This is the patch release of the community.network collection.
This changelog contains all changes to the modules in this collection
that have been added after the release of community.network 1.3.6.
- The community.network 1.x.y release stream will be End of Life on 2022-05-23, which coincides with the latest day that community.network 4.0.0 must be released (see the Roadmap for Ansible 6). Thank you very much to everyone who contributed to the 1.x.y releases!
This is the patch release of the community.network collection.
This changelog contains all changes to the modules in this collection
that have been added after the release of community.network 1.3.5.
- Collection core functions - use vendored version of
distutils.versioninstead of the deprecated Python standard librarydistutils.
This is the patch release of the community.network collection.
This changelog contains all changes to the modules in this collection
that have been added after the release of community.network 1.3.4.
- ce - Modify the bug in the query configuration method (#56).
- community.network.ce_switchport - fix error causing by
KeyError:hostdue to properties aren't used anywhere (#313) - exos_config - fix a hang due to an unexpected prompt during save_when (#110).
Bugfix release for ansible-core 2.11 compatibility.
- {cnos,icx}_static_route modules - fix modules to work with ansible-core 2.11 (#228).
Security bugfix (potential information leaks in multiple modules) release.
- avi_cloudconnectoruser - mark the
azure_userpass,gcp_credentials,oci_credentials, andtencent_credentialsparameters asno_logto prevent leaking of secret values (#223). - avi_sslkeyandcertificate - mark the
enckey_base64parameter asno_logto prevent potential leaking of secret values (#223). - avi_webhook - mark the
verification_tokenparameter asno_logto prevent potential leaking of secret values (#223). - panos_sag - mark the
passwordparameter asno_logto prevent potential leaking of secret values (#226).
Security bugfix (potential information leaks in multiple modules, CVE-2021-20191) release.
- ce_vrrp - mark the
auth_keyparameter asno_logto avoid leakage of secrets (#206). - cloudengine/ce_vrrp - enabled
no_logfor the optionsauth_keyto prevent accidental disclosure (CVE-2021-20191, #203). - cnos_* modules - mark the
passwordsparameter asno_logto avoid leakage of secrets (#206). - enos_* modules - mark the
passwordsparameter asno_logto avoid leakage of secrets (#206). - iap_start_workflow - mark the
token_keyparameter asno_logto avoid leakage of secrets (#206). - icx_system - mark the
auth_keyparameter asno_logto avoid leakage of secrets (#206). - itential/iap_start_workflow - enabled
no_logfor the optionstoken_keyto prevent accidental disclosure (CVE-2021-20191, #203). - netscaler/netscaler_lb_monitor - enabled
no_logfor the optionsradkeyto prevent accidental disclosure (CVE-2021-20191, #203). - netscaler_lb_monitor - mark the
passwordandsecondarypasswordparameters asno_logto avoid leakage of secrets (#206).
This release contains no code changes, only announcements in the changelogs and changes to CI.
For community.network 2.0.0, the Cisco NSO modules will be moved to the cisco.nso collection. A redirection will be inserted so that users using ansible-base 2.10 or newer do not have to change anything.
If you use Ansible 2.9 and explicitly use Cisco NSO modules from this collection, you will need to adjust your playbooks and roles to use FQCNs starting with
cisco.nso.instead ofcommunity.network., for example replacecommunity.network.nso_configin a task bycisco.nso.nso_config.If you use ansible-base and installed
community.networkmanually and rely on the Cisco NSO modules, you have to make sure to install thecisco.nsocollection as well. If you are using FQCNs, for examplecommunity.network.nso_configinstead ofnso_config, it will continue working, but we still recommend to adjust the FQCNs as well.For community.network 2.0.0, the FortiOS modules will be moved to the community.fortios collection. A redirection will be inserted so that users using ansible-base 2.10 or newer do not have to change anything.
If you use Ansible 2.9 and explicitly use FortiOS modules from this collection, you will need to adjust your playbooks and roles to use FQCNs starting with
community.fortios.instead ofcommunity.network., for example replacecommunity.network.fmgr_devicein a task bycommunity.fortios.fmgr_device.If you use ansible-base and installed
community.networkmanually and rely on the FortiOS modules, you have to make sure to install thecommunity.fortioscollection as well. If you are using FQCNs, for examplecommunity.network.fmgr_deviceinstead offmgr_device, it will continue working, but we still recommend to adjust the FQCNs as well.
This is the last minor 1.x.0 release. The next releases from the stable-1 branch will be 1.3.y patch releases.
For community.network 2.0.0, the
routerosmodules and plugins will be moved to the community.routeros collection. A redirection will be inserted so that users using ansible-base 2.10 or newer do not have to change anything.If you use Ansible 2.9 and explicitly use
routeroscontent from this collection, you will need to adjust your playbooks and roles to use FQCNs starting withcommunity.routeros.instead ofcommunity.network.routeros_, for example replacecommunity.network.routeros_apiin a task bycommunity.routeros.api.If you use ansible-base and installed
community.networkmanually and rely on therouteroscontent, you have to make sure to install thecommunity.routeroscollection as well. If you are using FQCNs, i.e.community.network.routeros_commandinstead ofrouteros_command, it will continue working, but we still recommend to adjust the FQCNs as well.In community.network 2.0.0, the
fortimanagerhttpapi plugin will be removed and replaced by a redirect to the corresponding plugin in the fortios.fortimanager collection. For Ansible 2.10 and ansible-base 2.10 users, this means that it will continue to work assuming that collection is installed. For Ansible 2.9 users, this means that they have to adjust the FQCN fromcommunity.network.fortimanagertofortios.fortimanager.fortimanager(#151).
- Deprecate connection=local support for network platforms using persistent framework (#120).
- action pugins - add check for network_cli connection type (#119, #120).
- api - fix crash when the
sslparameter is used (ansible-collections/community.routeros#3). - dladm_vnic - fixed issue where setting vlan in Python 3 caused a type error (#131).
- dladm_vnic - vlan IDs 0 and 4095 are now correctly identified as invalid (#132).
- fortimanager httpapi plugin - fix imports to load module_utils from fortios.fortimanager, where it actually exists. Please note that you must have the fortios.fortimanager collection installed for the plugin to work (#151).
- ftd httpapi plugin - make sure that plugin errors out on initialization if the required library is not found, and not on load-time (#150).
- routeros terminal plugin - allow slashes in hostnames for terminal detection. Without this, slashes in hostnames will result in connection timeouts (#138).
Regular bimonthly minor release.
- edgeswitch_facts - added
startupconfigto facts module - to allow the comparision between startup and running config (#105). - routeros_facts - now also collecting data about BGP and OSPF (#101).
- routeros_facts - set configuration export on to verbose, for full configuration export (#104).
Release for Ansible 2.10.0.
- cnos terminal plugin - prevent timeout connection failure by adding "no logging terminal" after log in (#16).
- routeros_api - Ansible module for RouterOS API
This is release 1.0.0 of community.network, released on 2020-07-31.
- onyx - all onyx modules and plugins have been moved to the mellanox.onyx collection. Redirects have been added that will be removed in community.network 2.0.0 (#83).
- edgeos_config - Added cat command to allow display of large files without less. Led to a timeout error. (#79)
- edgeos_config - fixed issue where config could be saved while in check mode (#78)
- edgeos_facts - Added cat command to allow display of large files without less. Led to a timeout error. (#79)
This is the first proper release of the community.network collection on 2020-06-20.
The changelog describes all changes made to the modules and plugins included in this
collection since Ansible 2.9.0.
- ce_bgp_neighbor_af - Rename the parameter
redirect_ip_vaildationtoredirect_ip_validation(ansible/ansible#62403).
- routeros_facts - allow multiple addresses and neighbors per interface. This makes
ansible_net_neighborsa list instead of a dict (#6).
- Cloudengine module_utils - the
set-id(RPC-REPLY XML attribute) may change over the time althougthset-idis the identity of the next RPC packet. - Cloudengine netconf plugin - add a dispatch RPC function,just return original RPC-REPLY, the function is used by
Cloudengine module_utils. - Fixes in network action plugins to work in network connection plugin and modules in collection
- Make netconf plugin configurable to set ncclient device handler name in netconf plugin (ansible/ansible#65718)
- Some cloudengine modules have options which should have been removed for Ansible 2.9. see ansible/ansible#67020 and #68
- Some cloudengine modules were missing
import __future__andmetaclass. (ansible/ansible#67634). - Some cloudengine modules were missing
import __future__andmetaclass. (ansible/ansible#67635). - action/ce - fix a bug, some new version os will not discard uncommitted configure with a return directly.(ansible/ansible#63513).
- ce - Modify exception handling method to make display information more obvious (#51).
- ce - Modify the way of parsing NETCONF XML message in ce.py (#39).
- ce_config - fixed issue - Re-building commands(config src) by replacing '#' with 'quit','quit' commands may close connection (ansible/ansible#62872)
- ce_is_is_interface - fix compile error for Python 3.9 (#36).
- edgeos_config - fix issue where module would silently filter out encrypted passwords
- edgeos_config - fixed issue of handling single quotation marks. Now fails when unmatched (odd numbers)
- edgeos_config - fixed issue where any change in check mode would cause all subsequent tasks to be treated as changes
- netscaler_nitro_request - use all filters for get_filtered instead of only the first one (#48).
- plugins-netconf-ce - Fix failed to get version information.
- plugins-netconf-ce - to get attribute 'set-id' from rpc-reply.
- routeros module_utils - created a
try/exceptblock on the functionget_capabilities(#27). - routeros_facts - Prevent crash of module when
ipv6package is not installed
- apconos_command - Run arbitrary commands on APCON devices
- ce_is_is_instance - Manages isis process id configuration on HUAWEI CloudEngine devices.
- ce_is_is_interface - Manages isis interface configuration on HUAWEI CloudEngine devices.
- ce_is_is_view - Manages isis view configuration on HUAWEI CloudEngine devices.
- ce_lacp - Manages Eth-Trunk interfaces on HUAWEI CloudEngine switches
- ce_lldp - Manages LLDP configuration on HUAWEI CloudEngine switches.
- ce_lldp_interface - Manages INTERFACE LLDP configuration on HUAWEI CloudEngine switches.
- ce_mdn_interface - Manages MDN configuration on HUAWEI CloudEngine switches.
- ce_multicast_global - Manages multicast global configuration on HUAWEI CloudEngine switches.
- ce_multicast_igmp_enable - Manages multicast igmp enable configuration on HUAWEI CloudEngine switches.
- ce_static_route_bfd - Manages static route configuration on HUAWEI CloudEngine switches.
- exos_l2_interfaces - Manage L2 interfaces on Extreme Networks EXOS devices.
- exos_lldp_interfaces - Manage link layer discovery protocol (LLDP) attributes of interfaces on EXOS platforms.
- exos_vlans - Manage VLANs on Extreme Networks EXOS devices.
- onyx_aaa - Configures AAA parameters
- onyx_bfd - Configures BFD parameters
- onyx_ntp - Manage NTP general configurations and ntp keys configurations on Mellanox ONYX network devices
- onyx_ntp_servers_peers - Configures NTP peers and servers parameters
- onyx_snmp - Manages SNMP general configurations on Mellanox ONYX network devices
- onyx_snmp_hosts - Configures SNMP host parameters
- onyx_snmp_users - Configures SNMP User parameters
- onyx_syslog_files - Configure file management syslog module
- onyx_syslog_remote - Configure remote syslog module
- onyx_username - Configure username module