorgit * change version in utils based on GitHub tag * test automatic release version change * Added: Configure voltage drop * test automatic release version change * fix Daly alarms * fixes small errors in bash files * fix missing driver name in restart-driver.sh * linear mode, allow max voltage on soc thesshold * Daly added one retry if failed * fixed LLT/JBD cell balancing display * rename tar after USB install fixes #638 * add force buttons * force buttons working * fixed removing entries * implement force charge/discharge * little bit cleaner soc preset * use existing serial read/write function * add stop balancong switch * use existing serial read/write function * Changed: Get bg colors from MbStyle for dark mode * prevent short circuit evaluation * fix merge errors * added changelog info * Fix #648 --------- Co-authored-by: Bernd Stahlbock <[email protected]>
Louisvdw
pushed a commit
that referenced
this issue
May 31, 2023
* Changes 2023.05.18 (#649) * Added: Show specific TimeToSoC points in GUI Only if 0%, 10%, 20%, 80%, 90% and/or 100% are selected * Added: Show specific TimeToSoC points in GUI Only if 0%, 10%, 20%, 80%, 90% and/or 100% are selected * fix black lint error * fix black lint error * Improved JBD BMS soc calculation #439 * Fix for #397 #484 * small fixes * sort bms imports * Add support for HLPdata BMS4S #505 * Add support for Seplos BMS #530 * change flake8 settings * fix black lint errors * removed wildcard imports * fixed black lint errors * change flake8 settings * remove wildcard import and fix black lint errors * removed wildcard import * fixed black lint check * removed wildcard import, fixed black lint errors * config changes * removed wildcard import, fixed black lint errors * remove old log message in handle_changed_setting() * remove old log message in handle_changed_setting() * simplified condition for Time-To-Go/Soc * simplified condition for Time-To-Go/Soc * fix renogy import * fix renogy import * added BMS info and cleanup * MNB * Revov * Sinowealth * added BMS info and cleanup * MNB * Revov * Sinowealth * moved BMS to subfolder * moved BMS to subfolder * moved BMS to subfolder * corrected installble to run correct script * Added self.unique_identifier to the battery class Used to identify a BMS when multiple BMS are connected planned for future use * Added self.unique_identifier to the battery class Used to identify a BMS when multiple BMS are connected planned for future use * changed ble service name from `dbus-blebattery-$1` to `dbus-blebattery.$1` like the non ble service * fix small errors * read installed capacity at startup * disable ANT BMS by default #479 * fix cell voltage header parser * rework daly receive routine * improve read cell voltages - only work on sufficient data, drop only the bad package on checksum error, not the complete transmission * allow read_soc to also retry serial transmission * add daly cell balance state info. cells are red only if unbalanced now * bump version * typo * moved read_serialport_data() to daly.py * revert read_serialport_data() to the state before my changes * fix connection log startup message. now voltage/current/soc are displayed correctly * black reformatting * added linear voltage recalculation interval In the config file can now be defined how often CVL, CCL and DCL is recalculated * revert Daly adaption * replaced penalty voltage calculation with automatically calculated penalty voltages to simplify config max voltage is kept until batteries are balanced * flake config change * flake config change * added linear voltage recalculation interval In the config file can now be defined how often CVL, CCL and DCL is recalculated * replaced penalty voltage calculation with automatically calculated penalty voltages to simplify config max voltage is kept until batteries are balanced * fix black lint errors * updated changelog * disabled ANT BMS by default #479 * updated config.default.ini * fix typo * update nightly install script * Removed line * fixed error in HLPdataBMS4S * fixed wrong variable assignment `str` instead of `int` * fixed wrong variable assignment `str` instead of `int` * updated battery template * updated battery template * Fix for #450 #450 * Read charge/discharge limit JKBMS #4 * updated battery template * Progress with config limits reason * updated CELL_VOLTAGE_DIFF_TO_RESET_VOLTAGE_LIMIT default value * added SoC round for LLT/JBD * fixed log typo * updated nightly script * Fix for #450 #450 * Read charge/discharge limit JKBMS #4 * reworked installation procedure Bluetooth BMS is now also fetched from config.ini * updated release workflow * updated readme * Merge branch 'master' into jkbms_ble * deploy to github pages only on changes in master or docusaurus branch * cleanup * Merge branch 'master' of into jkbms_ble * GitHub pages config change * GitHub pages config change * cleanup * Renamed scripts for better reading #532 * update docusaurus dependencies * Renamed scripts for better reading #532 * update docusaurus dependencies * change sh with bash * limitation reason cleanup * limitation reason cleanup * changed default config settings FLOAT_CELL_VOLTAGE from 3.350V to 3.375V LINEAR_LIMITATION_ENABLE from False to True * changed default config settings FLOAT_CELL_VOLTAGE from 3.350V to 3.375V LINEAR_LIMITATION_ENABLE from False to True * removed testing line * Cleanup duplicated files Files were moved and not deleted * Cleanup * MOSFET temperature was displayed twice after merge * small typo fixes * updated changelog * updated changelog * Small fixes * fix disconnection behaviour: on disconnect, show '---' after 10s and 'not connected' after 60s * fix flake errors * small fix * fix disconnection behaviour & small fixes * on disconnect, show '---' after 10s and 'not connected' after 60s by @transistorgit * small fixes in shell script * added restart driver script * fixed file permission * Added: apply max voltage if CVCM_ENABLE is False before float voltage was applied * fixed type error * Added: BMS disconnect behaviour * Choose to block charge/discharge on disconnect * Trigger Venus OS alarm * Changed: Remove wildcard import from dbushelper.py * small fixes * Added: apply max voltage if CVCM_ENABLE is False before float voltage was applied * Added: BMS disconnect behaviour * Choose to block charge/discharge on disconnect * Trigger Venus OS alarm * Changed: Remove wildcard import from dbushelper.py * flake8 changes * copied lltjbd_ble from idstein:jdb_ble * Added and adapted LltJbd_Ble ATTENTION: Currently it's untested * small changes * read production date and append to hardware version * Set SOC nightly. Button is working, next is send command to bms * Added: Show additional data in device page * show self.unique_identifier as serial number * show self.production as device name * Added: JKBMS unique identifier & fixed data length * Added: JKBMS BLE unique identifier * Added: Jkbms_Ble connection_name() * Added: Daly unique identifier * Added: JKBMS BLE serial number, user defined field * Added: Show additional data in device page * show self.unique_identifier as serial number * show self.production as device name * Added: JKBMS unique identifier & fixed data length * move config.ini before update * read production date by @tranistorgit this adds the battery production date * read out daly battery code and use as unique id * moved production date and added custom field * clean battery code strip whitespace and replace one or multiple spaces with one underline if no battery code generate unique field * Daly read_capacity change Read capacity from config file, if no value provided by BMS * Daly try to fix no reply * Improvements by @transistorgit * changed value * set SOC (and date time) on button press. * fix battery code parser * format fix * format fix * fix extra long serial timeouts by calculating max time instead of loop counts * Changed: Merged all install files into one * updated install docs for nightly build * Small fixes * changed config backup * updated config file * updated changelog * debug daly * changed release workflow * changed release workflow * changed release workflow * changed release workflow * Updated from master * fix blank screen, debug daly * make Reset SoC a spin box * fix possible read_capacity problem * Daly read_balance_state() add missing return * Daly advanced troubleshooting * Changed: Improved Daily stability by a lot * fixes for disable and uninstall service was not removed and if removed, it was recreated by the serial starter * optimized USB install method * updated changelog * added missing qml to restore-gui.sh * optimized USB install method * Daly improvements * Set SoC on button press by @transistorgit * Improved driver stability by @transistorgit & @mr-manuel * moved production date and added custom field * changed jkbms_ble to dev * changed order * final daly 'broken packages handling' * Last changes for daly read problem by @transistorgit * change version in utils based on GitHub tag * test automatic release version change * Added: Configure voltage drop * test automatic release version change * fix Daly alarms * fixes small errors in bash files * fix missing driver name in restart-driver.sh * linear mode, allow max voltage on soc thesshold * Daly added one retry if failed * fixed LLT/JBD cell balancing display * rename tar after USB install fixes #638 * add force buttons * force buttons working * fixed removing entries * implement force charge/discharge * little bit cleaner soc preset * use existing serial read/write function * add stop balancong switch * use existing serial read/write function * Changed: Get bg colors from MbStyle for dark mode * prevent short circuit evaluation * fix merge errors * added changelog info * Fix #648 --------- Co-authored-by: Bernd Stahlbock <[email protected]> * Limit control voltage to max cell voltage * Rework serial parser (#12) much cleaner code, as it is optimised for the daly protocol * updated changelog * fix black lint error * fixed black lint error * added infos to battery template * JDB BLE support (#499) * Implementing JBD BLE support. It is built upon Bleak * Additionally, it provides some handling of for up to 4 temperature probes labels T1 (NTC2), T2 (NTC3), T3 (NTC4) and T4 (NTC5). NTC1 is the BMS module temperature itself * The device page has been extend to provide more details about the actual used hardware (= product name), firmware version and BLE address * updated changelog * Add Supoprt for HeltecSmartBMS (YYBMS) using modbus via RS485 connection (#658) * Changes 2023.05.24 (#667) * Check Venus OS version before installing * fix Jkbms_Ble error * updated changelog * updated readme and added donation link * bugfix: Heltec BMS test_connection breaks on other modbus compliant BMS systems * bugfix: LLTJBD BMS ignore non ASCII letters for hardware version * updated readme * Suppress daly read errors (#13) * updated descriptions * Changed logging level and give better feedback * Changed logging level to debug for unneeded messages * Give the user feedback, if a BMS is found or not. Useful, if only one BMS is tested. * small fixes --------- Co-authored-by: Bernd Stahlbock <[email protected]> Co-authored-by: Oleg Gurevich <[email protected]> Co-authored-by: Bernd <[email protected]> Co-authored-by: Paul Strawder <[email protected]> Co-authored-by: Raphael Mack <[email protected]> Co-authored-by: Strawder, Paul <[email protected]>
Louisvdw
pushed a commit
that referenced
this issue
May 31, 2023
* update faq * Improved install doc * Modified installation documentation * fix broken link * added faq * Update install info #638 * Updated docusaurus to the latest version * Added checklist for new BMS * fix typo in file reference * fixed links * Improved documentation * added donation notes for mr-manuel * fix error * added bluetooth info * updated introduction * added how the driver works * solve merge conflicts * revert changes --------- Co-authored-by: Raphael Mack <[email protected]>
Louisvdw
pushed a commit
that referenced
this issue
Nov 25, 2023
* update faq * Improved install doc * Modified installation documentation * fix broken link * added faq * Update install info #638 * Updated docusaurus to the latest version * Added checklist for new BMS * fix typo in file reference * fixed links * Improved documentation * added donation notes for mr-manuel * fix error * added bluetooth info * updated introduction * added how the driver works * solve merge conflicts * revert changes * fix typo * updated checklist for adding new BMS * added troubleshooting tips * added downgrade info * added tail info * updated how to enable disabled BMS * added troubleshooting serial starter info * added Daly standby informations * update packages solves #747 * added info * moved paragraph and updated * update packages, fix #779 * fixes 788 * Added FAQ and update packages * Add Daly high voltage alarm info * fix typo * updated docusaurus to v2.4.3 * Added install info * updated "supporting this project" section * Updated docusaurus to v3 * added info about config files * Merge master into docusaurus * Added info for Bluetooth and CAN --------- Co-authored-by: Raphael Mack <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Describe the bug
Hello,
have change the settings in the utils.py with nano - i use nano often on my linux-machines so i know how to handle it.
First time i change the settings in utils.py and then i wonder why it is on default again - so i have a look and see the values back to default. I have then change again - check double the file with nano - make something an check again - all fine. Then i make reboot - voila - utils.py is back to default. Then i have copied utils.py to utils.org - then change settings and rename - the same after reboot all settings back to default. I have read the wiki but it looks like a simple nano change file thing - but not?
How to reproduce
Steps to reproduce the behavior:
Expected behavior
Persistant changes
Driver version
0.14.3
Venus OS device type
Cerbo GX
Venus OS version
v2.92
BMS type
Daly Smart BMS
Cell count
8S
Connection type
Serial USB adapter to TTL
Config file
Relevant log output
Any other information that may be helpful
No response
The text was updated successfully, but these errors were encountered: