Skip to content

Latest commit

 

History

History
139 lines (134 loc) · 12.3 KB

CHANGELOG.md

File metadata and controls

139 lines (134 loc) · 12.3 KB

Changelog

v1.0.x

  • Added: Bluetooth: Show signal strength of BMS in log by @mr-manuel
  • Added: Create unique identifier, if not provided from BMS by @mr-manuel
  • Added: Current average of the last 5 minutes by @mr-manuel
  • Added: Daly BMS: Auto reset SoC when changing to float (can be turned off in the config file) by @transistorgit
  • Added: Exclude a device from beeing used by the dbus-serialbattery driver by @mr-manuel
  • Added: Implement callback function for update by @seidler2547
  • Added: JKBMS BLE - Show last five characters from the MAC address in the custom name (which is displayed in the device list) by @mr-manuel
  • Added: Load to bulk voltage every x days to reset the SoC to 100% for some BMS by @mr-manuel
  • Added: Save custom name and make it restart persistant by @mr-manuel
  • Added: Temperature names to dbus and mqtt by @mr-manuel
  • Added: Use current average of the last 300 cycles for time to go and time to SoC calculation by @mr-manuel
  • Added: Validate current, voltage, capacity and SoC for all BMS. This prevents that a device, which is no BMS, is detected as BMS. Fixes also #479 by @mr-manuel
  • Changed: Enable BMS that are disabled by default by specifying it in the config file. No more need to edit scripts by @mr-manuel
  • Changed: Fix daly readsentence by @transistorgit
  • Changed: Fix Sinowealth not loading #702 by @mr-manuel
  • Changed: Fixed error in reinstall-local.sh script for Bluetooth installation by @mr-manuel
  • Changed: Fixed meaningless Time to Go values by @transistorgit
  • Changed: Fixed typo in config.ini sample by @hoschult
  • Changed: For BMS_TYPE now multiple BMS can be specified by @mr-manuel
  • Changed: Improved battery error handling on connection loss by @mr-manuel
  • Changed: Improved battery voltage handling in linear absorption mode by @ogurevich
  • Changed: Improved driver reinstall when multiple Bluetooth BMS are enabled by @mr-manuel
  • Changed: Improved Jkbms_Ble driver by @seidler2547 & @mr-manuel
  • Changed: Make CCL and DCL limiting messages more clear by @mr-manuel
  • Changed: Reduce the big inrush current if the CVL jumps from Bulk/Absorbtion to Float #659 by @Rikkert-RS & @ogurevich
  • Changed: Time-to-Go and Time-to-SoC use the current average of the last 5 minutes for calculation by @mr-manuel
  • Changed: Time-to-SoC calculate only positive points by @mr-manuel
  • Removed: Cronjob to restart Bluetooth service every 12 hours by @mr-manuel

v1.0.20230531

ATTENTION: Breaking changes! The config is now done in the config.ini. All values from the utils.py gets lost. The changes in the config.ini will persists future updates.

  • Added: self.unique_identifier to the battery class. Used to identify a BMS when multiple BMS are connected - planned for future use by @mr-manuel
  • Added: Alert is triggered, when BMS communication is lost by @mr-manuel
  • Added: Apply max voltage, if CVCM_ENABLE is False. Before float voltage was applied by @mr-manuel
  • Added: Balancing status for JKBMS by @mr-manuel
  • Added: Balancing switch status for JKBMS by @mr-manuel
  • Added: Balancing switch status to the GUI -> SerialBattery -> IO by @mr-manuel
  • Added: Block charge/discharge when BMS communication is lost. Can be enabled trough the config file by @mr-manuel
  • Added: Charge Mode display by @mr-manuel
  • Added: Check minimum required Venus OS version before installing by @mr-manuel
  • Added: Choose how battery temperature is assembled (mean temp 1 & 2, only temp 1 or only temp 2) by @mr-manuel
  • Added: Config file by @ppuetsch
  • Added: Create empty config.ini for easier user usage by @mr-manuel
  • Added: Cronjob to restart Bluetooth service every 12 hours by @mr-manuel
  • Added: Daly BMS - Discharge / Charge Mosfet switching over remote console/GUI #26 by @transistorgit
  • Added: Daly BMS - Read capacity #594 by @transistorgit
  • Added: Daly BMS - Read production date and build unique identifier by @transistorgit
  • Added: Daly BMS - Set SoC by @transistorgit
  • Added: Daly BMS - Show "battery code" field that can be set in the Daly app by @transistorgit
  • Added: Device name field (found in the GUI -> SerialBattery -> Device), that show a custom string that can be set in some BMS, if available by @mr-manuel
  • Added: Driver uninstall script by @mr-manuel
  • Added: Fix for Venus OS >= v3.00~14 showing unused items #469 by @mr-manuel
  • Added: HeltecSmartBMS driver by @ramack
  • Added: HighInternalTemperature alarm (MOSFET) for JKBMS by @mr-manuel
  • Added: HLPdata BMS driver by @ peterohman
  • Added: Improved maintainability (flake8, black lint), introduced code checks and automate release build #386 by @ppuetsch
  • Added: Install needed Bluetooth components automatically after a Venus OS upgrade by @mr-manuel
  • Added: JKBMS - MOS temperature #440 by @baphomett
  • Added: JKBMS - Uniqie identifier and show "User Private Data" field that can be set in the JKBMS App to identify the BMS in a multi battery environment by @mr-manuel
  • Added: JKBMS BLE - Balancing switch status by @mr-manuel
  • Added: JKBMS BLE - Capacity by @mr-manuel
  • Added: JKBMS BLE - Cell imbalance alert by @mr-manuel
  • Added: JKBMS BLE - Charging switch status by @mr-manuel
  • Added: JKBMS BLE - Discharging switch status by @mr-manuel
  • Added: JKBMS BLE - MOS temperature by @mr-manuel
  • Added: JKBMS BLE - Show if balancing is active and which cells are balancing by @mr-manuel
  • Added: JKBMS BLE - Show serial number and "User Private Data" field that can be set in the JKBMS App to identify the BMS in a multi battery environment by @mr-manuel
  • Added: JKBMS BLE driver by @baranator
  • Added: LLT/JBD BMS BLE driver by @idstein
  • Added: Possibility to add config.ini to the root of a USB flash drive on install via the USB method by @mr-manuel
  • Added: Possibility to configure a VOLTAGE_DROP voltage, if you are using a SmartShunt as battery monitor as there is a little voltage difference #632 by @mr-manuel
  • Added: Post install notes by @mr-manuel
  • Added: Read charge/discharge limits from JKBMS by @mr-manuel
  • Added: Recalculation interval in linear mode for CVL, CCL and DCL by @mr-manuel
  • Added: Rename TAR file after USB/SD card install to not overwrite the data on every reboot #638 by @mr-manuel
  • Added: Reset values to None, if battery goes offline (not reachable for 10s). Fixes #193 #64 by @transistorgit
  • Added: Script to install directly from repository by @mr-manuel
  • Added: Seplos BMS driver by @wollew
  • Added: Serial number field (found in the GUI -> SerialBattery -> Device), that show the serial number or a unique identifier for the BMS, if available by @mr-manuel
  • Added: Show charge mode (absorption, bulk, ...) in Parameters page by @mr-manuel
  • Added: Show charge/discharge limitation reason by @mr-manuel
  • Added: Show MOSFET temperature for JKBMS #440 by @baphomett
  • Added: Show serial number (used for unique identifier) and device name (custom BMS field) in the remote console/GUI to identify a BMS in a multi battery environment by @mr-manuel
  • Added: Show specific TimeToSoC points in GUI, if 0%, 10%, 20%, 80%, 90% and/or 100% are selected by @mr-manuel
  • Added: Show TimeToGo in GUI only, if enabled by @mr-manuel
  • Added: Support for HLPdata BMS4S #505 by @peterohman
  • Added: Support for Seplos BMS #530 by @wollew
  • Added: Temperature 1-4 are now also available on the dbus and MQTT by @idstein
  • Added: Temperature name for temperature sensor 1 & 2. This allows to see which sensor is low and high (e.g. battery and cable) by @mr-manuel
  • Changed: reinstall-local.sh to recreate /data/conf/serial-starter.d, if deleted by disable.sh --> to check if the file conf/serial-starter.d could now be removed from the repository by @mr-manuel
  • Changed: Added QML to restore-gui.sh by @mr-manuel
  • Changed: Bash output by @mr-manuel
  • Changed: CVL calculation improvement. Removed cell voltage penalty. Replaced by automatic voltage calculation. Max voltage is kept until cells are balanced and reset when cells are inbalanced or SoC is below threshold by @mr-manuel
  • Changed: Daly BMS - Fixed BMS alerts by @mr-manuel
  • Changed: Daly BMS - Improved driver stability by @transistorgit & @mr-manuel
  • Changed: Daly BMS - Reworked serial parser by @transistorgit
  • Changed: Default config file by @ppuetsch
    • Added missing descriptions to make it much clearer to understand by @mr-manuel
    • Changed name from default_config.ini to config.default.ini #412 (comment) by @mr-manuel
    • Changed TimeToSoc default value TIME_TO_SOC_VALUE_TYPE from Both seconds and time string "<seconds> [<days>d <hours>h <minutes>m <seconds>s]" to 1 Seconds by @mr-manuel
    • Changed TimeToSoc description by @mr-manuel
    • Changed value positions, added groups and much clearer descriptions by @mr-manuel
  • Changed: Default FLOAT_CELL_VOLTAGE from 3.350 V to 3.375 V by @mr-manuel
  • Changed: Default LINEAR_LIMITATION_ENABLE from False to True by @mr-manuel
  • Changed: Disabled ANT BMS by default #479 by @mr-manuel
  • Changed: Driver can now also start without serial adapter attached for Bluetooth BMS by @seidler2547
  • Changed: Feedback from BMS driver to know, if BMS is found or not by @mr-manuel
  • Changed: Fix for #239 by @mr-manuel
  • Changed: Fix for #311 by @mr-manuel
  • Changed: Fix for #351 by @mr-manuel
  • Changed: Fix for #397 by @transistorgit
  • Changed: Fix for #421 by @mr-manuel
  • Changed: Fix for #450 by @mr-manuel
  • Changed: Fix for #648 by @mr-manuel
  • Changed: Fixed black lint errors by @mr-manuel
  • Changed: Fixed cell balancing background for cells 17-24 by @mr-manuel
  • Changed: Fixed cell balancing display for JBD/LLT BMS #359 by @mr-manuel
  • Changed: Fixed Time-To-Go is not working, if TIME_TO_SOC_VALUE_TYPE is set to other than 1 #424 (comment) by @mr-manuel
  • Changed: Improved install workflow via USB flash drive by @mr-manuel
  • Changed: Improved JBD BMS soc calculation #439 by @aaronreek
  • Changed: Logging to get relevant data by @mr-manuel
  • Changed: Many code improvements #393 by @ppuetsch
  • Changed: Moved Bluetooth part to reinstall-local.sh by @mr-manuel
  • Changed: Moved BMS scripts to subfolder by @mr-manuel
  • Changed: Removed all wildcard imports and fixed black lint errors by @mr-manuel
  • Changed: Renamed scripts for better reading #532 by @mr-manuel
  • Changed: Reworked and optimized installation scripts by @mr-manuel
  • Changed: Separate Time-To-Go and Time-To-SoC activation by @mr-manuel
  • Changed: Serial-Starter file is now created from reinstall-local.sh. Fixes also #520 by @mr-manuel
  • Changed: Temperature alarm changed in order to not trigger all in the same condition for JKBMS by @mr-manuel
  • Changed: Time-To-Soc repetition from cycles to seconds. Minimum value is every 5 seconds. This prevents CPU overload and ensures system stability. Renamed TIME_TO_SOC_LOOP_CYCLES to TIME_TO_SOC_RECALCULATE_EVERY by @mr-manuel
  • Changed: Time-To-Soc string from days, HR:MN:SC to <days>d <hours>h <minutes>m <seconds>s (same as Time-To-Go) by @mr-manuel
  • Changed: Uninstall also installed Bluetooth modules on uninstall by @mr-manuel